CPU Utilization on the 200/300 Series Managed Switches

Available Languages

Download Options

  • PDF     (110.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (144.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (157.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 18, 2017
Document ID:SMB88

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

CPU Utilization on the 200/300 Series Managed Switches

Objective

CPU utilization is a diagnostic tool that examines how much of the CPU is in use. Too much CPU usage can lead to slower response times from your switch.

This document explains how to use CPU utilization on the 200/300 Series Managed Switches.

Applicable Devices

  • SF/SG 200 and SF/SG 300 Series Managed Switches

Software Version

  • v1.3.0.62

Enable and Display CPU Utilization

Step 1. Log in to the web configuration utility and choose Administration > Diagnostics > CPU Utilization. The CPU Utilization page opens:

Step 2. Check the Enable check box in the CPU Utilization field to edit the CPU utilization information.

Step 3. Click a radio button in the Refresh Rate field. The refresh rate is the time (in seconds) that passes before the CPU statistics are refreshed. A new sample is created for each time interval.

Note: The CPU Input Rate field displays the rate of input frames to the CPU per second.

Step 4. Click Apply to apply the new refresh rate and begin sampling CPU Utilization. The CPU usage is displayed in a graph where the Y axis is the percentage of usage and the X axis is the sample number.

Revision History

Revision Publish Date Comments
1.0
10-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco