Placing a Call Using Redial for SPA525G or SPA525G2

Available Languages

Download Options

  • PDF     (52.9 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (69.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (111.6 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB2205

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Placing a Call Using Redial for SPA525G or SPA525G2

Objective

Redial is an operation on a phone that allows the operator to call the last person dialed out on the phone.
This article describes how to redial on a SPA525G or a SPA525G2 phone.

Applicable Devices

• SPA525G
• SPA525G2

Step-by-Step Process

Redial

Step 1. Select Redial on the phone.

Step 2. Using the navigation buttons, scroll up and down to select the number you wish to redial. Then hit select to make the phone call.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco