System Requirements
These sections describe the system requirements for Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases:
Memory Requirements for Cisco 1x2 / Compact Shelf RPD Software 5.1.1
Note |
Memory is not configurable for the Cisco Remote-PHY device. |
Feature Set |
Cisco RPHY Processor |
Software Image |
Fixed Memory |
Runs From |
---|---|---|---|---|
CISCO RPHY 5.1.1 |
NXP LS1043A |
RPD-V5-1-1.itb.SSA |
1G Bytes |
Bootflash: |
Hardware Supported
For detailed information about the hardware supported in Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Determining the Software Version for Cisco 1x2 / Compact Shelf RPD Software 5.1.1
To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote-PHY Device, log in and enter the show version EXEC command:
R-PHY#sho version
Cisco RPD Software, version v5.1.1, build by rpd-release, on 2018-09-29 00:01:32
Branch information:
RPD branch: (detached from RPD_V5_1_1_201809291)
OpenRPD branch: (detached from RPD_V5_1_1_201809291)
SeresRPD branch: (detached from RPD_V5_1_1_201809291)
Note |
System image file name for a factory installed image is /bootflash/RPD-V5.1.1_hardware_certificate.itb.rel.sign.SSA. System image file name for a Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V5-1-1.itb.rel.sign.SSA.act. |