Log Viewer on SPA100 Series

Available Languages

Download Options

PDF (46.7 KB)
View with Adobe Reader on a variety of devices
ePub (84.1 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (125.9 KB)
View on Kindle device or Kindle app on multiple devices

Updated:December 11, 2018

Document ID:SMB2686

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Log Viewer on SPA100 Series

Objective

This article is helpful if the administrator wants to check the recorded incoming, outgoing and Dynamic Host Configuration Protocol (DHCP) list of various events occurred on the network for future concerns which includes troubleshoot incoming and outgoing traffic and keep an eye on the different IP addresses that has been accessed on the network. The objective of this document is to view the logs online and to download the system log file to computer so the administrator can see the incoming and outgoing traffic on the network.

Applicable Devices

• SPA 100 Series

Software Version

• v1.1.0

View Logs

Note: The prerequisite to view the logs is to first enable the logs on the device. For more information on how to enable logs on SPA100 series, search for the article Configure Log Module on SPA100 series for further help.

Step 1. Log in to the web configuration utility and choose Administration > Log > Log Viewer. The Log Viewer page opens:

Step 2. Click Download Log to download the contents of the log as a file on your computer. This downloads all the types of logs as a .txt file to the computer. The file can be opened in a text editor such as Notepad.

Step 3. If the administrator wants to review a particular type of logs, then choose the type of content to display from the Display drop-down list and click Download Log. Again a new .txt file is saved on the computer which only displays the contents of that type of log. The possible options for the type of logs are

• All — Displays all logs, both kernel and system logs in the downloaded file.

• Kernel — Kernel is the initial part of the operating system that is loaded in to the memory and it remains in that location throughout the entire session. This field displays logs created by kernel only.

• System — This displays user-space applications logs such as Network Time Protocol (NTP), Session and Dynamic Host Configuration Protocol (DHCP).

Step 4. The administrator can also enter a keyword to filter the log entries that appears in the file. Enter any keyword that the administrator wants to view in the Filter field.