Field Notice: *Expired* FN - 12157 - Release 1.03-RTRV-ALM-LOG Does Not Function

Available Languages

Updated:July 10, 2007
Document ID:FN12157

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.


Revised July 10, 2007

April 12, 2000

NOTICE:

THIS FIELD NOTICE HAS BEEN ARCHIVED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Product

Comments

Cisco ONS 15454

Formerly Cerent 454

Problem Description

The Transaction Language 1 (TL1) command RTRV-ALM-LOG is not functional in Release R1.03.

Background

In Release R1.03:

  • The TL1 command RTRV-ALM-ALL was fixed.

  • An improperly generated BellCore GR-253-Core Channel Mismatch Alarm was fixed.

  • The TL1 command RTRV-ALM-LOG was not functional.

Problem Symptoms

The RTRV-ALM-LOG TL1 command was not functional in Release R1.03 and has been fixed in this release. The command gives the ability to access a stored record of the most recent alarms.

Workaround/Solution

If your system is running release R1.02, you are not using TL1, and you are not interoperating with other vendor. s equipment, an upgrade to release R1.04 is not required.

If you must upgrade your system, please follow the upgrade procedure in the Cerent User Documentation, which can be found on the software CD. This release incorporates all the fixes of Release R1.03 and corrects the problems outlined in Cisco Field Notice 1: Release 1.0 - Improperly Generated Protection Switch Channel Mismatch Alarm.

The Cisco Field Service organization will contact you about distribution of this software release.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products