FHRPEnhanced Object Tracking of IP SLAs

Available Languages

Download Options

PDF (70.3 KB)
View with Adobe Reader on a variety of devices

Updated:August 21, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

FHRP—Enhanced Object Tracking of IP SLAs

Table Of Contents

FHRP—Enhanced Object Tracking of IP SLAs

FHRP—Enhanced Object Tracking of IP SLAs

The FHRP—Enhanced Object Tracking of IP SLAs feature enables First Hop Redundancy Protocols (FHRPs) and other Enhanced Object Tracking (EOT) clients to track the output from IP SLAs objects and use the provided information to trigger an action.

•FHRP—Enhanced Object Tracking of IP SLAs Operations

•Tracking IP SLAs Operations

Configuration Information

Configuration information is included in the "Configuring Enhanced Object Tracking" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/index.htm

The following sections provide information about this feature:

•FHRP—Enhanced Object Tracking of IP SLAs Operations

•Tracking IP SLAs Operations

For a complete list of features included in the "Configuring Enhanced Object Tracking" module, see the Feature Information Table located toward the end of the module.

Command Reference Information

Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SX, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sx/cr/sxiap_r/index.htm

New or Modified Commands

The following command was introduced by this feature:

•track rtr

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.