Call Forward Setup via Softkey and Starcode on the Cisco SPA300 series IP Phone

Available Languages

Download Options

  • PDF     (7.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (51.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (79.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 10, 2018
Document ID:SMB1909

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Call Forward Setup via Softkey and Starcode on the Cisco SPA300 series IP Phone

Objective

The call forward feature allows the user to forward all calls to a single number, forward calls when the phone is busy or when the phone is not answered.

This document explains how to activate or deactivate the call forward feature on the Cisco SPA300 series IP Phone.

Applicable Devices

• SPA301 IP Phone
• SPA303 IP Phone

Call Forward Setup

Configuration via Softkey

Step 1. Press the CFwdAll softkey. Enter the number to which the incoming calls should be forwarded to.

Note: The user can either use a voice mailbox number, another extension or an outside number to forward calls to.

Step 2. To stop call forwarding, press the CFwdAll softkey again.

Configuration via star code for forwarding all calls

Step 1. Dial *72 and enter the number to which the calls should be forwarded to.

Step 2. To deactivate call forwarding, enter *73.

Configuration via star code for forwarding calls when the IP phone is busy

Step 1. To activate call forwarding when the phone is busy, dial *90 and enter the number to which the calls should be forwarded to.

Step 2. To deactivate call forwarding when the phone is busy, enter *91.

Configuration via star code for forwarding calls when the IP phone is not answered

Step 1. To activate call forwarding when the phone is not answered, dial *92 and then enter the number to which the calls should be forwarded to.

Step 2. To deactivate call forwarding when the phone is not answered, enter *93.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco