SG350XG: PoE Consumption Values for Hours, Days, and Weeks Show 0

Available Languages

Download Options

  • PDF     (3.6 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (46.6 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (64.4 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5676

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: PoE Consumption Values for Hours, Days, and Weeks Show 0

Date Identified

May 23, 2017

Date Resolved

N/A

Product Affected

Model

Firmware Version

SG350XG

2.2.0.x  

Problem Description

When defining a time range for a Power over Ethernet (PoE) operation and the time range does not include the hour (00:00) as the active time, the PoE consumption values for hours, days, and weeks show 0 even when there is a consumption during the displayed period. The time in minutes display correct values.

Current Status

There is no known workaround.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco