|
|
|
|
|
12.2SR |
Overview |
Overview of the Cisco IOS IP SLAs technology. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
12.2SR |
DHCP Operation |
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dhcp.html |
12.2SR |
DNS Operation |
The Cisco IOS IP SLAs Domain Name System (DNS) operation allows you to measure the difference between the time taken to send a DNS request and receive a reply. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dns.html |
12.2SR |
Ethernet Operation |
The Cisco IOS IP SLAs for Metro-Ethernet feature provides the capability to gather Ethernet-layer network performance metrics. Available statistical measurements for the IP SLAs Ethernet operation include round-trip time, jitter (interpacket delay variance), and packet loss. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
12.2SR |
FTP Operation |
The Cisco IOS IP SLAs File Transfer Protocol (FTP) operation allows you to measure the network response time between a Cisco device and an FTP server to retrieve a file. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_ftp.html |
12.2SR |
HTTP Operation |
The Cisco IOS IP SLAs Hypertext Transfer Protocol (HTTP) operation allows you to measure the network response time between a Cisco device and an HTTP server to retrieve a web page. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_http.html |
12.2SR |
ICMP Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html |
12.2SR |
ICMP Path Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathecho.html |
12.2SR |
ICMP Path Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path jitter operation allows you to measure hop-by-hop jitter (inter-packet delay variance). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathjitter.html |
12.2SR |
IP SLAs for IPv6 |
The Cisco IOS IP SLAs UDP jitter, UDP echo, ICMP echo, and TCP connect operations are supported for IPv6. |
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html |
12.2SR |
LSP Health Monitor |
The Cisco IOS IP SLAs label switched path (LSP) Health Monitor feature provides the capability to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
12.2SR |
LSP Health Monitor with LSP Discovery |
This enhancement to the IP SLAs - LSP Health Monitor feature provides automated end-to-end verification in the control plane and data plane for all LSPs between the participating Provider Edge (PE) routers. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
12.2SR |
Multioperation Scheduler |
The IP SLAs Multioperation Scheduler feature provides a highly scalable infrastructure for Cisco IOS IP SLAs by allowing you to schedule multiple IP SLAs operations using a single command. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |
12.2SR |
Proactive Threshold Monitoring |
Cisco IOS IP SLAs proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
12.2SR |
TCP Connect Operation |
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
12.2SR |
UDP Echo Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html |
12.2SR |
UDP Jitter Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html |
12.2SR |
UDP VoIP Operation |
The Cisco IOS IP SLAs Voice over IP (VoIP) User Datagram Protocol (UDP)UDP jitter operation allows you to proactively monitor VoIP quality levels in your network, allowing you to guarantee VoIP quality levels to your users. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter_voip.html |
12.2SR |
VCCV Operation |
The Cisco IOS IP SLAs VCCV operation supports Virtual Circuit Connectivity Verification (VCCV) for Pseudo-Wire Emulation Edge-to-Edge (PWE3) services across MPLS networks. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
|
12.2SX |
DHCP Operation |
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dhcp.html |
12.2SX |
DNS Operation |
The Cisco IOS IP SLAs Domain Name System (DNS) operation allows you to measure the difference between the time taken to send a DNS request and receive a reply. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dns.html |
12.2SX |
FTP Operation |
The Cisco IOS IP SLAs File Transfer Protocol (FTP) operation allows you to measure the network response time between a Cisco device and an FTP server to retrieve a file. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_ftp.html |
12.2SX |
HTTP Operation |
The Cisco IOS IP SLAs Hypertext Transfer Protocol (HTTP) operation allows you to measure the network response time between a Cisco device and an HTTP server to retrieve a web page. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_http.html |
12.2SX |
ICMP Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html |
12.2SX |
ICMP Path Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathecho.html |
12.2SX |
ICMP Path Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path jitter operation allows you to measure hop-by-hop jitter (inter-packet delay variance). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathjitter.html |
12.2SX |
LSP Health Monitor |
The Cisco IOS IP SLAs label switched path (LSP) Health Monitor feature provides the capability to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
12.2SX |
Multioperation Scheduler |
The IP SLAs Multioperation Scheduler feature provides a highly scalable infrastructure for Cisco IOS IP SLAs by allowing you to schedule multiple IP SLAs operations using a single command. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |
12.2SX |
Proactive Threshold Monitoring |
Cisco IOS IP SLAs proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
12.2SX |
TCP Connect Operation |
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
12.2SX |
UDP Echo Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html |
12.2SX |
UDP Jitter Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html |
12.2SX |
UDP VoIP Operation |
The Cisco IOS IP SLAs Voice over IP (VoIP) User Datagram Protocol (UDP)UDP jitter operation allows you to proactively monitor VoIP quality levels in your network, allowing you to guarantee VoIP quality levels to your users. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter_voip.html |
|
12.4T |
DHCP Operation |
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dhcp.html |
12.4T |
DLSw+ Operation |
The Cisco IOS IP SLAs Data Link Switching Plus (DLSw+) operation allows you to schedule and measure the DLSw+ protocol stack and network response time between DLSw+ peers. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dlsw.html |
12.4T |
DNS Operation |
The Cisco IOS IP SLAs Domain Name System (DNS) operation allows you to measure the difference between the time taken to send a DNS request and receive a reply. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dns.html |
12.4T |
Ethernet Operation |
The Cisco IOS IP SLAs for Metro-Ethernet feature provides the capability to gather Ethernet-layer network performance metrics. Available statistical measurements for the IP SLAs Ethernet operation include round-trip time, jitter (interpacket delay variance), and packet loss. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
12.4T |
FTP Operation |
The Cisco IOS IP SLAs File Transfer Protocol (FTP) operation allows you to measure the network response time between a Cisco device and an FTP server to retrieve a file. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_ftp.html |
12.4T |
HTTP Operation |
The Cisco IOS IP SLAs Hypertext Transfer Protocol (HTTP) operation allows you to measure the network response time between a Cisco device and an HTTP server to retrieve a web page. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_http.html |
12.4T |
ICMP Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html |
12.4T |
ICMP Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) Jitter operation allows you to generate a stream of ICMP packets between a Cisco IOS device (source) and any other IP device (destination) to gather network performance-related statistics. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_jitter.html |
12.4T |
ICMP Path Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathecho.html |
12.4T |
ICMP Path Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path jitter operation allows you to measure hop-by-hop jitter (inter-packet delay variance). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathjitter.html |
12.4T |
IP SLAs for IPv6 |
The Cisco IOS IP SLAs UDP jitter, UDP echo, ICMP echo, and TCP connect operations are supported for IPv6. |
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html |
12.4T |
LSP Health Monitor |
The Cisco IOS IP SLAs label switched path (LSP) Health Monitor feature provides the capability to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
12.4T |
Multioperation Scheduler |
The IP SLAs Multioperation Scheduler feature provides a highly scalable infrastructure for Cisco IOS IP SLAs by allowing you to schedule multiple IP SLAs operations using a single command. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |
12.4T |
Proactive Threshold Monitoring |
Cisco IOS IP SLAs proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
12.4T |
RTP Based VoIP Operation |
The IP SLAs Real-Time Transport Protocol (RTP)-based Voice over IP (VoIP) operation allows you to set up and schedule a test call and use Voice gateway digital signal processors (DSPs) to gather network performance-related statistics for the call. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_rtp_voip.html |
12.4T |
TCP Connect Operation |
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
12.4T |
UDP Echo Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html |
12.4T |
UDP Jitter Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html |
12.4T |
UDP VoIP Operation |
The Cisco IOS IP SLAs Voice over IP (VoIP) User Datagram Protocol (UDP)UDP jitter operation allows you to proactively monitor VoIP quality levels in your network, allowing you to guarantee VoIP quality levels to your users. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter_voip.html |
12.4T |
VoIP Call Setup (Post Dial Delay) Monitoring |
The Cisco IOS IP SLAs Voice over IP (VoIP) call setup operation allows you to measure network response time for setting up a VoIP call. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_call_setup.html |
12.4T |
VoIP Gatekeeper Delay Monitoring |
The Cisco IOS IP SLAs Voice over IP (VoIP) gatekeeper registration delay operation allows you to measure the average, median, or aggregated network response time of registration attempts from a VoIP gateway to a VoIP gatekeeper device. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_gatekpr_voip.html |
|
15.1(1)T |
Cisco IP SLAs Engine 3.0 |
The auto IP Service Level Agreements (SLAs) function in Cisco IOS IP SLAs Engine 3.0 includes auto-measure groups, automatic registration, and support for active measurement of QoS for auto IP SLAs operations. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_auto_ipslas.html |
15.1(1)T |
IEEE 802.1ag - D8.1 standard Compliant CFM, IP SLA for Ethernet |
Support for CFM d8.1 replaces support for CFM d1.0. IP SLAs integration with CFM d1.0 continues to be supported in Cisco IOS Release 15.0M and Cisco IOS Release 12.4(20)T. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
|
15.0(1)S |
DHCP Operation |
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dhcp.html |
15.0(1)S |
Distribution of Statistics |
The IP SLAs Distribution of Statistics feature can group distributions of data that have similar metrics and store them in the Cisco IOS device |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
DLSw+ Operation |
The Cisco IOS IP SLAs Data Link Switching Plus (DLSw+) operation allows you to schedule and measure the DLSw+ protocol stack and network response time between DLSw+ peers. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dlsw.html |
15.0(1)S |
DNS Operation |
The Cisco IOS IP SLAs Domain Name System (DNS) operation allows you to measure the difference between the time taken to send a DNS request and receive a reply. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dns.html |
15.0(1)S |
FTP Operation |
The Cisco IOS IP SLAs File Transfer Protocol (FTP) operation allows you to measure the network response time between a Cisco device and an FTP server to retrieve a file. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_ftp.html |
15.0(1)S |
History Statistics |
Cisco IOS IP SLAs maintains the following three types of history statistics: •Aggregated statistics •Operation snapshot history •Distribution statistics |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
HTTP Operation |
The Cisco IOS IP SLAs Hypertext Transfer Protocol (HTTP) operation allows you to measure the network response time between a Cisco device and an HTTP server to retrieve a web page. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_http.html |
15.0(1)S |
ICMP Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html |
15.0(1)S |
ICMP Path Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathecho.html |
15.0(1)S |
IP SLAs for Metro Ethernet |
The IP Service Level Agreements (SLAs) for Metro-Ethernet feature provides the capability to gather Ethernet-layer network performance metrics. Available statistical measurements for the IP SLAs Ethernet operation include round-trip time, jitter (interpacket delay variance), and packet loss. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
15.0(1)S |
IP SLAs Metro-Ethernet 2.0 (EVC) |
Support for Ethernet Virtual Circuits (EVCs) was added to Metro-Ethernet operations. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
15.0(1)S |
IP SLAs Metro-Ethernet 3.0 (CFM d8.1) |
Support for port level statistical measurements was added to Metro-Ethernet operations. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html |
15.0(1)S |
IP SLAs for MPLS Pseudo Wire (PWE3) via VCCV |
The IP SLAs VCCV operation was added to support Virtual Circuit Connectivity Verification (VCCV) for Pseudo-Wire Emulation Edge-to-Edge (PWE3) services across MPLS networks. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
15.0(1)S |
LSP Health Monitor |
The Cisco IOS IP SLAs label switched path (LSP) Health Monitor feature provides the capability to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
15.0(1)S |
LSP Health Monitor with LSP Discovery |
This enhancement to the IP SLAs - LSP Health Monitor feature provides automated end-to-end verification in the control plane and data plane for all LSPs between the participating Provider Edge (PE) routers. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
15.0(1)S |
MPLS VPN Awareness |
Provides the capability to monitor IP service levels within Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
Multioperation Scheduler |
The IP SLAs Multioperation Scheduler feature provides a highly scalable infrastructure for Cisco IOS IP SLAs by allowing you to schedule multiple IP SLAs operations using a single command. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |
15.0(1)S |
One Way Measurement |
Cisco IOS IP SLAs uses active traffic monitoring—the generation of traffic in a continuous, reliable, and predictable manner—for measuring network performance. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
Path Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path jitter operation allows you to measure hop-by-hop jitter (inter-packet delay variance). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathjitter.html |
15.0(1)S |
Reaction Threshold Monitoring |
Cisco IOS IP SLAs proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
15.0(1)S |
Scheduler |
Cisco IP SLAs supports a variety of scheduling options, such as scheduling a single Cisco IOS IP SLAs operation or a group of operations at one time. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
SNMP Support |
Cisco IOS IP SLAs can send SNMP traps that are triggered by specified events. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
15.0(1)S |
TCP Connect Operation |
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
15.0(1)S |
UDP Based VoIP Operation |
The Cisco IOS IP SLAs Voice over IP (VoIP) User Datagram Protocol (UDP)UDP jitter operation allows you to proactively monitor VoIP quality levels in your network, allowing you to guarantee VoIP quality levels to your users. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter_voip.html |
15.0(1)S |
UDP Echo Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html |
15.0(1)S |
UDP Jitter Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html |
15.0(1)S |
VoIP Threshold Traps |
Cisco IOS IP SLAs VoIP proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
|
Cisco IOS XE 3.0.1SG |
DHCP Operation |
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dhcp.html |
Distribution of Statistics |
The IP SLAs Distribution of Statistics feature can group distributions of data that have similar metrics and store them in the Cisco IOS device |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
Cisco IOS XE 3.0.1SG |
DNS Operation |
The Cisco IOS IP SLAs Domain Name System (DNS) operation allows you to measure the difference between the time taken to send a DNS request and receive a reply. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_dns.html |
FTP Operation |
The Cisco IOS IP SLAs File Transfer Protocol (FTP) operation allows you to measure the network response time between a Cisco device and an FTP server to retrieve a file. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_ftp.html |
History Statistics |
Cisco IOS IP SLAs maintains the following three types of history statistics: •Aggregated statistics •Operation snapshot history •Distribution statistics |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
HTTP Operation |
The Cisco IOS IP SLAs Hypertext Transfer Protocol (HTTP) operation allows you to measure the network response time between a Cisco device and an HTTP server to retrieve a web page. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_http.html |
ICMP Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html |
ICMP Path Echo Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathecho.html |
IPv6 - IP SLAs (UDP Jitter, UDP Echo, ICMP Echo, TCP Connect) |
The Cisco IOS IP SLAs UDP jitter, UDP echo, ICMP echo, and TCP connect operations are supported for IPv6. |
•http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html •http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html •http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_echo.html •http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
Cisco IOS XE 3.0.1SG |
LSP Health Monitor |
The Cisco IOS IP SLAs label switched path (LSP) Health Monitor feature provides the capability to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
LSP Health Monitor with LSP Discovery |
This enhancement to the IP SLAs - LSP Health Monitor feature provides automated end-to-end verification in the control plane and data plane for all LSPs between the participating Provider Edge (PE) routers. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
MPLS Pseudo Wire (PWE3) via VCCV |
The Cisco IOS IP SLAs VCCV operation supports Virtual Circuit Connectivity Verification (VCCV) for Pseudo-Wire Emulation Edge-to-Edge (PWE3) services across MPLS networks. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html |
MPLS VPN Awareness |
Provides the capability to monitor IP service levels within Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
Multioperation Scheduler |
The IP SLAs Multioperation Scheduler feature provides a highly scalable infrastructure for Cisco IOS IP SLAs by allowing you to schedule multiple IP SLAs operations using a single command. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |
One Way Measurement |
Cisco IOS IP SLAs uses active traffic monitoring—the generation of traffic in a continuous, reliable, and predictable manner—for measuring network performance. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
Path Jitter Operation |
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path jitter operation allows you to measure hop-by-hop jitter (inter-packet delay variance). |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_icmp_pathjitter.html |
Reaction Threshold Monitoring |
Cisco IOS IP SLAs proactive threshold monitoring capability allows you to configure an IP SLAs operation to react to certain measured network conditions. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_threshold_mon.html |
Scheduler |
Cisco IP SLAs supports a variety of scheduling options, such as scheduling a single Cisco IOS IP SLAs operation or a group of operations at one time. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
SNMP Support |
Cisco IOS IP SLAs can send SNMP traps that are triggered by specified events. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_overview.html |
TCP Connect Operation |
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_tcp.html |
Cisco IOS XE 3.0.1SG |
UDP Echo Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) echo operation allows you to measure end-to-end network response time between a Cisco device and other devices using IP |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_echo.html |
UDP Jitter Operation |
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_udp_jitter.html |
Random Scheduler |
The IP SLAs Random Scheduler feature provides the capability to schedule multiple IP SLAs operations to begin at random intervals uniformly distributed over a specified duration of time and to restart at uniformly distributed random frequencies within a specified frequency range. |
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_multi_scheduler.html |