Table Of Contents
Suppress BGP Advertisements for Inactive Routes
Suppress BGP Advertisements for Inactive Routes
The Suppress BGP Advertisements for Inactive Routes features allows you to configure the suppression of advertisements for routes that are not installed in the Routing Information Base (RIB). Configuring this feature allows Border Gateway Protocol (BGP) updates to be more consistent with data used for traffic forwarding.
Configuration Information
Configuration information is included in the "Configuring a Basic BGP Network" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tbgp_c/t_brbbas.htm
The following sections provide information about this feature:
•BGP Route Aggregation
•Aggregating Route Prefixes Using BGP
•Suppressing Inactive Route Advertisement Using BGP
•Aggregating Prefixes Using BGP: Examples
For a complete list of features included in the "Configuring a Basic BGP Network" module, see the Feature Information table located toward the end of the module.
Command Reference Information
Release 12.2SR
The following commands are new or modified for this feature:
•bgp suppress-inactive
Detailed information about these commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/cr/sripr_r/index.htm
Release 12.2SX
The following commands are new or modified for this feature:
•bgp suppress-inactive
Command reference information is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SX, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxipr_r/index.htm
Master Commands Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
Release 12.2SR
Cisco IOS Master Commands List, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/122srmdx/122sridx.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006, 2007 Cisco Systems, Inc. All rights reserved.