When attempting to add a DSL WAN connection on the RV134W router, an option does not exist to add Packet Transfer Mode (PTM).
October 10, 2016
March 29, 2017
RV134W v1.0.0.21
If you want to verify the issue being described, follow the steps below:
Step 1. Log in to the web-based utility and choose Networking > WAN > WAN Configuration.
Step 2. Under the xDSL WAN table of the WAN Connection area, click the Add Row button.
Step 3. Under the DSL Settings area, the Transfer Mode is set to ATM. There is no way to configure PTM.
This issue will be fixed in the next firmware release of the RV134W.