|
Command or Action |
Purpose |
Step 1 |
enable
Example: Router> enable |
Enables privileged EXEC mode.
- Enter your password if prompted.
|
Step 2 |
configure terminal
Example: Router# configure terminal |
Enters global configuration mode. |
Step 3 |
ip sla operation-number
Example: Router(config)# ip sla 10 |
Begins configuration for an IP SLAs operation and enters IP SLA configuration mode. |
Step 4 |
dhcp {destination-ip-address | destination-hostname} [source-ip {ip-address | hostname}] [option-82 [circuit-id circuit-id] [remote-id remote-id] [subnet-mask subnet-mask]]
Example: Router(config-ip-sla)# dhcp 10.10.10.3 option-82 circuit-id 10005A6F1234 |
Defines a DHCP operation and enters IP SLA DHCP configuration mode. |
Step 5 |
history buckets-kept size
Example: Router(config-ip-sla-dhcp)# history buckets-kept 25 |
(Optional) Sets the number of history buckets that are kept during the lifetime of an IP SLAs operation. |
Step 6 |
history distributions-of-statistics-kept size
Example: Router(config-ip-sla-dhcp)# history distributions-of-statistics-kept 5 |
(Optional) Sets the number of statistics distributions kept per hop during an IP SLAs operation. |
Step 7 |
history enhanced [interval seconds] [buckets number-of-buckets]
Example: Router(config-ip-sla-dhcp)# history enhanced interval 900 buckets 100 |
(Optional) Enables enhanced history gathering for an IP SLAs operation. |
Step 8 |
history filter {none | all | overThreshold | failures}
Example: Router(config-ip-sla-dhcp)# history filter failures |
(Optional) Defines the type of information kept in the history table for an IP SLAs operation. |
Step 9 |
frequency seconds
Example: Router(config-ip-sla-dhcp)# frequency 30 |
(Optional) Sets the rate at which a specified IP SLAs operation repeats. |
Step 10 |
history hours-of-statistics-kept hours
Example: Router(config-ip-sla-dhcp)# history hours-of-statistics-kept 4 |
(Optional) Sets the number of hours for which statistics are maintained for an IP SLAs operation. |
Step 11 |
history lives-kept lives
Example: Router(config-ip-sla-dhcp)# history lives-kept 5 |
(Optional) Sets the number of lives maintained in the history table for an IP SLAs operation. |
Step 12 |
owner owner-id
Example: Router(config-ip-sla-dhcp)# owner admin |
(Optional) Configures the Simple Network Management Protocol (SNMP) owner of an IP SLAs operation. |
Step 13 |
history statistics-distribution-interval milliseconds
Example: Router(config-ip-sla-dhcp)# history statistics-distribution-interval 10 |
(Optional) Sets the time interval for each statistics distribution kept for an IP SLAs operation. |
Step 14 |
tag text
Example: Router(config-ip-sla-dhcp)# tag TelnetPollServer1 |
(Optional) Creates a user-specified identifier for an IP SLAs operation. |
Step 15 |
threshold milliseconds
Example: Router(config-ip-sla-dhcp)# threshold 10000 |
(Optional) Sets the upper threshold value for calculating network monitoring statistics created by an IP SLAs operation. |
Step 16 |
timeout milliseconds
Example: Router(config-ip-sla-dhcp)# timeout 10000 |
(Optional) Sets the amount of time an IP SLAs operation waits for a response from its request packet. |
Step 17 |
end
Example: Router(config-ip-sla-dhcp)# end |
Exits to privileged EXEC mode. |