IPIVR File System Errors

Available Languages

Updated:August 25, 2011

Document ID:112904

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Problem

Solution

Problem

Solution

Related Information

Introduction

This document provides information on how to troubleshoot the issue of the IPIVR server receiving file system error messages.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco Unified Contact Center Express (UCCX) 8.0(1).

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Problem

With Cisco Unified Contact Center Express 8.0(1), the IPIVR server experiences file system error messages after an unexpected shutdown.

EXT3-fs error (device sda6) in start_transaction: Journal has aborted.

After a login via SSH to the CLI, this output is received:

 WARNING:
        The /common file system is mounted read only.
        Please use Recovery Disk to check the file system using fsck.

Solution

This issue is documented by Cisco bug ID CSCti28336 (registered customers only) , where the Cisco Unified Communications Manager (CUCM) recovery CD will need to be used in order to run the file system check as root access is disabled by default on the UCCX server. Therefore, fsck cannot be run. Perform these steps:

Boot the system using the CUCM recovery disk.
From the recovery CD menu, choose option 'f' to run the file system check.

Note: This might be a different option, so you need to ensure that the letter or number displayed to run the file system check is chosen.
When completed, choose option 'q' to quit the recovery CD.
Eject the CD when prompted, then reboot the system.

Problem

A partial message is played when using TTS for the synthesis of Russian speech.

Solution

The cause of this issue can be UCCX's VoiceBrowser sending the wrong Content-Length, if a line contains non-English letters. VoiceBrowser passes number of characters instead of the row size in bytes. This leads to a problem with TTS playing. Only 50% of the message gets played because the size of a non-English letter can be two bytes (unlike one byte for English). For more information, refer to Cisco bug ID CSCtr28214 (registered customers only) .

Note: Also, refer to Cisco bug ID CSCtq52199 (registered customers only) .