Troubleshooting: The cable modems are not in init() state
Problem The cable modems are not in init() state.
Possible Cause PTP is not aligned.
Solution Use the show ptp clock running command to check ptp clock state.
NG13#show ptp clock running
PTP Ordinary Clock [Domain 0]
State Ports Pkts sent Pkts rcvd Redundancy Mode
PHASE_ALIGNED 1 1666420 5051243 Hot standby
PORT SUMMARY
PTP Master
Name Tx Mode Role Transport State Sessions Port Addr
slave-from-903 unicast slave Lo1588 Slave 1 10.90.3.93