Configuration of Reserved MAC Address on Sx500 Series Stackable Switches

Available Languages

Download Options

  • PDF     (30.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (72.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (123.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2953

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuration of Reserved MAC Address on Sx500 Series Stackable Switches

Objective

A Media Access Control (MAC) address is a unique 48-bit data link layer address represented in hexadecimal format that is assigned to every device that connects to the Internet. The MAC addresses that range from 00-00-5E-00-00-00 to 00-00-5E-00-00-FF are reserved. A switch, which is a data link layer device, uses a MAC address to forward a frame to its destination port. 

The objective of this document is to show you how to add reserved MAC addresses to the MAC address table, and whether to bridge or delete the frame when it is destined to the reserved MAC address on the Sx500 Series Stackable Switches.

Applicable Devices

• Sx500 Series Stackable Switches

Software Version

• v1.2.7.76

Reserved MAC Address Configuration

Step 1. Log in to the web configuration utility and navigate to MAC Address Tables > Reserved MAC Addresses. The Reserved MAC Addresses page opens:

Step 2. Click Add to add and configure the reserved MAC address. The Add Reserved MAC Address window appears.

Step 3. Choose the desired reserved MAC address from the MAC Address drop-down list that is to be reserved.

Step 4. Select the desired radio button in the Frame Type field that defines the frame to be used with the chosen reserved MAC address.

• Ethernet V2 — Ethernet Version 2 frame type identifies an upper layer protocol encapsulating the frame data.

• LLC — Logical Link Control (LLC) is often referred as IEEE 802.2 which uses source service access point (SSAP) and destination service access point (DSAP) .

• LLC-SNAP — Logical Link Control-Subnetwork access protocol (LLC-SNAP) frame type, where DSAP and SSAP fields are set to the value 0xAA (hexadecimal value), identifies the protocol used on top of the LLC sublayer.

• All — Includes all frame types. 

Step 5. Click the desired radio button in the Action field that defines the action to be taken by the switch when it receives the frame from a MAC address with the above matched conditions.

• Bridge — Forward the frame to all the ports of a VLAN.

• Discard — Delete the frame.

Step 6. Click Apply to save the settings.

Step 7. (Optional) To edit the reserved MAC address information, click the desired MAC address in the Reserved MAC Address Table and click Edit.

Step 8. (Optional) To delete the reserved MAC address from the Reserved MAC Address Table, click the desired MAC address and click Delete.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco