![](https://sec.cloudapps.cisco.com/security/center/images/blue-square.png)
CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:X/RL:X/RC:X
-
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device.
The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp
-
Vulnerable Products
This vulnerability affects the following Cisco Small Business routers if they are running a vulnerable firmware release:
- RV110W Wireless-N VPN Firewall
- RV130 VPN Router
- RV130W Wireless-N Multifunction VPN Router
- RV215W Wireless-N VPN Router
For information about which Cisco firmware releases are vulnerable, see the Fixed Software section of this advisory.
The web-based management interface of these devices is available through a local LAN connection, which cannot be disabled, or through the WAN connection if the remote management feature is enabled. By default, the remote management feature is disabled for these devices.
To determine whether the remote management feature is enabled for a device, administrators can open the web-based management interface and choose Basic Settings > Remote Management. If the Enable box is checked, remote management is enabled for the device.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
-
There are no workarounds that address this vulnerability.
However, disabling the remote management feature, if it is not required, would help to reduce the attack surface of this vulnerability.
-
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Customers are advised to upgrade to an appropriate fixed firmware release as indicated in the following table:
Cisco Product First Fixed Release RV110W Wireless-N VPN Firewall 1.2.2.8 RV130 VPN Router 1.0.3.54 RV130W Wireless-N Multifunction VPN Router 1.0.3.54 RV215W Wireless-N VPN Router 1.3.1.7 To download the software from the Software Center on Cisco.com, do the following:
RV110W and RV215W
- Click Browse all.
- Choose Routers > Small Business Routers > Small Business RV Series Routers > RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router > Wireless Router Firmware.
- Choose a release from the left pane of the RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router page.
RV130 and RV130W
- Click Browse all.
- Choose Routers > Small Business Routers > Small Business RV Series Routers > RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router > Small Business Router Firmware.
- Choose a release from the left pane of the RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router page.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
Cisco would like to thank Gyengtak Kim, Jeongun Baek, and Sanghyuk Lee of GeekPwn for reporting this vulnerability.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Version Description Section Status Date 1.0 Initial public release. — Final 2020-JUL-15
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.