Cisco Nexus 9000 Series NX-OS Release Notes, Release 10.5(2)F
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
◦
Note: The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.
This document describes the features, issues, and limitations of Cisco NX-OS software Release 10.5(2)F for use on the Cisco Nexus 9000 Series switches.
| Date |
Description |
| November 27, 2024 |
Release 10.5(2)F became available. |
New Software Features
| Product Impact |
Feature |
Description |
| Feature Set |
Multi-Node and Multi-Site Service Chaining |
Beginning with Cisco NX-OS Release 10.5(2)F, ePBR multi-node and multi-site service-chaining is supported with Group Policy Options. ePBR multi-node service-chains and multi-site features are supported with sources and destinations in different VRF contexts. For more information, see Cisco ePBR Configurations Guide, Release 10.5(x). |
| Next-hop resolution using VRF |
Beginning with Cisco NX-OS Release 10.5(2)F, you can specify the VRF for next-hop resolution through policy configuration (such as RPM/ACL), by using the switch(config-route-map)# set vrf <vrf-name> command. For more information, see Cisco Nexus 9000 Series NX-OS Unicast Routing Configuration Guide, Release 10.5(x). |
|
| Support for Layer 3 ePBR policies |
Beginning with Cisco NX-OS Release 10.5(2)F, support for Layer 3 ePBR policies to redirect packets by using the the switch(config-epbr-policy)# pbr set-vrf command is introduced. For more information, see Cisco Nexus 9000 Series NX-OS ePBR Configuration Guide, Release 10.5(x). |
|
| EVPN over RFC5549 Multisite Use Case Support |
Beginning with Cisco NX-OS Release 10.5(2)F, VXLANv4 VTEP over EVPN session between direct connected interface for single-site environments is supported. For more information, see Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 10.5(x). |
|
| Support for Dot1x with Voice VLAN |
Beginning with Cisco NX-OS Release 10.5(2)F, the IEEE 802.1X voice VLAN feature enables multidomain 802.1X authentication on all voice VLAN supported ports, providing authentication to both VoIP phones and PCs connected to them. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| UDP services identification |
Beginning with Cisco NX-OS Release 10.5(2)F, standard and custom UDP ports can be configured to mask the exported flows for Traffic Analytics. For more information, see Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 10.5(x). |
|
| Increase RSA key size to 4096 bits |
Beginning with Cisco NX-OS Release 10.5(2)F, RSA key sizes upto 4096 bits for SSH and upto 3072 and 4096 bits for cryptographic certificates is supported. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| CoPP configuration consistency |
Beginning with Cisco NX-OS Release 10.5(2)F, CoPP consistency checker is introduced to ensure the consistency of all SUP related ACLs across the Software and Hardware layers. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| SNMP AES 256 support |
Beginning with Cisco NX-OS Release 10.5(2)F, support to configure AES-256 as the privacy protocol for SNMPv3 traffic is introduced. For more information see, Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 10.5(x). |
|
| Nexus Dashboard License consumption on NX-OS Switches |
Based on the request for controller licenses from the ND Controller, the corresponding licenses are consumed on the NX-OS switch. The license consumption can be verified using the show commands on the NX-OS switch. See Cisco Nexus 9000 and 3000 Series NX-OS Smart Licensing Using Policy User Guide. |
|
| uRPF support |
Beginning with Cisco NX-OS Release 10.5(2)F, uRPF is supported on Cisco Nexus 9800 Series switches. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| Support for IP unnumbered interfaces |
Beginning with Cisco NX-OS Release 10.5(2)F, IP unnumbered is supported on non-SVI interfaces only. This support is available with N9K-C9808, and N9K-C9804. For more information, see Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 10.5(x). |
|
| Increased Egress NAT translations per port |
Beginning with Cisco NX-OS Release 10.5(2)F, the range for maximum replications for the map interface is increased to 250. This enhanced range is supported on all the platforms that support multicast NAT. For more information see, Cisco Nexus 9000 Series NX-OS Multicast Routing Configuration Guide Release 10.5(x). |
|
| DSVNI with IPv6 Underlay support |
Beginning with Cisco NX-OS Release 10.5(2)F, the VXLAN EVPN with downstream VNI feature is supported on both IPv4 and IPv6 underlay. For more information, see Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 10.5(x). |
|
| QKD MACsec fallback support |
Beginning with Cisco NX-OS Release 10.5(2)F, support for QKD MACsec fallback to PSK is introduced to establish a secured MKA session when the primary PPK fails. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| Mixed-path Enhancement to support vPC for VNF |
Next-hop filtering can be configured to exclude next-hop VNF addresses that are temporarily silent. By excluding such silent next hops, you can prevent routing issues and ensure that traffic is not sent to unresponsive or non-existent destinations. See Cisco Nexus 9000 Series VXLAN Configuration Guide, and Verified Scalability Guide, Release 10.5(x). |
|
| Single drop identification |
Beginning with Cisco NX-OS Release 10.5(2)F, the drop identification feature allows you to identify the nodes causing intermittent packet drop at per flow basis. Using this feature, users can trace packet flow without a sniffer, ethanalyzer, or ELAM. For more information, see Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 10.5(x). |
|
| Granular Flow Priority |
Beginning from Cisco NX-OS Release 10.5(2)F, the IPFM granular priority-based flow feature provides multiple levels of priorities to the IPFM flow and allows to prioritize the critical flows. Priority flow is not supported on PIM passive mode. However, this operation is applicable only when there is lack of bandwidth in the fabric. For more information, see Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 10.5(x). |
|
| Merging Telemetry Subscriptions |
Beginning with Cisco NX-OS 10.5(2)F, support is added to create a single telemetry collection for all the sensor groups even if they are included in multiple subscriptions, unless a parser file is configured in any of its destination groups. For more information, see Cisco Nexus 9000 Series NX-OS Programmability Guide, Release 10.5(x). |
Enhanced Software Features
The enhanced features that are listed below are existing features that are introduced in earlier releases, but enhanced to support new platforms in Cisco NX-OS Release 10.5(2)F.
| Product impact |
Feature |
Description |
| Feature Set |
SVI statistics rate |
Beginning with Cisco NX-OS Release 10.5(2)F, the hardware profile svi-and-si flex-stats-enable command is introduced to view the SVI statistics rate. For more information, see Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 10.5(x). |
| MTS latency threshold |
Beginning with Cisco NX-OS Release 10.5(2)F, this feature allows you to configure MTS latency threshold for a service access point (SAP) or range of SAPs. The threshold value is configured in milliseconds. NX-OS logs the instance when the delay crosses the threshold value. For more information, see Cisco Nexus 9000 Series NX-OS High Availability and Redundancy Guide, Release 10.5(x). |
|
| Third-party applications support |
Support to monitor third-party applications for crash and exit is added. If the application crashes or exits, NX-OS restarts the application. For more information, see Cisco Nexus 9000 Series Programmability Guide, Release 10.5(x). |
|
| DACL support on Cisco Nexus 9300 switches |
Beginning with Cisco NX-OS Release 10.5(2)F, DACL feature supported is extended on Cisco Nexus 9300-FX3, GX, GX2, H2R, and H1 Series switches. For more information, see Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 10.5(x). |
|
| Parameters to maintain Load Balancing |
Beginning with Cisco NX-OS Release 10.5(2)F, the inner IP header fields source, destination IP address and IP protocol is used to maintain load balancing. For more information, see Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 10.5(x). |
|
| Auto Negotiation support |
Beginning with Cisco NX-OS Release 10.5(2)F, auto negotiation feature is supported on the following switches: N9K-C9364D-GX2A, N9K-C9332D-GX2B, N9K-C93560LD-GX2B, N9K-C9348D-GX2A, and N9K-C9408. For more information, see Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 10.5(x). |
New Hardware Features
N9K-X9736C-FX3 Line Card
The N9K-X9736C-FX3 line card is a 36-port 40GE/100GE line card for Cisco Nexus 9504, Nexus 9508, and Nexus 9516 switches.
For details on Cisco Nexus N9K-X9736C-FX line card, see:
● Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
● Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
● Cisco Nexus 9516 NX-OS Mode Switch Hardware Installation Guide
N9K-C92348GC-FX3
The Cisco Nexus C92348GC-FX3 switch (N9K-C92348GC-FX3) is a 1-RU fixed-port, L2/L3 switch, designed for deployment in data centers. This switch has 48x 100M/1G BASE-T downlink ports, 4x 10/25 Gbps SFP28+ uplink ports, 2x 40/100 Gbps QSFP28+ uplink ports, and will deliver 696 Gbps of total bandwidth.
This switch includes these user-replaceable components.
· Fan modules (3) with the following airflow choices.
o Port-side intake airflow with burgundy coloring (NXA-SFAN-30CFM-PI)
o Port-side exhaust airflow with blue coloring (NXA-SFAN-30CFM-PE)
· Power supply modules (two—one for operations and one for redundancy [1+1]) with these choices (a mix of AC and DC power sources is supported. However, do not mix airflow directions):
o 350-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-350W-PI2)
o 350-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-350W-PE2)
o 350-W PHV power supply with port-side intake airflow (burgundy coloring) (NXA-PHV-350W-PI)
o 350-W PHV power supply with port-side exhaust airflow (blue coloring) (NXA-PHV-350W-PE)
o 440-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-440W-PI)
o 440-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-440W-PE)
For details on Cisco Nexus 92348GC-FX3 switch, see the Cisco Nexus 92348GC-FX3-NX-OS Mode Switch Hardware Installation Guide.
Unsupported Features on N9K-C92348GC-FX3
The following features are not supported on N9K-C92348GC-FX3 in Cisco NX-OS Release 10.4(4)M.
· MPLS
· VXLAN
· Analytics
· container-tracker
· Edge Virtual Bridge (evb)
· hardware-telemetry
· macsec
· nbm
· netflow
· ngoam
· nv overlay
· ptp
· security-group
· vmtracker
· vn-segment-vlan-based
· fcoe
· fcoe-npv
Enhanced Hardware Features
Cisco NX-OS Release 10.5(2)F does not include any
new
enhanced hardware features for the Cisco Nexus 9000 Series.
In Cisco NX-OS Release 10.5(2)F, the following three 64-bit images are supported:
● The 64-bit Cisco NX-OS
image filename with “nxos64-cs” as the prefix (for example, nxos64-cs.10.5.2.F.bin) is supported on all Cisco Nexus 9000 series switches except Cisco Nexus 9500 -R and -R2 switches.
● The 64-bit Cisco NX-OS image filename with “nxos64-s1” as the prefix (for example, nxos64-s1.10.5.2.F.bin) is supported and mandatory on all Cisco Nexus 9800 series switches.
● The 64-bit Cisco NX-OS image filename with "nxos64-msll” as the prefix (for example, nxos64-msll.10.5.2.F.bin) is supported on Cisco Nexus 9000 Series -R and -R2 modular switches.
Note: The 32-bit image is no longer supported.
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
| Bug ID |
Headline |
| The throughput displayed by `show policy-map interface ethernet x/y` outputs as "n/a bps" in N9K. |
|
| MGMT connectivity issues for N9K-C9408 PIDs |
|
| Delayed linkup seen with 100G-SR4 on BV ports |
|
| New L3VNID config automatically gets added to the running and startup post upgrade to 10.2 code |
|
| Traffic not forwarded in LACP port-channel with 2 active FEX HIF interfaces |
|
| CSCwk49611 |
Delayed linkup seen with 100G-SR4 on BV ports |
| CSCwm84389 |
New L3VNID config automatically gets added to the running and startup post upgrade to 10.2 code |
| CSCwm98382 |
Traffic not forwarded in LACP port-channel with 2 active FEX HIF interfaces |
| Memory leak in SNMP due to libutils.so |
|
| MPLS Labeled destination traffic dropped on N9k EOR with RX line card |
Resolved Issues
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
| Headline |
|
| Traceback TACACS-3-L3VM_LIBINIT Seen After AAA Failures |
|
| When a long username is used, Cisco Nexus 9000 switch crashes at @security_add_user |
|
| FIB and RIB become inconsistent after EIGRP route switchover |
|
| Error fetching entries from hardware -- forwarding l2 table utilization instance all |
|
| QSFP-100G40G-BIDI higher linkup time issue on 9364C/9332C |
|
| NXOS - RFC5424 timestamp hour is shifted by local zone offset |
|
| Restart SMU install operation will fail " "failed because could not get affected services". |
|
| PTP correction is not working when switching from Low MPD to high MPD with asymmetry. |
|
| NXOS PSU shows shutdown though PSU is working |
|
| Login with "admin" user with incorrect password allowed when "none" aaa authentication is configured |
|
| N9K-C9348GC-FXP - Ingress drops all packets with Bad Preamble tag |
|
| n9k: "DCBX No ACK in 100 PDU" seen after upgrade from 9.3.x to 10.3.4a |
|
| Traffic blackholing caused due to IPv4 host route misprogramming |
|
| svi is taking longer to come up on GIR/vpc domain no shut on primary |
|
| Traffic blackholed after module or chassis reload EOR R linecards with custom MAC config |
|
| N9K - Memory leak in TAHUSD_MTRACK_TYPE_STATS_DMA_HDLR |
|
| SNMP does not show NXA-PAC-350W-PI PSU PID and serial number correctly |
|
| N9K System Controllers, SUP and LCs reloaded after 25 days uptime |
|
| Twamp not working in a server-N9k setup. |
|
| Type 2 route for RMACs with Next hop set to vIP address is not generated for IPv6 Fabric underlay |
|
| Getting an error when trying to enable log-neighbor-changes command |
|
| Removing VLAN on one pair causing other pair to suspend all VLANs on port-channel in pvlan trunk |
|
| Configuring 'udld diable' thru configure-replace it returns an empty patch and nothing configuring |
|
| MMODE config failure with large range of interface configs |
|
| QinQ traffic disrupted afer removing "switchport trunk allow-multi-tag" command |
|
| QinQ traffic disrupted after removing "switchport trunk allow-multi-tag" command |
|
| Critical CVE in component openssh. Upgrade to latest version. |
|
| Pr1f#Permission denied error seen on show interface | json on network-operator other than admin |
|
| Rapid memory leak in security and component(libpython3.8.so.1.0) |
|
| NXOS: port-security mac-address config accepted but not applied |
|
| 10.5(1): N9K-X9400-8D: 4x100g DR4 HBO/SBO, all 4 lanes are not up on LEM reload/power cycle |
|
| private-vlans suspended on vpc primary side after switch bootup |
|
| private-vlans suspended on vpc primary side after switch bootup |
|
| Seeing ipfib core on sanireg05-tor2/N9K-C9332D-GX2B/CF with image pr1f_throttle_COV_10_5_0_15 |
|
| IGMP proxy reports not generated for L2TRM |
|
| When shutting 48 ports simultaneously, N9K rarely sees traffic interrupt (delayed phy port down) |
|
| N9K delay forwarding of IGMP proxy v3 report when "ip igmp snooping v3-report-suppression" enabled |
|
| Continuous Alarms and Warnings on Ports Eth1/49 and Eth1/51 on N9K-C9348GC-FXP |
|
| N9K: DOM for passive QSA showing N/A for Rx Power |
|
| BGP does not pass Tunnel Encapsulation attribute to Cloudsec from the best path in BRIB |
|
| tahusd EDMA stuck seen on N9K-C9364C-GX |
|
| SNMP/libutils.so memory leak |
|
| BrightZR Breakout mode interface delayed linkup time to ~300 seconds |
|
| Nexus SNMP Transceiver Polling causes SNMPD process crash |
|
| Memory Leak on snmpd process |
|
| static igmp/mld snooping not work when flexlink UP/Standby state changed |
|
| GX/GX2 platforms leak ucast PIM register messages to s/w in switching path |
|
| Nexus N9K-X9716D-GX Failed 100G to 400G Conversion |
|
| Parent Missing for OID 1.3.6.1.2.1.47.1.1.1.1.4 in N9K-C93600CD-GX |
|
| N9K: 'show system internal access-list globals' contains unexpected output |
|
| QinQ inner-vlan stripped egress with system dot1q-tunnel transit |
|
| DHCP packet not able to traverse n9k when enabling ip addr dhcp on SVI on same VLAN as DHCP server |
|
| PR2F[39]: TAHUSD crash with "show" commands on BearValley ports |
|
| QDD-2X100-SR4-S - Breakout interfaces lanes shutdown when sibling interfaces are shutdown. |
|
| Unable to remove "fabric forwarding mode anycast-gateway" from a L3VNI |
|
| clean up traces in "show hardware internal tah event-history xcvr <port>" |
|
| During traffic congestion with degraded VPC link, VPC fabric peer could send TCP pkts w/ DSCP 0 |
|
| Running "show logging onboard card-boot-history" and similar commands on FX3 in fex mode crashes FEX |
|
| Unable to install nxapi certificate |
|
| Missprogramming Infra-VLAN is redirecting traffic to CPU on Nexus 9K. |
|
| snmp returns wrong PS model cevPowerSupplyNXAPAC350WPI for NXA-PAC-350W-PI2. |
|
| CPU queue getting stuck causing features/protocols using that queue to fail due to SOD |
|
| SUP Switchover due to urib crash service termination by sysmgr (heartbeat) |
|
| NTP configuration with use-vrf management fails with FQDN |
|
| Twampv6 not working in 10.2(4) release |
|
| After reloading maintenance mode, some config are not display and unconfig interfaces are affected |
|
| In 9k vpc, remove and readd peer-gateway on both sides results in stale sdk-l2 entry |
|
| Add ability to easily verify if a vpc peer's router mac is having G flag on per vlan basis |
|
| PTP out of sync on a breakout interface |
|
| L2 multicast traffic is not forwarded to vPC Fabric peer switch. |
|
| N9K-X9636C-RX: Traffic Punt with default route + uRPF |
|
| Dispute detected with Peer-switch enabled on non-root |
|
| Observing tahusd crash & box reload while running sh tech all or tac-pac |
|
| Nexus responds with timeout instead of "Bad context specified" when SNMP query uses context |
|
| Nexus 9500 mgmt0 interface reverts to 100m after upgrade |
|
| IGMP flooding through TAP interfaces |
|
| EVPN prefix fails to advertise when dup paths with same GWIPs are shared between RR via iBGP |
|
| Host Route learning is failing when vPC peer switch is down for orphan host |
|
| n9k/vpc - VPC MAC table may have out of sync with high mac scale after peer link flap |
|
| ERROR: Activate failed: App config contains options that are allowed only for trusted apps |
|
| Memory Leak in l2fm Process Shared Library libutils.so on Nexus 9k Switches |
|
| n9k: Incorrect static route after NH move between VPC peers in VPC fabric peering |
|
| under router ospf, no redistribute <proto> without route-map is not working |
|
| under ospfv3 address-family ipv6, no redistribute <proto> without route-map is not working |
|
| Netconf-replace failure because of "vpc orphan-port suspend" CLI |
|
| N9K crashes with IPFIB Segmentation Fault when processing iBGP Updates with unreachable NHs |
|
| Nexus 9500 - ethport-channel core with ascii reload |
|
| N9K/OSPF route was not installed in route table |
|
| SNMP trap not generated on MGMT port using IPv6 address |
|
| Proactive IP SLA not able to be configured |
|
| Retimer show commands hog CSUSD main thread, client apps could get killed. |
|
| TCAM exhaustion caused by ACL configuration pushed through NETCONF results in DME sync issues |
|
| N9K: Modification failed for NBM flow policy name with the character '/' |
|
| IPv4 policy route-map (PRM) cannot be removed from SVIs If TCAM reaches high utilization |
|
| Not possible to remove "license smart proxy" from starting-configuration |
|
| Service "port-profile" crashes due to a memory leak |
|
| IPv6 ACL Miss Programmed Blocking ICMP Echo-Reply Type 129 |
|
| %ACLQOS-SLOT1-2-ACLQOS_OOTR: Tcam resource exhausted: DHCP Snoop FHS |
General/Known Issues
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
| Bug ID |
Description |
| DME CC failure for mutiisite virtual rmac |
|
| Loopback Ping is not working after enabling MPLS LDP at Interface |
|
| URIB crashed on urib_chlist_segv_handler after restarting bgp and urib together |
|
| ESG_SGACL: Source of MAC detail is not seen in json output of MAC table |
|
| slight drop in L2 multicast performance in N9K-C9364C-H1 switch |
|
| With NDFC/auto-config, VPC peer-link stays down on disable 'feature tunnel-encryption' |
|
| 'The BGP instance is not in expected state' after quick bgp unconfig / reconfig with 700K ipv4 pfx |
|
| TTL is not decremented for decap L3 VPN traffic on N9800 |
|
| DME inconsistency in sys/mplsta-[eth1/7/1] object after some CLI sequence |
Device Hardware
The following tables list the Cisco Nexus 9000 Series hardware that Cisco NX-OS Release 10.5(1)F supports. For additional information about the supported hardware, see the Hardware Installation Guide for your Cisco Nexus 9000 Series device.
Table 1. Cisco Nexus 9800 Switches
| Product ID |
Description |
| N9K-C9808 |
16-RU modular switch with slots for up to 8 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 3 power trays. |
| N9K-C9804 |
10-RU modular switch with slots for up to 4 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 2 power trays. |
Table 2. Cisco Nexus 9800 Series Line Cards
| Product ID |
Description |
| N9K-X9836DM-A |
Cisco Nexus 9800 36-port 400G QSFP-DD Line Card with MACsec. |
| N9K-X98900CD-A |
Cisco Nexus 9800 14-port 400G QSFP-DD + 34-port 100G QSFP28 Line Card. |
Table 3. Cisco Nexus 9800 Series Fabric Modules
| Product ID |
Description |
| N9K-C9808-FM-A |
Cisco Nexus 9800 Fabric Module for 8-slot Chassis |
| N9K-C9804-FM-A |
Cisco Nexus 9800 Fabric Module for 4-slot Chassis |
Table 4. Cisco Nexus 9800 Supervisor Module
| Product ID |
Description |
| N9K-C9800-SUP-A |
Cisco Nexus 9800 Platform Supervisor Module |
Table 5. Cisco Nexus 9800 Fans and Fan Trays
| Product ID |
Description |
| N9K-C9808-FAN-A |
Cisco Nexus 9800 8-slot chassis fan tray (1st Generation) |
| N9K-C9804-FAN-A |
Cisco Nexus 9800 4-slot chassis fan tray (1st Generation) |
Table 6. Cisco Nexus 9800 Power Supplies
| Product ID |
Description |
| N9K-HV 6.3KW 20A-A |
Cisco Nexus 9800 6,300W 20A AC and HV Power Supply |
Table 7. Cisco Nexus 9500 Switches
| Product ID |
Description |
| N9K-C9504 |
7-RU modular switch with slots for up to 4 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 4 power supplies. |
| N9K-C9508 |
13-RU modular switch with slots for up to 8 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 8 power supplies. |
| N9K-C9516 |
21-RU modular switch with slots for up to 16 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 10 power supplies. |
Table 8. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
Description |
Maximum Quantity |
||||
| Cisco Nexus 9504 |
Cisco Nexus 9508 |
Cisco Nexus 9516 |
||||
| N9K-X9716D-GX |
Cisco Nexus 9500 16-port 400G QSFP-DD Line Card |
4 |
8 |
N/A |
||
| N9K-X9736C-FX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9736C-FX3 |
Cisco Nexus 9500 36-port 40GE/100GE line card |
4 |
8 |
16 |
||
| N9K-X9788TC-FX |
Cisco Nexus 9500 48-port 1/10-G BASE-T Ethernet and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X97160YC-EX |
Cisco Nexus 9500 48-port 10/25-Gigabit Ethernet SFP28 and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9732C-FX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9732C-EX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9736C-EX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
Table 9. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
Description |
Maximum Quantity |
||
| Cisco Nexus 9504 |
Cisco Nexus 9508 |
|||
| N9K-X9636C-R |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
| N9K-X9636C-RX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
| N9K-X9636Q-R |
Cisco Nexus 9500 36-port 40-Gigabit Ethernet QSFP Line Card |
4 |
8 |
|
| N9K-X96136YC-R |
Cisco Nexus 9500 16-port 1/10 Gigabit, 32-port 10/25 Gigabit, and 4-port 40/100 Gigabit Ethernet Line Card |
4 |
8 |
|
| N9K-X9624D-R2 |
Cisco Nexus 9500 24-port 400-Gigabit QDD Line Card |
Not supported |
8 |
|
Table 10. Cisco Nexus 9500 Cloud Scale Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-E |
Cisco Nexus 9504 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9504-FM-G |
Cisco Nexus 9500 4-slot 1.6Tbps cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E2 |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-G |
Cisco Nexus 9500 8-slot 1.6Tbps cloud-scale fabric module |
4 |
5 |
| N9K-C9516-FM-E2 |
Cisco Nexus 9516 100-Gigabit cloud scale fabric module |
4 |
5 |
Table 11. Cisco Nexus 9500 R-Series Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-R |
Cisco Nexus 9504 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R |
Cisco Nexus 9508 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R2 |
Cisco Nexus 9508 400-Gigabit R-Series fabric module |
4 |
6 |
Table 12. Cisco Nexus 9500 Supervisor Modules
| Supervisor |
Description |
Maximum |
| N9K-SUP-A |
1.8-GHz supervisor module with 4 cores, 4 threads, and 16 GB of memory |
2 |
| N9K-SUP-A+ |
1.8-GHz supervisor module with 4 cores, 8 threads, and 16 GB of memory |
2 |
| N9K-SUP-B |
2.2-GHz supervisor module with 6 cores, 12 threads, and 24 GB of memory |
2 |
| N9K-SUP-B+ |
1.9-GHz supervisor module with 6 cores, 12 threads, and 32 GB of memory |
2 |
Note: N9K-SUP-A and N9K-SUP-A+ are not supported on Cisco Nexus 9504 and 9508 switches with -R and -R2 Line Cards.
Table 13. Cisco Nexus 9500 System Controller
| Product ID |
Description |
Quantity |
| N9K-SC-A |
Cisco Nexus 9500 Platform System Controller Module |
2 |
Table 14. Cisco Nexus 9500 Fans and Fan Trays
| Product ID |
Description |
Quantity |
| N9K-C9504-FAN |
Fan tray for 4-slot modular chassis |
3 |
| N9K-C9504-FAN2 |
Fan tray that supports the Cisco N9K-C9504-FM-G fabric module |
3 |
| N9K-C9508-FAN |
Fan tray for 8-slot modular chassis |
3 |
| N9K-C9508-FAN2 |
Fan tray that supports the Cisco N9K-C9508-FM-G fabric module |
3 |
| N9K-C9516-FAN |
Fan tray for 16-slot modular chassis |
3 |
Table 15. Cisco Nexus 9500 Fabric Module Blanks with Power Connector
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
| N9K-C9508-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
Table 16. Cisco Nexus 9500 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| N9K-PAC-3000W-B |
3-KW AC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PDC-3000W-B |
3-KW DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV-3000W-B |
3-KW Universal AC/DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV2-3000W-B |
3.15-KW Dual Input Universal AC/DC Power Supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
Table 17. Cisco Nexus 9400 Switches
| Product ID |
Description |
| N9K-C9408 |
4-RU, 8-slot centralized modular chassis switch, which is configurable with up to 128 200-Gigabit QSFP56 (256 100 Gigabit by breakout) ports or 64 400-Gigabit ports. |
| N9K-C9400-SUP-A |
Cisco Nexus 9400 Supervisor Card |
| N9K-C9400-SW-GX2A |
Cisco Nexus 9400 25.6Tbps Switch Card |
| N9K-X9400-8D |
Cisco Nexus 9400 8p 400G QSFP-DD LEM |
| N9K-X9400-16W |
Cisco Nexus 9400 16p 200G QSFP56 LEM |
| N9K-X9400-22L |
Cisco Nexus 9400 LEM with 22 10G/25G/50G ports. |
Table 18. Cisco Nexus 9200 and 9300 Switches
| Cisco Nexus Switch |
Description |
| N9K-C92348GC-X |
The Cisco Nexus 92348GC-X switch (N9K-C92348GC-X) is a 1-RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 1GBASE-T downlink ports on the 92348GC-X can be configured to work as 100 Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the two-ports of QSFP28 can be configured as 40- and 100-Gbps ports. The Cisco Nexus 92348GC-X is ideal for Big Data customers that require a Gigabit Ethernet ToR switch with local switching. |
| N9K-C93400LD-H1 |
1-RU fixed-port, L2/L3 switch with 48 50G SFP56 ports and 4 400G QSFP-DD uplink ports. |
| N9K-C93108TC-FX3 |
1 RU fixed-port switch Forty-eight 100M/1G/10GBASE-T ports (ports 1–48), Six 40/100-Gigabit ports QSFP28 (ports 49–54), Two management ports (one 10/100/1000BASE-T port and one SFP port), One console port (RS-232), and one USB port. |
| N9K-C9332D-H2R |
1-RU fixed-port switch with 400-Gigabit QSFP-DD ports (32), 10-Gigabit SFP+ ports (2), Management ports (one 10/100/1000BASE-T port and one SFP port), console port (RS-232), and USB port. |
| N9K-C9348GC-FX3 |
1 RU fixed-port switch 48 10/100/1000M copper RJ-45 downlink ports, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
| N9K-C9348GC-FX3PH |
1-RU fixed-port switch 40 10M/100M/1G copper RJ-45 downlink ports that support PoE/PoE+/PoE++ and 8 10M/100M copper RJ-45 downlink ports that support PoE/PoE+/PoE++, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
| N9K-C93180YC-FX3H |
1-RU fixed-port switch with 24 100M/1/10/25-Gigabit Ethernet SFP28 ports (ports 1–24), 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54), One management port (one 10/100/1000BASE-T port), and One console port (RS-232) |
| N9K-C9316D-GX |
1-RU switch with 16x400/100/40-Gbps ports. |
| N9K-C9364C-GX |
2-RU fixed-port switch with 64 100-Gigabit SFP28 ports. |
| N9K-C93600CD-GX |
1-RU fixed-port switch with 28 10/40/100-Gigabit QSFP28 ports (ports 1–28), 8 10/40/100/400-Gigabit QSFP-DD ports (ports 29–36) |
| N9K-C9364C |
2-RU Top-of-Rack switch with 64 40-/100-Gigabit QSFP28 ports and 2 1-/10-Gigabit SFP+ ports.
● Ports 1 to 64 support 40/100-Gigabit speeds.
● Ports 49–64 support MACsec encryption.
● Ports 651–64and66 support 1/10 Gigabit speeds.
|
| N9K-C9364C-H1 |
2-RU fixed-port switch with 64 100G SFP28 ports. |
| N9K-C9332C |
1-RU fixed switch with 32 40/100-Gigabit QSFP28 ports and 2 fixed 1/10-Gigabit SFP+ ports. |
| N9K-C9332D-GX2B |
1-Rack-unit (1-RU) spine switch with 32p 400/100-Gbps QSFP-DD ports and 2p 1/10 SFP+ ports. |
| N9K-C9348D-GX2A |
48p 40/100/400-Gigabit QSFP-DD ports and 2p 1/10G/10G SFP+ ports |
| N9K-C9364D-GX2A |
64p 400/100-Gigabit QSFP-DD ports and 2p 1/10 SFP+ ports |
| N9K-C93180YC-FX3 |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
| N9K-C93180YC-FX3S |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
| N9K-C9336C-FX2-E |
1-RU switch with 36 40-/100-Gb QSFP28 ports |
| N9K-C9336C-FX2 |
1-RU switch with 36 40-/100-Gb Ethernet QSFP28 ports |
| N9K-C93360YC-FX2 |
2-RU switch with 96 10-/25-Gigabit SFP28 ports and 12 40/100-Gigabit QSFP28 ports |
| N9K-C93240YC-FX2 |
1.2-RU Top-of-Rack switch with 48 10-/25-Gigabit SFP28 fiber ports and 12 40-/100-Gigabit Ethernet QSFP28 ports. |
| N9K-C93216TC-FX2 |
2-RU switch with 96 100M/1G/10G RJ-45 ports, 12 40/100-Gigabit QSFP28 ports, 2 management ports (one RJ-45 and one SFP port), 1 console port, and 1 USB port. |
| N9K-C93180YC-FX |
1-RU Top-of-Rack switch with 10-/25-/32-Gigabit Ethernet/FC ports and 6 40-/100-Gigabit QSFP28 ports. You can configure the 48 ports as 1/10/25-Gigabit Ethernet ports or as FCoE ports or as 8-/16-/32-Gigabit Fibre Channel ports. |
| N9K-C93180YC-FX-24 |
1 RU 24 1/10/25-Gigabit Ethernet SFP28 front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. The SFP28 ports support 1-, 10-, and 25-Gigabit Ethernet connections and 8-, 16-, and 32-Gigabit Fibre Channel connections. |
| N9K-C93108TC-FX |
1-RU Top-of-Rack switch with 48 100M/1/10GBASE-T (copper) ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C93108TC-FX-24 |
1 RU 24 1/10GBASE-T (copper) front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. |
| N9K-C93108TC-FX3P |
1-RU fixed-port switch with 48 100M/1/2.5/5/10GBASE-T ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C9348GC-FXP[1] |
Cisco Nexus 9300 with 48p 100M/1 G, 4p 10/25 G SFP+ and 2p 100 G QSFP |
Table 19. Cisco Nexus 9200 and 9300 Fans and Fan Trays
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3 |
| NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3 |
| NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3PH |
| NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3PH |
| NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6
5
4 |
9332D-H2R
93400LD-H1
93108TC-FX3 |
| NXA-SFAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
6
5
4 |
9332D-GX2B
93400LD-H1
93108TC-FX3 |
| NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6 |
9332D-GX2B |
| NXA-FAN-160CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9364C [[2]] |
| NXA-FAN-160CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9364C [1] 93360YC-FX2 |
| NXA-FAN-160CFM2-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4 |
9364C-GX |
| NXA-FAN-160CFM2-PI |
Fan module with port-side intake airflow (burgundy coloring) |
4 |
9364C-GX |
| NXA-FAN-30CFM-B |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
|
| NXA-FAN-30CFM-F |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4
6 |
92300YC [1] 9336C-FX2-E
|
| NXA-FAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring)
Fan module with port-side exhaust airflow (blue coloring) |
4
6
6 |
92300YC [1] 9316D-GX
9336C-FX2-E |
| NXA-FAN-65CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-65CFM-PI |
Fan module with port-side exhaust airflow (burgundy coloring) |
3 |
93240YC-FX2 |
Table 20. Cisco Nexus 9200 and 9300 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-PDC-715W-PI |
715-W DC power supply with port-side intake airflow (blue coloring) |
2 |
93108TC-FX3P |
| NXA-PDC-440W-PE |
440-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PDC-440W-PI |
440-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PHV-350W-PE |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PHV-350W-PI |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-350W-PE2 |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PAC-350W-PI2 |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-1900W-PE |
1900-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-1900W-PI |
1900-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PHV-2KW-PI |
2000-W HVDC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-H2R 93400LD-H1 |
| NXA-PAC-1500W-PE |
1500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9332D-GX2B |
| NXA-PAC-1500W-PI |
1500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-GX2B |
| NXA-PAC-500W-PE |
500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93180YC-FX |
| NXA-PAC-500W-PI |
500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93180YC-FX |
| NXA-PAC-650W-PE |
650-W AC power supply with port-side exhaust (blue coloring) |
2 |
92300YC 93180YC-FX3H |
| NXA-PAC-650W-PI |
650-W AC power supply with port-side intake (burgundy coloring) |
2 |
92300YC 93180YC-FX3H |
| NXA-PAC-750W-PE |
750-W AC power supply with port-side exhaust airflow (blue coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-750W-PI |
750-W AC power supply with port-side intake airflow (burgundy coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-1100W-PE2 |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI2 |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI |
Cisco Nexus 9000 PoE 1100W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1100W-PE |
Cisco Nexus 9000 PoE 1100W AC PS, port-side exhaust |
2 |
93108TC-FX3P |
| NXA-PAC-1900W-PI |
Cisco Nexus 9000 PoE 1900W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1200W-PE |
1200-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
| NXA-PAC-1200W-PI |
1200-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
| NXA-PAC-1400W-PE |
1400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93400LD-H1 |
| NXA-PAC-1400W-PI |
1400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93400LD-H1 |
| N9K-PUV-1200W |
1200-W Universal AC/DC power supply with bidirectional airflow (white coloring) |
2 |
92300YC |
| NXA-PDC-930W-PE |
930-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
| NXA-PDC-930W-PI |
930-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
| NXA-PDC-1100W-PE |
1100-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PDC-1100W-PI |
1100-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PHV-1100W-PE |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PHV-1100W-PI |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-2KW-PE |
2000-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9364C-GX
|
| NXA-PAC-2KW-PI |
2000-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX |
| NXA-PDC-2KW-PE |
2000-W DC power supply with port-side exhaust airflow (blue coloring |
2 |
9364C-GX 93400LD-H1 |
| NXA-PDC-2KW-PI |
2000-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX 9332D-H2R 93400LD-H1 |
| N2200-PAC-400W |
400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
| N2200-PAC-400W-B |
400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
92348GC-X |
| N2200-PDC-350W-B |
350-W DC power supply with port-side intake airflow |
2 |
92348GC-X |
| N2200-PDC-400W |
400-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
Fabric Module and Line Card compatibility details are listed below:
Table 21. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
N9K-C9504-FM-G |
N9K-C9508-FM-G |
N9K-C9504-FM-E |
N9K-C9508-FM-E |
N9K-C9508-FM-E2 |
N9K-C9516-FM-E2 |
| N9K-X9716D-GX |
4 |
4 |
No |
No |
No |
No |
| N9K-X9736C-FX |
5 |
5 |
5 |
5 |
5 |
5 |
| N9K-X97160YC-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9788TC-FX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-FX |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
Table 22. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
N9K-C9504-FM-R |
N9K-C9508-FM-R |
| N9K-X9636C-RX |
6 |
6 |
| N9K-X9636Q-R |
4 6 (n+2 redundancy) |
4 6 (n+2 redundancy) |
| N9K-X9636C-R |
5 6 (n+1 redundancy) |
5 6 (n+1 redundancy) |
| N9K-X96136YC-R |
6 |
6 |
Table 23. Cisco Nexus 9500 R2-Series Line Cards
| Product ID |
N9K-C9508-FM-R2 |
| N9K-X9624D-R2 |
6 |
For information about transceivers and cables supported on a switch, see the Transceiver Module (TMG) Compatibility Matrix. For the transceiver specifications and installation information, see the Install and Upgrade Guides.
Cisco Nexus Dashboard Insights for Data Center
Cisco NX-OS Release 10.5(1)F supports the Cisco Nexus Dashboard Insights on Cisco Nexus 9300-FX, 9300-FX2, 9300-FX3, 9300-GX, 9300-GX2, 9400, and 9800 platform switches and 9500 platform switches with -EX/FX/GX Line Cards. See the Cisco Nexus Insights documentation.
To perform a software upgrade or downgrade, follow the instructions in the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.5(x). For information about an In Service Software Upgrade (ISSU), see the Cisco NX-OS ISSU Support Matrix.
| Document Title |
Description |
| Cisco Nexus 9000 Series Switches documentation |
|
| Cisco NX-OS Software Release and Image-naming Convention |
|
| Cisco Nexus 3000 and 9000 Series NXAPI REST SDK User Guide and API Reference |
Cisco Nexus 3000 and 9000 Series NX-NX-API REST SDK User Guide and API Reference |
| Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator |
Licensing Information When you downgrade from Cisco NX-OS Release 10.5(2)F to an earlier release, the features that use the ACI+NX-OS Essentials, Advantage, and add-on licenses or the Hardware Streaming Telemetry license continue to work in honor mode in the downgraded version. In addition, the output of the show license usage command continues to include entries for these unsupported licenses. |
| Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide |
Cisco Nexus 9000 Series Software Upgrade and Downgrade Guide, Release 10.5(x) |
| Cisco Nexus 9000 Series FPGA/EPLD Upgrade Release Notes, Release 10.5(2)F |
|
| Cisco NX-OS Supported MIBs |
|
| Supported FEX modules |
|
| Cisco Nexus 9000 Series Hardware Installation Guides |
To provide technical feedback on this document, or to report an error or omission, please send your comments to nexus9k-docfeedback@cisco.com. We appreciate your feedback.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2024 Cisco Systems, Inc. All rights reserved.