Field Notice: FN - 62323 - The AIR-ANT5145V-R Mounting Bracket Now Includes Two Clips For Quick Mounting

Available Languages

Updated:February 17, 2006
Document ID:FN62323

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.


February 17, 2006

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

  • AIR-ANT5145V-R=

Problem Description

The mounting bracket for the antenna now includes two clips bolted to the bracket. This allows the antenna to be clipped to a dropped ceiling grid for a quick mount installation. The antenna comes with its original mounting hardware as well.

Background

Customers have requested this quick mount installation because the traditional mounting method takes too long. Customers will be able to mount the antenna in the same manner they have in the past. Now customers have one more choice to attach it to the ceiling.

Workaround/Solution

Customers can use the old method of mounting or the new. Neither interfere with each other and the customer can select the mounting method for their installation.

Further Assistance

If you require further assistance or if you have any further questions regarding this field notice, contact the Jennifer Adams - jenadams@cisco.com

Revision History

Revision

Date

Comment

1.0

17-FEB-2006

Initial Public Release

NetPro Discussion Forums - Featured Conversations

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products