Procedure to Enable SHA256 Based Encryption

Available Languages

Download Options

  • PDF     (5.3 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (71.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (64.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:October 20, 2017
Document ID:212526

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document describes how to enable SHA256 based encryption on Unified Customer Voice Portal (CVP).

    Prerequisites

    Requirements

      

    Cisco recommends that you have knowledge of these topics:

    • Unified CVP

    Components Used

      

    The information in this document is based on these software and hardware versions:

    • Unified CVP 10.5, 11.0

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

    Question

    How to enable SHA256 based encryption?

    Answer

    • For Unified CVP 11.0 Install ET : CVP11.0(1) ET20 - ET - SHA256 Enabling
    • For Unified CVP 10.5 Install ET : CVP10.5(1) ET18 - ET - SHA256 Enabling

    TAC Authored

    Contributed by Cisco Engineers

    • Natalia Fuentes Fuentes
      Cisco TAC Engineer

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products