Release Notes for Cisco IAD2801 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XZ
Available Languages
Table Of Contents
Release Notes for Cisco IAD2801 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XZ
Determining the Software Release
Upgrading to a New Software Release
New Hardware Features in Cisco IOS Release 12.4(15)XZ2
New Software Features in Cisco IOS Release 12.4(15)XZ2
New Hardware Features in Cisco IOS Release 12.4(15)XZ1
New Software Features in Cisco IOS Release 12.4(15)XZ1
New Hardware Features in Cisco IOS Release 12.4(15)XZ
New Software Features in Cisco IOS Release 12.4(15)XZ
SIP Video Support for Telepresence Calls
Configurable SIP Listening Port
Gatekeeper Enhancement: Support for extended InterZone Clear Token
Configurable SIP Parameter Modification
Configurable Bandwidth Parameters for SIP Calls
SIP - Ability to Send a SIP Registration Message on a Border Element
SIP Delayed Offer to Early Offer for Video Calls
SIP - Support for SIP Video Calls with Flow Around Media
SIP - Support for SESSION REFRESH with reINVITEs
Fixed Configuration Platforms Supporting Specific Cards
Open Caveats - Release 12.4(15)XZ2
Resolved Caveats - Release 12.4(15)XZ2
Open Caveats - Release 12.4(15)XZ1
Resolved Caveats - Release 12.4(15)XZ1
Open Caveats - Cisco IOS Release 12.4(15)XZ
Resolved Caveats - Cisco IOS Release 12.4(15)XZ
Cisco IOS Software Documentation Set
Release Notes for Cisco IAD2801 Series Integrated Access Devices with Cisco IOS Release 12.4(15)XZ
First Released: April 14, 2008Last Revised: March 25, 2009Cisco IOS Release 12.4(15)XZ2OL-16639-02 Second Release
These release notes for the Cisco IAD2801 Series Integrated Access Devices describe the product-related enhancements provided in the Cisco IOS Release 12.4(15)XZ. These release notes are updated as needed.
For a list of the applicable software caveats, see the "Caveats" section. See also Caveats for Cisco IOS Release 12.4(15)T, which is updated for every maintenance release.
Use these release notes with the Cross-Platform Release Notes for Cisco IOS Release 12.4T and About Cisco IOS Release Notes.
Contents
These release notes describe the following topics:
Introduction
The following Cisco IAD2801 models are supported:
•
IAD2801-2BRI-A/K9- Fixed configuration router, with integrated PVDM2-8, HWIC-1ADSL, and 1 VIC2-2BRI-NT/TE-P, 2 Fast Ethernet connections, and 1 factory configurable HWIC slot
•
•
The following cards are supported in the factory configurable HWIC slot on all models:
•
•
•
For information on new features and Cisco IOS commands supported by Cisco IOS Release 12.4(15)XZ, see the "New and Changed Information" section.
System Requirements
This section describes the system requirements for the Cisco IOS Release 12.4(15)XZ releases and includes the following sections:
•
•
Memory Requirements
Table 1 lists the memory requirements for the Cisco IOS feature sets on the Cisco IAD2801 in Cisco IOS Release 12.4(15)XZ. The Cisco IAD2801 uses a 32-MB Flash memory card.
Hardware Supported
Cisco IOS Release 12.4(15)XZ supports the Cisco IAD2801 series IADS.
For detailed descriptions of the new hardware features, see the "New and Changed Information" section.
For information about supported hardware for this platform and release, see the Hardware/Software Compatibility Matrix at http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
Determining the Software Release
To determine the version of Cisco IOS software currently running on your Cisco IAD2801 series router, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
Upgrading to a New Software Release
For general information about upgrading to a new software release, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
Feature Set Tables
For information about Feature Set Tables, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
New and Changed Information
The following sections list the new hardware products and software features supported by the Cisco IAD2801 in Cisco IOS Release 12.4(15)XY:
•
•
•
•
•
•
New Hardware Features in Cisco IOS Release 12.4(15)XZ2
There are no new hardware features in this release.
New Software Features in Cisco IOS Release 12.4(15)XZ2
There are no new software features in this release.
New Hardware Features in Cisco IOS Release 12.4(15)XZ1
There are no new hardware features in this release.
New Software Features in Cisco IOS Release 12.4(15)XZ1
There are no new software features in this release.
New Hardware Features in Cisco IOS Release 12.4(15)XZ
There are no new hardware features in this release.
New Software Features in Cisco IOS Release 12.4(15)XZ
The new software features are:
•
•
•
•
•
•
•
•
•
SIP Video Support for Telepresence Calls
This feature allows the Cisco Unified Border Element to generate SIP INVITES that include SDP lines for both voice and voice media paths. This allows the Border Element to provide back-to-back user agent functionality for both voice and video calls. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
Configurable SIP Listening Port
This features provides users the ability to configure the port where SIP messages are listened to.
For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
Gatekeeper Enhancement: Support for extended InterZone Clear Token
Provides additional security to the gatekeeper by ensuring that ARQ and RRQ are not spoofed. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cubegk/configuration/guide/ve_book/ve_book.html
Configurable SIP Parameter Modification
Allows users to change the standard SIP messages sent from the Cisco SIP stack for better interworking with different SIP entities. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
Configurable Bandwidth Parameters for SIP Calls
This features provides the ability to manually configure the bandwidth that is signaled in the outbound SIP invite. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
SIP - Ability to Send a SIP Registration Message on a Border Element
This feature provides a new command configured under the SIP-UA that allows the Border Element to send a REGISTRATION command to a SIP REGISTRAR. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
SIP Delayed Offer to Early Offer for Video Calls
This feature allows a SIP delayed offer video call to be translated into a SIP early offer video call when traversing the Cisco Unified Border Element. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
SIP - Support for SIP Video Calls with Flow Around Media
This feature allows a SIP video call media flow around the Cisco Unified Border element. Previous support was for call scenarios where the media flowed through the Border Element. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
SIP - Support for SESSION REFRESH with reINVITEs
This feature expands the ability of the Cisco Unified BE to control the session refresh parameters and ensure the session does not time out. For more information, see:
http://cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html
New Features in Release 12.4T
For information regarding the features supported in Cisco IOS Release 12.4T, see the Cross-Platform Release Notes links at: http://www.cisco.com/en/US/products/ps6441/prod_release_notes_list.html
Limitations and Restrictions
The following limitations and restrictions apply to the Cisco IAD 2801 series
•
Fixed Configuration Platforms Supporting Specific Cards
The Cisco IAD2801 series are fixed configuration platforms with each slot supporting specific cards. Supported cards in each model are shown below:
Table 2 Supported cards in Cisco IAD2801 series
IAD2801-2BRI-A/K9
VIC2-2BRI-NT/TE-P
HWIC-1ADSL
Not Available
LTD Option1
IAD2801-4BRI-A/K9
VIC2-2BRI-NT/TE-P
HWIC-1ADSL
VIC2-2BRI-NT/TE-P
LTD Option1
IAD2801-4BRI-S/K9
VIC2-2BRI-NT/TE-P
HWIC-4SHDSL
VIC2-2BRI-NT/TE-P
LTD Option1
1 LTD OPTION (Factory installable or Field Upgradeable)
1 - HWIC-AP-AG-E and HWIC-AP-G-E
1 - HWIC-4ESW
1 - VIC-4FXS/DID
Unsupported Card Message
If any unsupported card is detected during the bootup, the following message appears:
"Card is not supported in slot 2. Please remove it."
This message appears for each unsupported card detected.
If any cards are not supported and smart-init is enabled, another message appears during bootup:
Smart Init is enabledsmart init is sizing iomemID MEMORY_REQ TYPE0X003AA110 public buffer pools0X00211000 public particle pools0X00020000 Crypto module pools0X00120000 VPM buffer pools0X05B3 0X000034A0 Card in slot 00X04C8 0X00077D00 Card in slot 10X05B3 0X00000000 UNKNOWN Card in slot 20X003A 0X00000000 Card in slot 30X000021B8 Onboard USBCaveats
For general information on caveats and the bug toolkit, see About Cisco IOS Release Notes located at http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
This section contains the following caveat information:
•
•
•
•
•
•
Open Caveats - Release 12.4(15)XZ2
There are no open caveats in this release.
Resolved Caveats - Release 12.4(15)XZ2
•
Multiple Cisco products are affected by denial of service (DoS) vulnerabilities that manipulate the state of Transmission Control Protocol (TCP) connections. By manipulating the state of a TCP connection, an attacker could force the TCP connection to remain in a long-lived state, possibly indefinitely. If enough TCP connections are forced into a long-lived or indefinite state, resources on a system under attack may be consumed, preventing new TCP connections from being accepted. In some cases, a system reboot may be necessary to recover normal system operation. To exploit these vulnerabilities, an attacker must be able to complete a TCP three-way handshake with a vulnerable system.
In addition to these vulnerabilities, Cisco Nexus 5000 devices contain a TCP DoS vulnerability that may result in a system crash. This additional vulnerability was found as a result of testing the TCP state manipulation vulnerabilities.
Cisco has released free software updates for download from the Cisco website that address these vulnerabilities. Workarounds that mitigate these vulnerabilities are available.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090908-tcp24.shtml.
CSCsr16693 A series of TCP packets may cause a denial of service (DoS) condition on Cisco IOS devices that are configured as Easy VPN servers with the Cisco Tunneling Control Protocol (cTCP) encapsulation feature.Cisco has released free software updates that address this vulnerability. No workarounds are available; however, the IPSec NAT traversal (NAT-T) feature can be used as an alternative.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090325-ctcp.shtml.
Note: The March 25, 2009, Cisco IOS Security Advisory bundled publication includes eight Security Advisories. All of the advisories address vulnerabilities in Cisco IOS Software. Each advisory lists the releases that correct the vulnerability or vulnerabilities in the advisory. The following table lists releases that correct all Cisco IOS Software vulnerabilities that have been published in Cisco Security Advisories on March 25, 2009, or earlier.
http://www.cisco.com/en/US/products/products_security_advisories_listing.html
CSCsu21828 A series of TCP packets may cause a denial of service (DoS) condition on Cisco IOS devices that are configured as Easy VPN servers with the Cisco Tunneling Control Protocol (cTCP) encapsulation feature.Cisco has released free software updates that address this vulnerability. No workarounds are available; however, the IPSec NAT traversal (NAT-T) feature can be used as an alternative.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090325-ctcp.shtml.
Note: The March 25, 2009, Cisco IOS Security Advisory bundled publication includes eight Security Advisories. All of the advisories address vulnerabilities in Cisco IOS Software. Each advisory lists the releases that correct the vulnerability or vulnerabilities in the advisory. The following table lists releases that correct all Cisco IOS Software vulnerabilities that have been published in Cisco Security Advisories on March 25, 2009, or earlier.
http://www.cisco.com/en/US/products/products_security_advisories_listing.html
CSCsv38166 The server side of the Secure Copy (SCP) implementation in Cisco IOS software contains a vulnerability that could allow authenticated users with an attached command-line interface (CLI) view to transfer files to and from a Cisco IOS device that is configured to be an SCP server, regardless of what users are authorized to do, per the CLI view configuration.This vulnerability could allow valid users to retrieve or write to any file on the device's file system, including the device's saved configuration and Cisco IOS image files, even if the CLI view attached to the user does not allow it. This configuration file may include passwords or other sensitive information.
The Cisco IOS SCP server is an optional service that is disabled by default. CLI views are a fundamental component of the Cisco IOS Role-Based CLI Access feature, which is also disabled by default. Devices that are not specifically configured to enable the Cisco IOS SCP server, or that are configured to use it but do not use role-based CLI access, are not affected by this vulnerability.
This vulnerability does not apply to the Cisco IOS SCP client feature.
Cisco has released free software updates that address this vulnerability.
There are no workarounds available for this vulnerability apart from disabling either the SCP server or the CLI view feature if these services are not required by administrators.
This advisory is posted at the following link:
http://www.cisco.com/warp/public/707/cisco-sa-20090325-scp.shtml.
CSCsu11522 A vulnerability exists in the Session Initiation Protocol (SIP) implementation in Cisco IOS software that can be exploited remotely to cause a reload of the Cisco IOS device.Cisco has released free software updates that address this vulnerability. There are no workarounds available to mitigate the vulnerability apart from disabling SIP, if the Cisco IOS device does not need to run SIP for VoIP services. However, mitigation techniques are available to help limit exposure to the vulnerability.
This advisory is posted at the following link:
http://www.cisco.com/warp/public/707/cisco-sa-20090325-sip.shtml.
CSCsr29468 Cisco IOS software contains a vulnerability in multiple features that could allow an attacker to cause a denial of service (DoS) condition on the affected device. A sequence of specially crafted TCP packets can cause the vulnerable device to reload.Cisco has released free software updates that address this vulnerability.
Several mitigation strategies are outlined in the workarounds section of this advisory.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090325-tcp.shtml
CSCsq50366 Last digit getting truncated when prefix is set to its max value of 32.Symptom Last digit getting truncated when prefix is configured with a length of 32 under the dial-peer.
Conditions
This is seen in the following call scenario:
1.
2.
3.
4.
5.
6.
7.
Workaround
CSCsr68545 Error %DATACORRUPTION-1-DATAINCONSISTENCY when running ipsla with rtt.Symptom Error message occurs:
000302: Jul 24 13:00:13.575 CDT: %DATACORRUPTION-1-DATAINCONSISTENCY: copy error -Traceback= 0x410FD1A4 0x41119DB0 0x41138324 0x41DE5714
Conditions
Workaround
CSCsr27960 Traceback observed after configuring credential under sip-ua.Symptom Traceback observed when configuring credentials CLI under sip-ua.
Conditions
Workaround
CSCso58935 Caller ID still display Barge for point-to-point call between sccp share.Symptom Caller ID still display To Barge for point to point call between two sccp shared line phones after the other party drops out from cBarge conference.
Workaround
CSCsr14658 CLI Cannot handle Double quotes.Symptom CME 4.3. IOS 12.4.15XZ SP Services. Under telephony-service the following url services was configured:
http://10.1.1.1 "My service"
Note the quotes. On the running config you see the above command without the quotes and everything works fine. When you type wr, then you again see the same command without the quotes. The issue is that, when you reload the router, the command is there, but it is not accepted and you have to type it again. Also, if you type url services http://10.1.1.1 My service, then you get an error of invalid input.
Conditions
Workaround
CSCsq48167 CME DN description command may allow for open-ended quote delimination.Symptom The CME description command under the ephone-dn potentially allows for the description string to be saved to the router configuration without a trailing quote. This leaves an open-ended delimination in the configuration for the description string, and will cause the CME GUI to fail to load with an "unterminated string constant" error.
Conditions
1.
<i>Entering</i>
Router(config)#ephone-dn 1
Router(config-ephone-dn)#description "01234567890123456789012345678912345"
<i>Appears as</i>
ephone-dn 1
description "01234567890123456789012345678912
2.
<i>Entering</i>
Router(config)#ephone-dn 1
Router(config-ephone-dn)#description "test
<i>Appears as</i>
ephone-dn 1
description "test
Workaround
Open Caveats - Release 12.4(15)XZ1
There are no open caveats in this release.
Resolved Caveats - Release 12.4(15)XZ1
•
Cisco IOS devices that are configured for Cisco Unified Communications Manager Express (CME) and the Extension Mobility feature are vulnerable to a buffer overflow vulnerability. Successful exploitation of this vulnerability may result in the execution of arbitrary code or a Denial of Service (DoS) condition on an affected device.
Cisco has released free software updates that address this vulnerability.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20090923-cme.shtml
CSCso67655 S2 CFD: Secure DSPFarm doesn't register after a reload of the routerSymptom After Reload Secure Conference profile does not register with CCM
Conditions
Workaround
CSCsm71666 eem changes for LLP64 in mcp_devCSCsh23090 Police action cannot be allowed for a policy to be attached to self zoneSymptom Police action gets configured on a policy associated to self zone.
Conditions
Workaround
CSCsk42373 Memory leak in ctid_set_changetime functionSymptom Memory leak is observed after the device boots up. 'sh mem debug leaks chunks' will show the leak. The memory leak shows up against "SNMP SMALL CHUNK" as the memory is allowed by MakeOctetString, called from reg_invoke_ctid_get_octet_string.
CSCsl08086 Ping Traffic Dropped: Dialer based PPPoECSCsl26908 ASSERTION FAILED: file "../les/if_les_bri_i3081.c", line 744Symptom Assertion message displays.
CSCsl99275 High CPU on 5400XM when doing show flashSymptom High CPU can be seen on Cisco AS5400XM after given uptime.
Conditions
Workaround
CSCsm34706 CUBE sends fixed DTMF duration and ignores received H.245 User InputSymptom CUBE sends a fixed 800 time units for every digit pressed (sent via RFC 2833) regardless of what it receives in the duration of a H.245 User Input field.
Conditions
Workaround
CSCsm37093 CME 4.1after security is enabled 7970 will register with US localeSymptom After security is enabled locale in the phone 7970 cannot be changed.
Conditions
Workaround
CSCsm64258 ephone-hunt group does NOT present calls to overlaid DNsSymptom When an ephone hunt-group is configured with 'present-call idle-phone', the ephone hunt-group skips the DNs which are configured as overlay.
Conditions
Workaround
CSCsm69056 IEC error (Software Error) seen on CME & CUBE when doing Call Fwd No AnsSymptom CME and CUBE may display the following error message when forwarding a call. "CCAPI: Internal Error (Software Error)"
Conditions
Workaround
CSCsm74560 sdatar phone does not look for network locale file for user defined languagesSymptom Wireless IP phone 7920 doesn't download the 7960-tones.xml files when user defined network locale is configured
Conditions
Workaround
For example DE - Germany
telephony-service
network-locale DE
create cnf-files
Now rename the user defined file to 'germany_7960-tones.xml'
Replace the file under ITS directory with the new 'germany_7960-tones.xml' (Make sure the name is the system defined name)
DO NOT run 'create cnf-file' as it will again override with the system defined parameters
Reboot the 7921 wireless phone
In case if you have to issue 'create cnf-file', then ensure to repeat all the steps mentioned above again.
CSCsm88771 CME trunk optimized calls being put on hold automaticallySymptom Answering a trunk call transferred from another phone is automatically put on hold and cannot be resumed.
Conditions
Workaround
CSCsm89158 7921 does not display call park number while the call is parked
Symptom 7921 does not show the parked number when the call is parked.
Conditions
Workaround
CSCso45208 Unable to specify ephone-hunt extensions in ascending orderSymptom Cannot set ephone-hunt list members in certain orders during configurations.
Conditions
Workaround
CSCso48788 ActiveLine not reset back to 0 when offhook timer expiredSymptom When the phone is onhold call and if you press another button to seize a new call but left offhook till timer expired (the seize call will back onhook), the button become un-usable after that.
Conditions
Workaround
CSCso56129 %SYS-2-BADSHARE: Bad refcount in datagram_done monitoring cme/cue callsSymptom Bad Refcount with tracebacks.
Conditions
Workaround
CSCso64585 redundant CallRemoteMultiLine sccp msg to monitor park DNSymptom Jitter or voice quality issue may occur.
Conditions
Workaround
CSCso66843 CUBE and CME do not change embedded SSRC in RTCP packetsSymptom Different SSRC in RTCP compared to RTP after transcoding.
Conditions
Workaround
CSCso67655 S2 CFD: Secure DSPFarm doesn't register after a reload of the routerSymptom After Reload Secure Conference profile does not register with CCM.
Conditions
Workaround
CSCso74656 MG2:device-based BLF shown incorrect status for EMCSCso75055 SysObjID Missed in SR 520 RoutersCSCso78702 7961 IP Phone acct softkey get "no park number available"Symptom 2851 Version 12.4(15)T4 press the ACCT SoftKey and get "NO PARK NUMBER AVAILABLE".
CSCso79611 cBarge:Traceback found at x40C66334:SkinnyHWConfAPI(0x40c628c0)+0x3a74Symptom Trace back appears while doing transfer of barge call from barge initiator to a SIP phone.
Conditions
Workaround
CSCso82469 Improper message displayed when user tries to create new mailSymptom When the user tries to create new mail and OWA displays an improper message like the "page cannot be displayed".
Workaround
CSCso83726 Ignore CFA for voice hunt-groups similar to ephone-huntSymptom Call Forward setting are NOT ignored for members of "voice hunt group" on Cisco Unified Communications Manager Express.
Conditions
Workaround
CSCso83948 Tracebacks pointing to CS_ProcessRerouteFailure - No release note enclosureCSCso88429 CME/CUBE rejects incoming SIP INVITE if Max-Forwards > 70Symptom CME or CUBE will reject an inbound SIP INVITE if Max-Forwards is greater than 70.
Conditions
The Max-Forwards header field must be used with any SIP method to limit the number of proxies or gateways that can forward the request to the next downstream server. This can also be useful when the client is attempting to trace a request chain that appears to be failing or looping in mid-chain. The Max-Forwards value is an integer in the range 0-255 indicating the remaining number of times this request message is allowed to be forwarded. This count is decremented by each server that forwards the request. The recommended initial value is 70. This header field should be inserted by elements that can not otherwise guarantee loop detection. For example, a B2BUA should insert a Max-Forwards header field.
Workaround
CSCso89001 Reload Steeler cause LWAPP AP change BOOT to autonomous modeSymptom When AP is in LWAPP mode and C880 reloads, C880 first comes up, console session to AP right away, you can see AP displays invalid license messages. Also show boot on AP points to an autonomous image.
Conditions
Workaround
CSCso95643 sRTP Package missing in c1861
Symptom MGCP srtp-package option is not available in c1861 platform.
Workaround
CSCso99426 Ringing delay of approx 3 secs on some ephones of blast hunt grpSymptom 3 sec delay experienced in some ephones as hunt group members with shared DNs/monitor DN's
Conditions
Workaround
CSCsq01339 CME - increase support for local entries to 250CSCsq07606 Blast:Memory leak at AFW_application ivr: rerouteNumber SSrerouteInfo_tSymptom Memory leak at AFW_application ivr: rerouteNumber SSrerouteInfo_t
Conditions
Workaround
CSCsq10768 Intermittent Live-Record failure in CMESymptom Random failure of Live-Record functionality in CUCME may be observed. The phone indicates a message "Live Record Failed!".
Conditions
Workaround
CSCsq15064 RDT: crash seen with null pointer during reload on C860w (with AP)Symptom On steelers, issues command reload and say 'yes' to reload AP, the system crash.
Conditions
Workaround
CSCsq15847 Watch button can't exist with normal dn and causes no ringingSymptom The phone may not ring if the incoming call is designated to the overlaid DN which is also configured on other button as a W or M button.
Conditions
Workaround
CSCsq17862 CME 4.3/ TSP Caller ID not displayed in TAPI clientSymptom The Caller ID is not displayed on UCC client when using CME 4.3. When the IP phone is tied to UCC, it displays the Caller ID.
Conditions
Workaround
CSCsq25714 present-call should not be an option for CLI callqueueSymptom The CLI "present-call" is available under "callqueue". It is shown outside of the ephone-hunt.
Conditions
Workaround
CSCsq26111 Name for the line or speeddial button may be truncated by SRSTSymptom The extension number and speed dial number may not be displayed in full length on a fallback ephone.
Conditions
Workaround
CSCsq31077 Router crash at bootup, trace ending in cce_dp_policy_get_class_instance CSCsq33020 hall c88x machine check exception informationSymptom Router crashes if the same inspect policy is applied to more than 7 zone-apirs.
Workaround
CSCsq36422 URLF:need have unified deny-page format for different browsersSymptom The display of deny-page is different with different browsers.
Conditions
Workaround
CSCsq39195 Apply QE_QMC patch to Steelers data BRISymptom New FPGA to solve Steelers BRI lock up issue.
Conditions
Workaround
CSCsq41137 max-reserved-bandwidth config is lost after reloadSymptom max-reserved-bandwidth is removed upon reload.
Workaround
CSCsq41189 Memory Leak - "Presence Process"Symptom Memory Leak with "Presence Process", this could lead to router crash.
Workaround
CSCsq42134 JPN: 7921 XML Services are displayed as squaresSymptom 7921 directories are displayed as squires in CME Userlocale: JP environment.
Conditions
Workaround
CSCsq42153 Move up CCE Firewall switching path hook next to CCE Post NATSymptom Firewall classification is done prior to few other features.
Conditions
Workaround
CSCsq42689 JPN: XML parse error when accessing My Phone Apps > Speed Dial ButtonsCSCsq49894 SIP TNP phone fails to ring after receiving INVITE messageCSCsq51090 DSPware 23.6.1 Release IOS CommitCSCsq51500 TTI petitioner page fails to bring up when using ezsdd/welcomeSymptom 7970 SIP phone fails to ring and connect after receiving INVITE message.The SCCP phone involved in the scenario registers fine. The 7970 SIP phone gets registered initially, but later the dial-peer does not come up so the phone un-registers.
Conditions
Workaround
CSCsq52296 Overlay numbers are ignored on single button extension mobility phonesSymptom Overlay numbers are ignored.
Conditions
Workaround
CSCsq54601 SCCP&SIP Registration failure with Ezvpn and NATSymptom SCCP&SIP Registration failure with Ezvpn and NAT.
Conditions
Workaround
CSCsq54690 dx 3G modem sw locking: remove the Generic GSM SKU id supportCSCsq56103 Service-policy is not attached with priority by removing in serial intSymptom Causes configuration issues for serial interface.
Conditions
Conditions
Conditions
Workaround
CSCsq62269 3270 crash if no startup configurationSymptom If 3270 has no startup configuration, it will crash by following or terminating the auto install.
Conditions
Workaround
CSCsq64715 EM login credential could be set to stack junk in error conditionSymptom EM login username and password may be set to random values in process stack in case the actual input from the phone is in an invalid format. And if both string picked up from the stack happened to match a username/password pair in a configured user profile, EM will login the user accidentally.
Conditions
Workaround
CSCsq74767 CME transfers hold to different phone with overlay on Stimulus messageSymptom A call put on hold is picked up by another user in an overlay situation.
Conditions
Workaround
CSCsq90567 TSP gets stuck at connected state when a shared dn is resumedSymptom The TSP gets stuck in connected state.
Conditions
Workaround
CSCsq92958 Typical intercom ext # not added to voice-logout profileSymptom Numbers with alphabetic characters are ignored in EM profile.
Conditions
Workaround
CSCsq93564 Only 8 button are available for phones with add-on module 7914/7915/7916Symptom When 7975 (7965) IP phone with add-on module (7914/7915/7916) fallback to SRST4.3, only 8 (6) lines are available during SRST fallback.
Conditions
Workaround
CSCsq94677 SRST4.3 The last channel of all DNs is invalid after 2nd fallbackSymptom The 2nd channel for a dual-line DN or the 8th channel for octo-line DN is not available for a fallback phone.
Conditions
Workaround
CSCsr02593 incoming call wrongly ring SCCP overlay because of memory corruptionSymptom An incoming call for DN 2 rings both the SCCP phone A which has the DN and another SCCP phone B without it but has an overlay line. DN 2 and overlay line aren't shared line. Incoming call for the overlay only rings the overlay but incoming call for DN 2 will ring both.
Workaround
CSCek78623 ISSU infra test using expect & SESUTCSCsg56685 Handle review comments about PRR#126487CSCsj42809 GLBP flaps after SSO (fix: RF_PROG_ACTIVE_FAST; proc priority)CSCsj46764 ancaz VLAN Manual LB - HA SupportCSCsj55804 HSRP flaps after SSO with 100 peers and default timerCSCsk11684 Remove unused MRIB RP proxy codeCSCsk25878 alignment error flow_exp_v9_adjust_length flow_common_send_dataSymptom An alignment error may occur. This can cause a crash on certain routers and a traceback on others.
Conditions
Workaround
CSCsl32593 IPv6 SLA: Need to add flow_label to in6_pktinfo for the responderCSCsl50516 FNF possible alignment errors when wring v9 headerSymptom An alignment error may occur, which may also lead to crash.
Conditions
Workaround
CSCsm12905 FNF: monitor can not be removed when interface removedCSCsm54873 EEM some time are not triggered properlySymptom Embedded Event Manager (EEM) rules may not trigger properly when performing SIP OIR.
Conditions
Conditions
Workaround
Further Problem Description: This can impact customers that use the Embedded Event Manager with EEM applets or policies that interact with the CLI. It was seen on the ASR platform and other platforms when "sched heapchecks process" was enabled. A timing issue can cause EEM action CLI commands to not coordinate with the IOS exec properly.The SIP2 is probably related to the ASR platform. An OIR event issued to trigger the specific EEM policy. This should occur with any EEM type policy however.
SXF is not impacted by this bug.
CSCsm58164 Default publish timers are not set properly when configured.CSCsm62598 EEM action cns_event missing from Tcl action list.CSCsm83056 FNF - FLOW MON: '<name>' could not setup cache control planeCSCsm84550 WI08: Unable to remove eem cli event by using 'no event cli'Symptom Unable to remove EEM cli event by using 'no event cli'.
Conditions
Workaround
CSCsm84550 WI08: Unable to remove eem cli event by using 'no event cli'CSCso01595 VS2: ~ 31000 Remote registry calls with VIRTUAL_SW:79 in fh_server.procCSCso17255 FNF - IPv6 payload chunk has arbitrary data after the end of the payloadCSCso29011 MF:Ipv6 mtu isn't restricted by smaller L2 mtu, becomes invalid afterCSCso32575 Move issue, chkpt and rf client ids to true component system-idCSCso39518 fh_policy_dir.proc process crash when activate 0E patchSymptom Before applying patch with EEM policy dir subsystem in it, there is one or more EEM applets configured, after the patch is activated, trigger an EEM applet.
Unconfigure all the EEM applet config before patching, then apply all the EEM applet config after activate the patch.This would lead to (fh_policy_dir.proc)process crash, not a device crash. This bug is specific to modular IOS image.
Workaround
CSCso43772 Adding matched syslog info to syslog EDCSCso50752 Buffer size should match the msg queue size in the syslog EDCSCso53727 Need to add new hm test in diags to test LTL memory consistencyCSCso57084 improve "Process Forced Exit" console messageCSCso70327 C2W2: process deadlock encountered during ISSU rollbackCSCso76885 call-home diagnostic message is sent for every diag HM failureCSCso83318 EEM: Build failure in v2,3CSCso99953 /vob/cisco.comp/ipv6_forwarding/icmp/src/ipv6_icmp.c:memory leakOpen Caveats - Cisco IOS Release 12.4(15)XZ
CSCso39750- router crashes at socket_inherit_fd after no ccm sccpCSCsm65870- Excessive CCE dp feature memory leak as uut stressed at 99% cpuCSCso21397- TB@ const_mfib_lc_free after peer router crashedCSCso66410- software reload while reconfiguring bandwidth under policy mapResolved Caveats - Cisco IOS Release 12.4(15)XZ
CSCsl62609Multiple vulnerabilities exist in the Session Initiation Protocol (SIP) implementation in Cisco IOS that can be exploited remotely to trigger a memory leak or to cause a reload of the Cisco IOS device.
Cisco has released free software updates that address these vulnerabilities. Fixed Cisco IOS software listed in the Software Versions and Fixes section contains fixes for all vulnerabilities addressed in this advisory.
There are no workarounds available to mitigate the effects of any of the vulnerabilities apart from disabling the protocol or feature itself, if administrators do not require the Cisco IOS device to provide voice over IP services.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-sip.shtml.
CSCso57523- Call from SIP trunk to route point fails due to MALLOC failureSymptom No audio and memory allocation failures when an incoming call through SIP trunk is connecting to route point(AA/ICD).
Conditions
Workaround
CSCsm15782 -CCE-FW: Class-map with 'match class-map' does not seem to match trafficSymptom Traffic may not match a class which contains 'match class-map' statement.
Conditions
Workaround
CSCsi01875- IPIP gateway rejects a second TCSSymptom Placing a video call from a Polycom device. The call gets rejected because Polycom sends a TCS before receiving the TCS ACK.
Conditions
Workaround
CSCsl38148- GSM:Download from the network file when a abort sequence detectedSymptom When trying to download a video over the network, after a while the download stops. To start the download again, the TTY line has to cleared and the call established and again, or the router needs to be power cycled.
Conditions
Workaround
CSCsl88522- TNP problem with Skinny version 9 v2 messages while in SRST modeSymptom TNP phone doesn't handle incoming StationLineStatV2Message during phone fallback to SRST mode. Also Phone doesn't send V2 messages to SRST box. So TNP phone doesn't have V2 support incorporated in it.
Conditions
Workaround
CSCsm12220- SS-DO calls are failing interworking with CUCMSymptom H323-SlowStart to SIP-DelayedOffer call fails on CUBE
Conditions
Workaround
CSCso34468- Reduce IOMEM size to 10% from 25% on C3250CSCso03073- Steelers: Seeing %PARSER-4-INVLDLINE: Invalid line in NV generationCSCsm86531- Basic Hold/Resume fails with two CUBEs having H.323 and SIP legsCSCsm33761- VIC3-2FXS-E/DID supportCSCsm68868- IPIPGW Spurious Mem Access while processing DiversionCSCsm25556- c8xx crashes when refuse-message is entered under line vtyCSCsm12911- Need to change console message when doing firmware upgradeCSCsl77047- Memoryleak @CCH323_CT when Universal Xcoding call for H323-SIP on IPIPGWCSCsl60102- Tx/Rx Interrupt Counters displayed twice in show controller f0 outputCSCsm72881- Router crashes after removing ipv6-addressCSCso14297 -parser validation is wrong for usb-devices with most of the CLIsCSCsm31048- CTM server dos not compile with CTC 9.0CSCsm17819- Need number of temp sensor return to hostCSCsq15064 RDT: crash seen with null pointer during reload on C860w (with AP)Symptom On steelers, when you issue a reload command and say "yes" to reload AP, the system crashes.
Conditions
Workaround
Limitations and Restrictions
The ISDN lease line feature is not supported in this release.
Additional References
Use this release note with the documents and websites in this release note and the documents listed in the following sections:
Release-Specific Documents
The following documents are specific to Release 12.4 and apply to Release 12.4(15)XZ.
•
•
•
Platform-Specific Documents
Hardware installation guides, configuration and command reference guides, and additional documents specific to the Cisco 2800 series routers are at:
http://www.cisco.com/en/US/products/ps7214/tsd_products_support_series_home.html
Cisco IOS Software Documentation Set
The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents.
Documentation Modules
Each module in the Cisco IOS documentation set consists of one or more configuration guides and one or more corresponding command references. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality, and contain comprehensive configuration examples. Chapters in a command reference provide complete command syntax information. Use each configuration guide with its corresponding command reference. Cisco IOS Software Documentation is available in html or pdf form.
Select your release and click the command references, configuration guides, or any other Cisco IOS documentation you need.
Notices
See the "Notices" section in About Cisco IOS Release Notes located at: http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4xy15/ReleaseNote.html.
Use this document in conjunction with the documents listed in the "Additional References" section.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2008-2009, Cisco Systems, Inc. All rights reserved.
Feedback