Contents

Introduction

How can I set up the Wireless Settings on a Cisco Small Business VOIP Router?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How can I set up the Wireless Settings on a Cisco Small Business VoIP Router?

A.

In order to set up and improve your wireless network's signal, change your Wireless Network Name (SSID) and/or try using a different channel. For instructions, complete these steps:

Change your Router's SSID and Channel

Step 1:

Access the router's web-based setup page. For instructions, click here.

Step 2:

When the router's web-based setup page appears, click Wireless.

Step 3:

Look for Wireless Network Name (SSID). If it is still set to "linksys", change it to something unique. and click Save Settings.

Step 4:

After you change your SSID, try to change channels in order to get around interferences. Preferred channels to use are 1, 6, and 11 since they are considered non-overlapping channels.

Step 5:

Click .

Related Information

- Technical Support & Documentation - Cisco Systems