Maintaining the Cisco cBR Chassis
Powering Down the Cisco cBR Chassis
- Transporting the chassis to a new location
- Repairing or upgrading the chassis hardware
- Mounting the chassis
Before you begin
Procedure
Step 1 |
Push the toggle switch on the FPEM (AC or DC) on the rear of the chassis to OFF position. |
Step 2 |
What to do next
Unmounting the Cisco cBR Chassis
Before you begin
-
Install the chassis installation handle (Optional).
Required Tools and Equipment
-
#2 Phillips screwdriver
Procedure
Step 1 | |
Step 2 | |
Step 3 |
Remove all external cables. |
Step 4 |
Loosen the screws inserted into the side cable management bracket using a #2 Phillips screwdriver. |
Step 5 |
Loosen the screws inserted into the rack mount ear on each side using a #2 Phillips screwdriver. |
Step 6 |
Remove the chassis from the rack. |
What to do next
-
To return the equipment to Cisco, pack the chassis in the original Cisco box that you received during shipment and visit Cisco Ordering website.