Enabling TCP Congestion Avoidance on SX500 Series Stackable Switches

Available Languages

Download Options

  • PDF     (43.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (86.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (75.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 2, 2017
Document ID:SMB2739

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Enabling TCP Congestion Avoidance on SX500 Series Stackable Switches

Objective

TCP Congestion Avoidance is a technique which includes additive increase or multiplicative decrease and slow start schemes to avoid congestion in the network. When a TCP session is established, it is highly possible that network congestion can result between the TCP end points, which results in the loss of segments transmitted. Flow control does not address congestion problems, to address these problems a set of congestion avoidance algorithms are introduced. These algorithms allow TCP to better prioritize important packets which helps avoid congestion.

The objective of this document is to explain how to enable TCP congestion avoidance on Sx500 Series Stackable Switches.

Applicable Devices

• Sx500 Series Stackable Switches

Software Version

• 1.3.0.62

Enable TCP Congestion Avoidance

Step 1. Log in to the web configuration utility and choose Quality of Service > General > TCP Congestion Avoidance. The TCP Congestion Avoidance page opens:

Step 2. Check Enable to enable TCP Congestion Avoidance.

Step 3. Click Apply. TCP Congestion Avoidance is written to the running configuration file.

Revision History

Revision Publish Date Comments
1.0
11-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco