BGP Multicast Inter-AS VPN

Available Languages

Download Options

  • PDF     (95.3 KB)
    View with Adobe Reader on a variety of devices
Updated:July 8, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

BGP Multicast Inter-AS VPN

Table Of Contents

BGP Multicast Inter-AS VPN

Configuration Information

Command Reference Information


BGP Multicast Inter-AS VPN

The BGP Multicast Inter-AS VPN feature introduces the IPv4 MDT SAFI in BGP. The MDT SAFI is a transitive multicast capable connector attribute that is defined as an IPv4 address family in BGP. The MDT SAFI is designed to support inter-AS VPN peering sessions.

Configuration Information

Configuration information is included in the "Configuring Multicast VPN Inter-AS Support" module in Cisco IOS Release 12.0(30)S at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s30/iasmcvpn.htm

The following sections provide information about this feature:

•MVPN Inter-AS Support Solution for Options B and C

•BGP Connector Attribute

•BGP MDT SAFI Updates for MVPN Inter-AS Support

•Configuring the MDT Address Family in BGP for Multicast VPN Inter-AS Support

•Displaying Information about IPv4 MDT Sessions in BGP

•Clearing IPv4 MDT Peering Sessions in BGP

•Configuring an IPv4 MDT Address-Family Session for Multicast VPN Inter-AS Support: Example

For a complete list of features included in the "Configuring Multicast VPN Inter-AS Support" module, see the Feature Information table located toward the end of the module.

Command Reference Information

Release 12.2SX

The following commands are new or modified for this feature:

•address-family ipv4 (BGP)

•clear bgp ipv4 mdt

•show ip bgp ipv4

Detailed information about these commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SX, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxipr_r/index.htm


Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco