Contents
- Cisco EasyQoS Application for APIC-EM Release Notes, Release 1.4.1.x
- What’s New in Cisco EasyQoS for APIC-EM, Release 1.4.1.x
- Cisco EasyQoS Supported Platforms and Software Requirements
- Installing or Upgrading EasyQoS
- Caveats
- Open Caveats
- Resolved Caveats
- Using the Bug Search Tool
- EasyQoS Limitations and Restrictions
- Service and Support
- Troubleshooting
- Related Documentation
- Cisco APIC-EM Controller Documentation
- Cisco Network Visibility Application Documentation
- Cisco EasyQoS Application Documentation
- Cisco Path Trace Application Documentation
- Cisco IWAN Application Documentation
- Cisco Network Plug and Play Application Documentation
- Cisco APIC-EM Developer Documentation
- Obtaining Documentation and Submitting a Service Request
- Notices
- Trademarks
First Published: April 04, 2017
Cisco EasyQoS Application for APIC-EM Release Notes, Release 1.4.1.x
This document describes the Cisco EasyQoS features, limitations, and bugs for release 1.4.1.x.
Along with Cisco EasyQoS, Cisco APIC-EM supports the following additional applications:
For information about the Cisco APIC-EM controller infrastructure (system requirements, security, licensing, supported multi-host configurations, and so on) and the other Cisco APIC-EM applications, see their corresponding release notes at the following URL:
What’s New in Cisco EasyQoS for APIC-EM, Release 1.4.1.x
The Cisco APIC-EM software release provides the following new EasyQoS app features and functions:
New host tracking feature that tracks collaboration endpoints in your network and dynamically reapplies policies to match voice and video traffic. You enable this feature by accessing the Policies window in the Cisco APIC-EM GUI and clicking Create Policy. Next, find Host Tracking and click Enabled (the default is Disabled). After clicking Enabled, read the pop-up window description of the feature and click OK.
Resolution of several pre-existing issues and is designed to enhance your controller’s performance and stability.
Cisco EasyQoS Supported Platforms and Software Requirements
For information about the network devices and software versions supported for this release by the EasyQoS app, see Supported Platforms for the Cisco Application Policy Infrastructure Controller Enterprise Module.
Installing or Upgrading EasyQoS
The EasyQoS image is built into the APIC-EM controller image. When you install or upgrade Cisco APIC-EM, the Cisco EasyQoS application is installed or upgraded as well.
After installing or upgrading the APIC-EM software, you can begin to use EasyQoS by enabling the application. For information about how to enable applications, see the Cisco Application Policy Infrastructure Controller Enterprise Module Administration Guide. For any of the following information, see these sources:
Table 1 Information Sources for Installing or Upgrading EasyQoS Information
Source
Installing APIC-EM or EasyQoS
Cisco Application Policy Infrastructure Controller Enterprise Module Installation Guide
Upgrading APIC-EM or EasyQoS
Cisco Application Policy Infrastructure Controller Enterprise Module Upgrade Guide
Obtaining bug information about APIC-EM
Cisco Application Policy Infrastructure Controller Enterprise Module Release Notes Caveats
Open Caveats
The following table lists the open caveats for this release.
Resolved Caveats
The following table lists the resolved caveats for this release.
Note
For a list of caveats resolved in an earlier software release, see the Cisco APIC-EM release notes for the specific release.
Bug ID Number
Headline
When a network device with an existing QoS configuration on a VLAN interface is updated with a port-based QoS configuration from EasyQoS, the pre-existing QoS configuration does not get removed as expected.
Policy configuration may fail on the Cisco Catalyst 4500 port-channel interface leading to an infinite policy installation loop in the Cisco APIC-EM controller.
Static policies for collaboration endpoints are pushed dynamically without admin authorization and knowledge.
When using the schedule to apply a policy, the schedule and a stale app window may overlap in the display.
EasyQoS applies commands twice on collaboration devices, such as Cisco phones. This situation occurs when a collaboration device accesses a switch, and the switch is configured for SNMP traps to be sent to the Cisco APIC-EM.
Using the Bug Search Tool
Procedure
Step 1 Go to http://tools.cisco.com/bugsearch. Step 2 At the Log In screen, enter your registered Cisco.com username and password; then, click Log In. The Bug Search page opens.
Note If you do not have a Cisco.com username and password, you can register for them at http://tools.cisco.com/RPF/register/register.do.
Step 3 To search for a specific bug, enter the bug ID in the Search For field and press Return. Step 4 To search for bugs in the current release:
EasyQoS Limitations and Restrictions
The EasyQoS application has the following limitations and restrictions.
Note
Refer to the other Cisco APIC-EM application release notes or Cisco APIC-EM controller release notes for information about any other application or infrastructure-specific issues.
Custom apps created using the EasyQoS GUI application require an IP address (mandatory field). Custom apps created using the API do not require an IP address (optional field). Custom apps created without an IP address using the API will fail when applied to a NBAR router. NBAR routers do not support applications without an IP address. To apply the policy on NBAR routers, please remove the custom app from the list.
When removing a network device from a scope in EasyQoS, options that permit you to restore to the original policy or delete the policy are not triggered. Additionally, unlike the option in EasyQoS that permits you to reapply a policy, there are no options to restore an original policy or to delete a policy when a policy fails on the network devices.
For the EasyQoS application, the maximum number of devices that can be configured for a scope is 2000.
Cisco EasyQoS is not supported on the Cisco ASR 1000 series router running Cisco IOS XE 16.3.1.
Within the EasyQoS application, Dynamic QoS is a beta functionality for this release.
Important:For specific EasyQoS feature support and restrictions by platform and line card, see Supported Platforms for the Cisco Application Policy Infrastructure Controller Enterprise Module.
Service and Support
Troubleshooting
See the Cisco Application Policy Infrastructure Controller Enterprise Module Troubleshooting Guide, for troubleshooting procedures.
Related Documentation
The following publications are available for the Cisco APIC-EM:
Cisco APIC-EM Controller Documentation
For this type of information...
See this document...
Release information, including new features, system requirements, and open and resolved caveats.
Cisco Application Policy Infrastructure Controller Enterprise Module Release Notes
Installation and configuration of the controller, including post-installation tasks.
Cisco Application Policy Infrastructure Controller Enterprise Module Installation Guide
Introduction to the Cisco APIC-EM GUI and its applications.
Cisco Application Policy Infrastructure Controller Enterprise Module Quick Start Guide 1
Configuration of user accounts, RBAC scope, security certificates, authentication and password policies, and global discovery settings.
Monitoring and managing Cisco APIC-EM services.
Backup and restore.
Cisco APIC-EM APIs.
Cisco Application Policy Infrastructure Controller Enterprise Module Administrator Guide
Troubleshooting the controller, including the installation, services, and passwords.
Developer console.
How to contact the Cisco Technical Assistance Center (TAC).
Cisco Application Infrastructure Controller Enterprise Module Troubleshooting Guide
Tasks to perform before updating the controller to the latest version.
Software update instructions.
Tasks to perform after an update.
Cisco Application Infrastructure Controller Enterprise Module Upgrade Guide
1 Available from the APIC-EM controller System Info window.Cisco Network Visibility Application Documentation
For this type of information...
See this document...
Release information, including open and resolved caveats for the Cisco Network Visibility application.
Cisco Network Visibility Application for APIC-EM Release Notes
Supported platforms and software releases.
Cisco Network Visibility Application for APIC-EM Supported Platforms
Installation of the application. (This application is installed as part of the Cisco APIC-EM controller software.)
Cisco Application Policy Infrastructure Controller Enterprise Module Installation Guide
Network discovery, device and host management, topology maps.
Cisco Network Visibility Application for APIC-EM User Guide
Cisco EasyQoS Application Documentation
For this type of information...
See this document...
Release information, including open and resolved caveats for the Cisco EasyQoS application.
Cisco EasyQoS Application for APIC-EM Release Notes
Supported platforms and software releases.
Cisco EasyQoS Application for APIC-EM Supported Platforms
Installation of the application. (This application is installed as part of the Cisco APIC-EM controller software.)
Cisco Application Policy Infrastructure Controller Enterprise Module Installation Guide
Configuration of quality of service policies on the network devices in your network.
Cisco EasyQoS Application for APIC-EM User Guide
Cisco Path Trace Application Documentation
For this type of information...
See this document...
Release information, including open and resolved caveats for the Path Trace application.
Cisco Path Trace Application for APIC-EM Release Notes
Supported platforms and software releases.
Cisco Path Trace Application for APIC-EM Supported Platforms
Installation of the application. (This application is installed as part of the Cisco APIC-EM controller software.)
Cisco Application Policy Infrastructure Controller Enterprise Module Installation Guide
Procedures for performing path traces and information about how to understand the path trace results.
Cisco Path Trace Application for APIC-EM User Guide
Cisco Network Plug and Play Application Documentation
For this type of information...
See this document...
Release information, including open and resolved caveats for the Cisco Plug and Play application.
Supported Cisco devices for Cisco Network Plug and Play.
Release Notes for Cisco Network Plug and Play
Configuration of devices using Cisco Network Plug and Play.
Configuration Guide for Cisco Network Plug and Play on Cisco APIC-EM
Cisco Open Plug-n-Play Agent Configuration Guide
Cisco Network Plug and Play solution overview.
Main workflows used with the Cisco Network Plug and Play solution.
Deployment of the Cisco Network Plug and Play solution.
Tasks for using proxies with the Cisco Network Plug and Play solution.
Configuration of a DHCP server for APIC-EM controller auto-discovery.
Troubleshooting procedures for the Cisco Network Plug and Play solution.
Solution Guide for Cisco Network Plug and Play
Information about using the Cisco Plug and Play Mobile App.
Mobile Application User Guide for Cisco Network Plug and Play (also accessible in the app through Help)
Cisco APIC-EM Developer Documentation
The Cisco APIC-EM developer website is located on the Cisco DevNet website.
For this type of information...
See this document...
API functions, parameters, and responses.
Tutorial introduction to controller GUI, DevNet sandboxes and APIC-EM NB REST API.
Getting Started with Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
Hands-on coding experience calling APIC-EM NB REST API from Python.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at:
http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
Notices
Trademarks
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Copyright © 2017, Cisco Systems, Inc. All rights reserved.