Cisco Network Insights for Resources Application for Cisco DCNM Release Notes, Release 2.1.2
Available Languages
Cisco Network Insights for Resources Application for Cisco DCNM Release Notes, Release 2.1.2
Cisco Network Insights for Resources (NIR) application consist of a pair of monitoring utilities that can be added to the Cisco Data Center Network Manager (DCNM).
This document describes the features, issues, and limitations for Cisco NIR on the Cisco DCNM.
For more information, see Related Content.
| Date |
Description |
| May 7, 2020 |
Compatibility information for Cisco NIR. |
| Apr 8, 2020 |
Compatibility information for Software Telemetry. |
| Mar 27, 2020 |
Compatibility information for Cisco NIR. |
| Mar 16, 2020 |
Added CSCvr98827 to resolved issues. |
| Mar 9, 2020 |
Usage guidelines and limitations. |
| Feb 18, 2020 |
Usage guidelines and limitations. |
| Jan 23, 2020 |
Release 2.1.2 became available. |
Contents
■ Usage Guidelines and Limitations
New Software Features
| Feature |
Description |
| UI enhancements |
The UI enhancements in this release include cross launch navigation, the addition of top nodes in the dashboard, a fabric overview, and viewing of node details. |
| Cisco DCNM |
Support for Cisco DCNM 11.3(1) release. |
| PC or vPC interface types |
Support for PC or vPC interface types in the Interface Statistics tab. |
| BGP Statistics Telemetry |
Support for BGP operational and statistical data in the Protocol Statistics tab. |
| Flow Analytics |
Flow analytics allows to view flows and flow characteristics in each fabric. |
| Flow Telemetry |
Flow telemetry supports Cisco Nexus EX, FX, and FX2 Series switches. |
| Third-party switch support |
Support for third-party (Arista) nodes to collect data. |
Open Issues
| Bug ID |
Description |
Exists In |
| VPC member links are incorrectly shown if 2 VPC switch pairs have same domain ID and port channel. |
2.1.2 |
|
| Flow path may not be able to display all the drops when there is continuous link flaps causing packet loss at more than one node. But the Anomalies section will capture the errors. |
2.1.2 |
|
| Endpoint movement Detected anomaly will not have node and interface details in few cases. |
2.1.2 |
Resolved Issues
| Bug ID |
Description |
Fixed In |
| QoS anomaly is generated for some ports on a spine switch. |
2.1.2 |
|
| Port-channel's tx or rx stats will be 0, but the details page will have member interface utilization. |
2.1.2 |
|
| Longer IPv6 address breaks legend and top nodes. |
2.1.2 |
Hardware Requirements
The Cisco NIR application supports Cisco DCNM 11.3(1) release. It is recommended to use the latest Cisco DCNM release.
Hardware Requirements for Deployments up to 80 Switches and 2000 Flows
| Node |
Deployment Mode |
CPU |
Memory |
Storage |
Network |
| DCNM |
OVA/ISO |
16 vCPUs |
32G |
500G HDD |
3xNIC |
| Computes (x3) |
OVA/ISO |
32 vCPUs |
64G |
500G HDD |
3xNIC |
Hardware Requirements for Deployments from 81 to 250 Switches and 10000 Flows
| Node |
Deployment Mode |
CPU |
Memory |
Storage |
Network |
| DCNM |
OVA/ISO |
16 vCPUs |
32G |
500G HDD |
3xNIC |
| Computes (x3) |
ISO |
40 vCPUs |
256G |
2.4TB HDD |
3xNIC* |
* Network card: Quad-port 10/25G
Compatibility Information
For Cisco NIR on Cisco DCNM compatibility with Day-2 Operations apps, see the Cisco Day-2 Operations Apps Support Matrix.
| Software/Hardware |
Release |
| Minimum Cisco NXOS version required for Software Telemetry |
7.0(3)I7(6), 7.0(3)I7(7) |
| Minimum Cisco NXOS version required for Software and Hardware Telemetry |
9.3(2), 9.3(3) |
| Cisco Device supported for Flow Telemetry |
Cisco Nexus 9300-EX, -FX, and -FX2 platform switches |
| Cisco Device supported for Software Telemetry |
Cisco Cloud Scale ASIC devices |
| Cisco Device not supported for Software Telemetry |
■ Cisco Nexus 9300-GX, 9300-FX3, 9700-GX, and 9700-FX3 platform switches ■ Cisco N3K-C3408-S, N3K-C3432D-S, N3K-C34200YC-SM, N3K-34180YC, and N3K-3464C switches |
| Arista EOS |
4.21 |
| Arista Device Supported |
Arista 7050SX and 7280SR Series switches |
Note: Flow Telemetry data will consume 6MB for 10K IPv4 flows per node.
Note: Flow Telemetry data will consume 12MB for 10K IPv6 flows per node.
Verified Scalability Limits
| Software/Hardware |
Number |
| Number of nodes supported for Hardware and Software Telemetry |
250 |
| Number of flows supported for Hardware Telemetry |
10000 |
Usage Guidelines and Limitations
This section lists the usage guidelines and limitations for Cisco NIR:
■ The Cisco NIR application requires that physical servers hosting Cisco DCNM computes as VMs are atleast Cisco C220-M4 category. It is also required that a compute be hosted on a data store with a dedicated hard disk of atleast 500GB. See Hardware Requirements.
■ If Strict Config Compliance (SCC) is enabled in a fabric, you can not deploy Cisco NIR on Cisco DCNM.
■ Telemetry for hardware TCAM utilization, such as forwarding TCAM and ACL TCAM are not supported on Cisco Nexus C9504, C9508, and C9516 Series platforms.
■ Upgrade from Cisco NIR 2.0.x to Cisco NIR 2.1.1, Cisco NIR 2.1.2 App on Cisco DCNM 11.3(1) is not supported.
■ Upgrade from Cisco NIR 2.1.1 to Cisco NIR 2.1.2 App on Cisco DCNM 11.3(1) is not supported.
Related Content
The Cisco NIR documentation can be accessed from the following website:
https://www.cisco.com/c/en/us/support/data-center-analytics/network-insights-resources/model.html
The documentation includes installation, upgrade, configuration, programming, and troubleshooting guides, technical references, and release notes, as well as other documentation.
| Document |
Description |
| Cisco NIR Application for the Cisco DCNM Release Notes |
This document. |
| Cisco NIR Application for the Cisco DCNM User Guide |
Describes how to download, install, and set up Cisco NIR in Cisco DCNM. |
Documentation Feedback
To provide technical feedback on this document, or to report an error or omission, send your comments to cisconetworkinsights-docfeedback@cisco.com.
Legal Information
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2020 Cisco Systems, Inc. All rights reserved.
Feedback