Media Access Control (MAC) Address Clone on the CVR100W VPN Router

Available Languages

Download Options

  • PDF     (336.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (378.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (147.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB4618

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Media Access Control (MAC) Address Clone on the CVR100W VPN Router

Objective

MAC address clone is used to duplicate the exact copy of the MAC address of one machine to another machine. Usually, the Internet Service Provider (ISP) needs to register the MAC address of your device to uniquely identify your device, in order to authenticate it. If you previously registered any other MAC address with your ISP, you can clone that MAC address to the CVR100W VPN Router. You can even clone the MAC address of your PC to your device. This article explains how to clone MAC addresses on the CVR100W VPN Router.

Applicable Device

• CVR100W VPN Router

Software Version

• 1.0.1.19

Clone MAC Address

Step 1. Log in to the web configuration utility and choose Networking > WAN > MAC Address Clone. The MAC Address Clone page opens:

Step 2. Check the Enable check box in the MAC Address Clone field to enable the Mac Address Clone feature.

Step 3. Choose one of the following in the MAC Address field to set the MAC address of the CVR100W's WAN port:

• Click Clone My PC's MAC to set the MAC address of the WAN port to the same as your PC's MAC address.

• Enter a specific address in the MAC Address field to specifically assign a different MAC address to the WAN port.

Step 4. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco