Intelligent Wireless Gateway Configuration Guide, Cisco IOS Release 3S

The Cisco software feature documentation in this configuration guide often includes information about features that are shared across software releases and platforms. This guide may contain information that is not specific to your particular platform or is not supported in your software release. Additionally, some configuration guides contain content that may be superseded by documentation from a later software release.

For the latest feature information and caveats, see the release notes for your platform and software release. Additionally, use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Recommended Reading:

• About Cisco IOS Software Documentation
• Using the Command-Line Interface in Cisco IOS Software

Related Documentation:

• Cisco IOS Master Command List, All Releases
• Cisco Product Selection web page (for navigating to related release-specific documentation).