RADIUS Attribute 82: Tunnel Assignment ID

Available Languages

Download Options

  • PDF     (134.2 KB)
    View with Adobe Reader on a variety of devices
Updated:March 22, 2006

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Radius Attribute 82: Tunnel Assignment ID

Table Of Contents

Radius Attribute 82: Tunnel Assignment ID


Radius Attribute 82: Tunnel Assignment ID

The Radius Attribute 82: Tunnel Assignment ID feature allows the Layer 2 Tunnel Protocol (L2TP) network access server (NAS) to group users from different per-user or domain RADIUS profiles into the same active tunnel if the tunnel endpoints, tunnel type, and Tunnel-Assignment-ID are identical.

Configuration Information

Configuration information is included in the "Configuring AAA for VPDNs" module in the Cisco IOS VPDN Configuration Guide, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tvpdn_c/vpc2auht.htm

Command Reference

No commands were modified by this feature.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products