Connect a Wired Computer to a Cisco Small Business VoIP Router

Available Languages

Download Options

PDF (163.2 KB)
View with Adobe Reader on a variety of devices

Updated:December 12, 2008

Document ID:108645

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction
How do I connect my PC to the Cisco Small Business VoIP Router?
Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How do I connect my PC to the Cisco Small Business VoIP Router?

A wired PC is a computer that you directly connect to the router via Ethernet cable. The wired computer needs to have an Ethernet adapter in order to establish the connection to your router.

Note: This document assumes that another PC is already online with the router.

Connect the PC to the LAN Port of the Router?

Complete these steps in order to connect the PC to the LAN port of the Cisco Small Business router:

Take an Ethernet cable and connect it to the computer. Take the other end of that same cable and connect it to ports 1, 2, 3, or 4 at the back of the router.