show Commands for Frame Relay Traffic Shaping

Available Languages

Download Options

  • PDF     (35.9 KB)
    View with Adobe Reader on a variety of devices
Updated:November 17, 2007
Document ID:9335

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document explains the specific show commands available for Frame Relay traffic shaping.

These are:

  • show frame-relay pvc <dlci>

  • show traffic-shape

  • show traffic-shape statistics

This document provides a listing of the fields produced in the output of these commands, and a description of each field.

Before You Begin

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Prerequisites

Readers of this document should be knowledgeable of the following:

  • Basic knowledge of frame-relay and frame-relay traffic shaping.

  • Configuring frame-relay traffic shaping.

For more information, please refer to the Related Information

Revision History

Revision Publish Date Comments
1.0
17-Nov-2007
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products