How do I install feature keys on a Cisco Email or Web Security Appliance?

Available Languages

Updated:October 13, 2014
Document ID:118453

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Question:

How do I install Feature keys on a Cisco Email or Web Security Appliance?

Environment:

Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), Security Management Appliance (SMA), all versions of AsyncOS

You can install feature keys on ESA, WSA orSMA via the CLI or the GUI. Please see the instructions for each below:

CLI

-------------------------------------------

CLI> featurekey

Enter feature key, or press Enter to go to the main prompt.
[]> <feature key >

GUI

-------------------------------------------

  1. Under 'System Administration' ---> 'Feature Keys', in the 'Feature Activation' section, enter the feature key into the 'Feature Key' field.
  2. Click 'Submit key'.

Revision History

Revision Publish Date Comments
1.0
13-Oct-2014
Initial Release
TAC Authored

Contributed by Cisco Engineers

  • John Yu and Siddharth Rajpathak
    Cisco TAC Engineers.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products