FHRP - Object Tracking List

Table Of Contents

FHRP - Object Tracking List

FHRP - Object Tracking List

---

The FHRP - Object Tracking List feature enhances the tracking capabilities to enable the configuration of a combination of tracked objects in a list and a flexible method of combining objects using Boolean logic.

Configuration Information

Configuration information is included in the "Configuring Enhanced Object Tracking" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/taipbtrk.htm

The following sections provide information about this feature:

•Configuring a Tracked List and Boolean Expression

•Configuring a Tracked List and Threshold Weight

•Configuring a Tracked List and Threshold Percentage

•Configuring the Track List Defaults

For a complete list of features included in the "Configuring Enhanced Object Tracking" module, see the Feature Information Table located toward the end of the module.

Command Reference Information

Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SB, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbiap_r/index.htm

New or Modified Commands

The following commands are new or modified for this feature:

•show track

•threshold percentage

•threshold weight

•track list

•track resolution

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.