Objective

The Do-Not-Disturb Mode turns off the LEDs on the front panel of the CVR100W Router. This feature makes the device more energy efficient.

This article explains how to enable the Do-Not-Disturb Mode on the CVR100W VPN Router.

Applicable Device

• CVR100W VPN Router

Software Version

• 1.0.1.19

Do Not Disturb Mode

Step 1. Log in to the web configuration utility and choose Administration > Do-Not-Disturb Mode. The Do-Not-Disturb Mode page opens:

Step 2. In the Do-Not-Disturb Mode field, check the Enable check box to turn off the LEDs on the front panel of the device.

Step 3. Click Save.