DHCP Features in Cisco IOS Release 12.2(33)SRB

Table Of Contents

DHCP Features in Cisco IOS Release 12.2(33)SRB

DHCP Features in Cisco IOS Release 12.2(33)SRB

---

Many Dynamic Host Configuration Protocol (DHCP) features are now integrated into Cisco IOS Release 12.2(33)SRB. See the "DHCP Features Roadmap" for information about which release trains support DHCP features.

Configuration Information

Configuration information is included in the Cisco IOS IP Addressing Services Configuration Guide, Release 12.4T, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiad_c/dhcp/index.htm

Command Reference Information

Command reference information is included in the "DHCP Commands" chapter of the Cisco IOS IP Addressing Services Command Reference, Release 12.2SR, at the following URL:

•http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/cr/sriad_r/index.htm

See the command history table on each command reference page to determine if a command is supported on Cisco IOS Release 12.2(33)SRB.

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.