System Settings on the Sx500 Series Stackable Switches

Available Languages

Download Options

  • PDF     (80.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (119.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (169.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2896

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

System Settings on the Sx500 Series Stackable Switches

Objective

The System Settings page is used to customize the display results of the switch. The display can contain a banner message to allow access to only authenticated users. The objective of this document is to help configure the System Administration Settings on the Sx500 Series Stackable Switches. 

Applicable Devices

• Sx500 Series Stackable Switches

Software Version

• 1.3.0.62

Step-by-Step Procedure

Step 1. Log in to the web configuration utility, and choose Administration>System Settings. The System Settings page opens: 

 

Step 2. In the System Location field, enter a character value that corresponds to the physical location of the switch.

Step 3. In the System Contact field, enter a character value that corresponds to the name of the contact person.

Step 4. In the Host Name field choose one of these two options: 

• Use Default — Allows you to use the default switch name.

• User Defined — Allows you to enter a name in the field to assign to the switch.

Step 5. In the Login Banner field, enter the text that you wish to display on the Login page.

Step 6. (Optional) Click Preview to view the typed text. Close the preview window.

Step 7. Click Apply in the System Settings page to save the configuration.

Revision History

Revision Publish Date Comments
1.0
13-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco