NetFlow MIB and Top Talkers

Table Of Contents

NetFlow MIB and Top Talkers

Configuration Information

Command Reference Information

Master Command's Lists

NetFlow MIB and Top Talkers

---

The NetFlow MIB and Top Talkers feature uses NetFlow functionality to obtain information regarding heaviest traffic patterns and most-used applications (top talkers) in the network. The NetFlow MIB component of the NetFlow MIB and Top Talkers feature enables you to configure top talkers and view the top talker statistics using SNMP.

Configuration Information

Configuration information is included in the "Configuring NetFlow Top Talkers using Cisco IOS CLI Commands or SNMP Commands" module of the Cisco IOS NetFlow Configuration Guide, Release 12.4, at the following URL:

http://www.cisco.com/en/US/docs/ios-xml/ios/netflow/configuration/12-4/cfg-nflow-top-talk.html

The following sections provide information about this feature:

•Information About Configuring NetFlow Top Talkers Using Cisco IOS CLI Commands or SNMP Commands

•How to Configure NetFlow Top Talkers Using Cisco IOS CLI Commands or SNMP Commands

For a complete list of features included in the "Configuring NetFlow Top Talkers Using Cisco IOS CLI Commands or SNMP Commands" module, see the Feature Information Table located toward the end of the module.

Command Reference Information

Release 12.4

The following commands are new or modified for this feature:

•cache-timeout

•ip flow-top-talkers

•match

•show ip flow top-talkers

•sort-by

•top

Detailed information about these commands is included in the Cisco IOS NetFlow Command Reference, Release 12.4, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnf_r/index.htm

Master Command's Lists

Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.

Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.

Release 12.4T

Cisco IOS Master Commands List is available at the following URL:

http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_book.html

Cisco IOS New, Modified, Removed, and Replaced Commands List, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124mindx/124htnml.htm

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.