Network Convergence System 540 Series Routers
What's New in Cisco IOS XR Release 24.2.1
For more details on the Cisco IOS XR release model and associated support, see Software Lifecycle Support Statement - IOS XR.
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
The following features are supported on all the NCS 540 router variants.
| Feature | Description |
|---|---|
|
Routing |
|
|
This feature introduces support for NCS 540 routers as a Seamless BFD (SBFD) reflector. Seamless BFD simplifies the negotiation and state establishment aspects of BFD by predetermining session discriminators and maintaining session state only at the headend. This approach ensures quicker connectivity tests and reduces complexity in session establishment. Previously, support for Seamless BFD reflector was not available. The feature introduces these changes: CLI: The sbfd command is extended to support NCS 540 routers. |
|
|
Segment Routing |
|
|
Data Plane Validation for SR-MPLS IPv6-based Controller Instantiated LSPs |
You can now verify the network configuration and paths and policies set up, without interrupting or potentially disrupting live network traffic, for SR-MPLS (Segment Routing over Multiprotocol Label Switching) IPv6-based Label Switched Paths (LSPs). With this feature, you can validate controller instantiated LSPs programmed directly into the forwarding hardware. Previously, SR data plane validation was possible over IPv4-based LSPs. The feature introduces these changes: CLI: The dataplane-only keyword is introduced in the traceroute sr-mpls and ping sr-mpls commands. YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
In Segment Routing over an IPv6 network (SRv6), you can measure packet delay from the source to a specific IP endpoint. You can use this information for troubleshooting, network maintenance, and optimizing network performance. Additionally, you can use flow labels to verify the delay of each subsequent hop path towards the IP endpoint of that path. So that, when network traffic is distributed across multiple available paths towards an IP endpoint, delay measurement tracks the delay of each of these paths towards the IP endpoint. The feature introduces these changes: CLI:
YANG Data Model:
(See GitHub, YANG Data Models Navigator) |
|
|
You can now improve the user experience, understand the features and functionalities supported by neighboring routers, reduce operational work hours and human errors by gaining better visibility into the routing capabilities of directly connected neighboring routers in an OSPF network. These improvements are now possible when you enable Segment Routing on a neighboring connected router. Previously, there was no straightforward method to display the segment routing and other capabilities of neighboring routers in an OSPF network. The feature introduces these changes: CLI:
YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
|
In Segment Routing over an IPv6 network (SRv6), you can keep track of the operational status of both the forward and reverse paths of a particular node or IP endpoint. You can use this information for troubleshooting, network maintenance, and optimizing network performance. Additionally, you can use flow labels to verify the liveness of each subsequent hop path toward the IP endpoint of that path. So that, when network traffic is distributed across multiple available paths towards an IP endpoint, liveness detection tracks the operational status of each of these paths towards the IP endpoint. The feature introduces these changes: CLI:
YANG Data Model:
(see GitHub, YANG Data Models Navigator) |
|
|
MPLS OAM support for SR-TE Policies using MPLS IPv6-based LSPs |
You can now verify the network configuration and paths and SR-TE policies set up, without interrupting or potentially disrupting live network traffic, for SR-MPLS (Segment Routing over Multiprotocol Label Switching) IPv6-based Label Switched Paths (LSPs). Previously, MPLS OAM support was only for IPv4-based LSPs. The feature introduces these changes: CLI: The traceroute sr-mpls and ping sr-mpls commands are extended to support IPv6 nexthop addresses. YANG Data Models:
See (GitHub, Yang Data Models Navigator) |
|
You can save IP addresses and resources, prevent the use of multiple node SIDs for labels associated with loopback interfaces, and save time configuring multiple loopback interfaces for an Area Border Router (ABR) in a network. These improvements are possible as you can now configure a single loopback interface for multiple areas. With this feature, an ABR can use a single loopback interface for all areas it connects to, eliminating the need for separate loopback interfaces for each area. Previously, each loopback interface was linked to only one area. The feature introduces these changes: CLI: The multi-area-interface command is extended to support loopback interfaces. |
|
|
This feature enables you to configure the traffic-class DSCP marking to 6-bits using the newpolicy-map-extend keyword in the hw-module profile segment-routing srv6 mode microsegment f3216 encapsulation traffic-class CLI in both the L2 and L3 traffic configurations for SRv6. This is a mutually inclusive feature for L2 and L3 traffic. Therefore, this feature cannot be used in the individual configuration for L2 and L3 traffic. When you use the policy-map-extend keyword in the hw-module profile segment-routing srv6 mode microsegment f3216 encapsulation traffic-class CLI, the existing 3-bit DSCP marking set by the hw-module profile segment-routing srv6 mode microsegment f3216 encapsulation traffic-class l3-traffic policy-map CLI in the L3 traffic configuration is modified to 6-bits. This feature introduces this change: CLI: The policy-map-extend keyword is introduced in the hw-module profile segment-routing srv6 mode microsegment f3216 encapsulation traffic-class command. |
|
|
You can now minimize ECMP-FEC resource consumption and duplication of resources during underlay programming for an SR-MPLS network for IPv6 prefixes. The feature supports sharing the same ECMP-FEC, regular FEC, and Egress Encapsulation DB (EEDB) entries for all paths with the same outgoing MPLS label among IPv6 prefixes. This improvement is now possible by using the hw-module fib mpls label lsr-optimized command. In earlier releases, ECMP-FEC optimization for IPv4 prefixes was available. |
|
|
This feature adds support for user-defined generic metric as a metric type for IS-IS Flexible Algorithm. You can now have more control over traffic flows using user-defined generic metrics. You can define a family of user-defined generic metrics that can advertise different types of administrative metrics such as jitter, reliability, and fiscal cost depending on the traffic class for Flexible Algorithms. You can selectively define and assign semantics of these metrics as per the network requirement. The feature introduces the following changes: CLI:
YANG Data Models:
|
|
|
L3VPN |
|
|
You can now verify that MPLS labels are correctly programmed in the control plane (or software) and the data plane (hardware forwarding tables) using the show mpls forwarding labels command. Previously the command only showed the MPLS label information for software, additional steps were required to verify the label status in the hardware, by checking in the SDK. |
|
|
Netflow |
|
|
You can now export GTP-U traffic flow records using NetFlow v9 and IPFIX in 5G network. This enables you to monitor provides you with bidirectional traffic monitoring crucial for analytics and robust DDoS prevention strategies. This feature modifies the output of the show flow monitor command. |
|
|
Network Synchronization |
|
|
This feature allows the exclusion of Foreign Masters (FMs) with unstable timing from Best Master Clock Algorithm (BMCA). It enables the detection of clocks that are unusable due to Packet Timing Signal Fail (PTSF) and keeps them under surveillance for any timing stabilization. Once improvements are observed, these clocks can be reassessed and potentially reinstated as viable sources. The system's reliability is improved by regularly checking all Frequency Managers (FMs) for their Precision Time Protocol (PTP) timing accuracy, including those that are currently not selected. This allows for dynamic selection of time sources, which in turn improves service delivery and strengthens the resilience of the synchronization infrastructure.. This feature introduces these changes: CLI:
|
|
|
Delay Request-Response Mechanism for Passive Ports and PTP Phase Difference Alarm Triggering |
You can now enable the participation of passive ports in the Delay Request-Response Mechanism (DRRM), thus ensuring that in case the phase difference readings exceed the allowed threshold then syslogs are displayed. This feature enables you to detect potential errors such as fiber asymmetry or a clock failure in the PTP network by measuring the phase difference between passive port and secondary port. This feature introduces these changes: CLI:
YANG Data Models: The following data models are enhanced:
|
|
System Management |
|
|
Advanced Network Latency Insights through Frame Delay Categorization |
By precisely measuring the frame delay range into widths, bins, minimum-delay and range percentile, you can now get a clearer picture of network speeds by sorting delays into groups. This helps make sure data flows smoothly and problems are found and fixed faster. Plus, it allows users to check if most data gets through the network quickly, making the network more reliable for everyone. This feature introduces these changes: CLI: frame delay width bins minimum-delay frame-delay-range percentileYang Data Models:
|
|
Using the default encapsulation setting for Service Activation Tests (SAT) streamlines the activation process with its ease of configuration and uniform testing standards. It accelerates service rollout by diminishing the need for intricate adjustments and guarantees the consistency of test outcomes. This setting establishes a dependable benchmark for assessing performance, benefits from extensive vendor support, and ensures seamless interaction between diverse network elements, aiding in the efficient deployment and ongoing management of network services. |
|
|
User-Specified MTU Support for EMIX Traffic in Service Activation Tests |
Defining the MTU packet size in Service Activation Tests (SAT) allows for tailored testing that matches the network's maximum frame capacity. This precision testing ensures accurate service performance validation and a reliable network service rollout. This feature introduces the following changes: CLI: packet-size emix Sequence h |
|
System Security |
|
|
Support for Layer 2 Untagged Sub-interface configuration in IEEE 802.1X Port-based Authentication |
This feature allows you to configure the Layer 2 untagged sub-interfaces in the IEEE 802.1X port-based authentication. |
|
System Monitoring |
|
|
We help you save debugging time to locate packet drops by automatically detecting nonzero traffic drops from the commands running in the background and giving you the exact location of the packet drop. In earlier releases, you used multiple show commands with their respective locations to detect packet drops. This feature introduces the show drops all command. |
|
|
System Setup |
|
|
Installing Owner and Partner RPMs Using IOS XR Install Infrastructure |
In previous releases, the Owner and Partner applications could not be installed via the same install infrastructure as the rest of the IOS XR software. Instead, you had to install these applications via the Application Manager interface. Starting this release, you can use the existing IOS XR install infrastructure to install your proprietary Owner and Partner RPMs. This enhancement streamlines the process for integrating third-party software seamlessly into the IOS XR environment, including bundling the owner and partner RPMs into a GISO. This feature introduces the keyword skip-implicit-owner-packages-checks in the following install commands:
|
The following feature is supported on N540-6Z14S-SYS-D, N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants.
| Feature | Feature |
|---|---|
|
Modular QoS |
|
|
Increase in Number of Ingress QoS Policies Supported on Layer 2 |
Layer 2 Virtual Private Network (L2VPN) now supports increase in number of ingress QoS policies on all the class-map sizes. Now you can attach the additional QoS policies to the interfaces, to manage, prioritize, and control the flow of traffic at ingress. This feature is supported on the following Cisco NCS 540 router variants:
To enable the increased ingress QoS policies on all the class-map sizes in Layer 2, this feature introdces the following new command: |
The following feature is supported only on N540-24Q8L2DD-SYS router variant.
| Feature | Description |
|---|---|
|
Interface and Hardware Component |
|
|
An 8x25G breakout interface allows you to split the 400G high-density ports into multiple lower-density ports. You can now configure 8x25G breakout ports using the optics QDD-2X100-SR4-S. Breakout port is supported on the following Cisco NCS 540 router variant:
|
|
YANG Data Models Introduced and Enhanced
This release introduces or enhances the following data models. For detailed information about the supported and unsupported
sensor paths of all the data models, see the Github repository. To get a comprehensive list of the data models supported in a release, navigate to the Available-Content.md file
for the release in the Github repository. The unsupported sensor paths are documented as deviations. For example, openconfig-acl.yangprovides details about the supported sensor paths, whereas cisco-xr-openconfig-acl-deviations.yang provides the unsupported sensor paths for openconfig-acl.yang on Cisco IOS XR routers.
You can also view the data model definitions using the YANG Data Models Navigator tool. This GUI-based and easy-to-use tool helps you explore the nuances of the data model and view the dependencies between various containers in the model. You can view the list of models supported across Cisco IOS XR releases and platforms, locate a specific model, view the containers and their respective lists, leaves, and leaf lists presented visually in a tree structure.
To get started with using data models, see the Programmability Configuration Guide for Cisco NCS 540 Series Routers.
| Feature | Description |
|---|---|
|
Programmability |
|
|
openconfig-local-routing.yang Version 2.0.1 |
The OpenConfig data model, which is part of the openconfig-network-instance.yang data model is revised from version 1.2.0 to 2.0.1. This revision enables you to configure the preference for the order selection when multiple sources, such as protocols and static routes, contribute to the same prefix entry. A lower number signifies a better preference. When the preference value is not specified, default preference value is considered which is one. This data model supports event-driven and Model-driven telemetry. |
|
openconfig-sflow.yang Version 1.0.0 |
This OpenConfig data model is enhanced to support:
This data model supports event-driven and Model-driven telemetry. |
|
Cisco-IOS-XR-infra-statsd-oper.yang |
The native yang data model streams cached counters using a TARGET_DEFINED subscription. It enables you to fetch interface statistics, such as bytes-received, packets-received and other details, from a cache which is periodically updated from hardware using generic-counters container. The hardware-timestamp field indicates the timestamp of the most recent hardware counter readings. If hardware-timestamp field is 0, the last-data-time field indicates the timestamp of the most recent counter readings, which could be either from hardware or software. |
|
openconfig-if-ip.yang Version 3.5.0 |
The OpenConfig data model has been updated from version 3.0.0 to 3.5.0. This data model helps you specify data structures for managing both configuration and operational state on IP interfaces, supporting IPv4 and IPv6. You can stream telemetry for the operational state of these interfaces using both model-driven and event-driven approaches. |
|
Cisco-IOS-XR-ipv4-ospf-oper.yang |
This native data model is enhanced with new leaves sr-capable, ri-capabilities-tlv, te-capable, gr-capable, grh-capable, and host-name in the OSPF-SH-NEIGHBOR-DETAIL and OSPF-SH-NEIGHBOR groupings to display neighbor router capabilities in OSPF networks. |
|
Cisco-IOS-XR-evpn-oper.yang |
This native data model is enhanced to stream event-driven telemetry (EDT) data for the operational state of Layer 2 Ethernet VPN (EVPN) MAC routes using mac container. EDT data is streamed when an on-change event on the MAC route is detected such as adding, deleting or modifying a MAC address. |
|
Cisco-IOS-XR-mpls-traceroute-act.yang |
This unified data model is enhanced with a new container, ipv6, and leaves such as next-hop, lsp-endpoint, and force-ipv6-explicit-null in the type-ipv6-next-hop interface to extend support to Segment Routing OAM to verify network configuration for SR-MPLS IPv6-based LSPs. |
|
Cisco-IOS-XR-um-router-isis-cfg |
This unified data model is enhanced with new containers generic-metric, and generic-metric-level to define a family of user-defined generic metrics that can advertise different types of administrative metrics such as jitter, reliability, and fiscal cost depending on the traffic class for Flexible Algorithms. |
Hardware Introduced
 Note |
Before you install the Cisco router, you must prepare your site for the installation, for more details on site planning and environmental requirements, see Hardware Installation Guide. |
|
Hardware |
Description |
|---|---|
|
Optics |
This release launches the following new optics on selective hardware within the product portfolio. For details and other new supported transceivers, refer to the Transceiver Module Group (TMG) Compatibility Matrix.
|
Behavior Changes
-
From this release, the default order of authentication methods for SSH clients on Cisco IOS XR routers running Cisco IOS XR SSH is changed to: public-key, keyboard-interactive, and password.
Prior to this release, the default order was: public-key, password, and keyboard-interactive.
-
Cisco Secure DDoS Edge Protection is supported from Cisco IOS XR Release 7.10.1 on Cisco NCS 540 series routers. But the smart licensing usage and utilization reporting for the edge protection feature remains disabled. Usage details of the edge protection functionality will be enabled only in the future release. Hence, the Smart Account In Use utilization report for edge protection will show as 0 (zero) consumed.
-
Prior to Cisco IOS XR Release 7.2.1, a segment of an explicit segment list can be configured as an IPv4 address (representing a Node or a Link) using the index indexaddress ipv4 address command.
Starting with Cisco IOS XR Release 7.2.1, an IPv4-based segment (representing a Node or a Link) can also be configured with the new index index mpls adjacencyaddress command. The configuration is stored in NVRAM in the same CLI format used to create it. There is no conversion from the old CLI to the new CLI.
Starting with Cisco IOS XR Release 7.9.1, the old CLI has been deprecated. Old configurations stored in NVRAM will be rejected at boot-up.
As a result, explicit segment lists with IPv4-based segments using the old CLI must be re-configured using the new CLI.
There are no CLI changes for segments configured as MPLS labels using the index index mpls label label command.
-
If you are on a release before Cisco IOS XR Release 7.4.1, you can configure SR-ODN with Flexible Algorithm constraints using the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command.
Starting with Cisco IOS XR Release 7.4.1, you can also configure SR-ODN with Flexible Algorithm constraints using the new segment-routing traffic-eng on-demand color color constraints segments sid-algorithm algorithm-number command.
From Cisco IOS XR Release 7.9.1, the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command is deprecated. Previous configurations stored in NVRAM will be rejected at boot-up.
Hence, for Cisco IOS XR Release 7.9.1, you must reconfigure all SR-ODN configurations with Flexible Algorithm constraints that use the on-demand dynamic sid-algorithm with the on-demand constraints command.
Restrictions and Limitations on the Cisco NCS 540 Series Router
-
The statistics collection may time out due to CPU overload during route churn. In such scenarios, statistics collection will resume when the CPU becomes available after the route churn is complete.
-
Autonegotiation is disabled by default on the fixed GigE - 0/0/0/0 - 0/0/0/4 copper ports of N540X-16Z4G8Q2C-A/D and N540X-12Z16G-SYS-A/D router variants. To enable autonegotiation, use the negotiation auto command.
-
If you’re migrating from previous XR versions, then you must enable autonegotiation for fixed copper ports using the negotiation auto command before performing the software upgrade to avoid any links going down.
-
Enabling or disabling frame preemption on the Time Sensitive Networking (TSN) port results in traffic drop for N540-FH-CSR-SYS. The port Twenty Five G0/0/12 is used as the TSN port.
-
Fabric multicast queue stats are not supported in N540X-8Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
-
Unlabeled BGP PIC EDGE for global prefixes is not supported.
-
The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.
-
The hw-module profile mfib statistics command is not supported.
Caveats
There are no caveats in this release.
IOS XR Base Images and Optional Packages
For more information on system setup and software installation process, see System Setup and Software Installation Guide for Cisco NCS 540 Series Routers.
For general and ordering information see:
-
Cisco Network Convergence System 540 Fronthaul Routers Data Sheet
-
Cisco Network Convergence System 540 Large Density Router Data Sheet
-
Cisco Network Convergence System 540 Medium Density Routers Data Sheet
-
Cisco Network Convergence System 540 Small Density Router Data Sheet
To install the Cisco NCS 540 Series Routers, see Cisco NCS 540 Router Hardware Installation Guide.
Release 24.2.1 Software
The following tables list the supported base images and optional packages and their corresponding file names.
-
The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.
-
The second table lists the supported software for N540-24Q8L2DD-SYS, N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, N540X-16Z8Q2C-D and N540-FH-AGG-SYS variants.
-
The third table lists the supported software for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants.
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540-mini-x-24.2.1.iso |
IOS XR mandatory base image. |
|
USB Boot Package |
ncs540-usb_boot-24.2.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Manageability |
ncs540-mgbl-1.0.0.0-r2421.x86_64.rpm |
Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server |
|
IOS XR MPLS |
ncs540-mpls-1.0.0.0-r2421.x86_64.rpm ncs540-mpls-te-rsvp-1.0.0.0-r2421.x86_64.rpm |
Supports MPLS and MPLS Traffic Engineering (MPLS-TE) |
|
IOS XR Security |
ncs540-k9sec-1.0.0.0-r2421.x86_64.rpm |
Supports MACsec and 802.1X |
|
IOS XR ISIS |
ncs540-isis-1.0.0.0-r2421.x86_64.rpm |
Supports ISIS |
|
IOS XR OSPF |
ncs540-ospf-1.0.0.0-r2421.x86_64.rpm |
Supports OSPF |
|
IOS XR Lawful Intercept |
ncs540-li-1.0.0.0-r2421.x86_64.rpm |
Supports Lawful Intercept (LI) |
|
IOS XR Multicast |
ncs540-mcast-1.0.0.0-r2421.x86_64.rpm |
Supports Multicast |
|
IOS XR EIGRP |
ncs540-eigrp-1.0.0.0-r2421.x86_64.rpm |
Supports EIGRP |
|
IOS XR LI-CTRL |
ncs540-lictrl-1.0.0.0-r2421.x86_64.rpm |
Supports LI-CTRL |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-x64-24.2.1.iso |
IOS XR base image with mandatory packages. The base ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-iosxr-24.2.1.tar. |
|
USB Boot Package |
ncs540l-usb_boot-24.2.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-iosxr-24.2.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-iosxr-24.2.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-iosxr-24.2.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-k9sec-rpms.24.2.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-iosxr-24.2.1.tar |
Supports RIP |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-aarch64-24.2.1.iso |
IOS XR base image with mandatory packages. The ISO image also includes the following optional packages:
These optional packages are also included in NCS540l aarch64 iosxr optional rpms-24.2.1.tar. |
|
USB Boot Package |
ncs540l-aarch64-usb_boot-24.2.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-aarch64-iosxr-optional-rpms-24.2.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-aarch64-iosxr-optional-rpms-24.2.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-aarch64-iosxr-optional-rpms-24.2.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-aarch64-k9sec-rpms.24.2.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-aarch64-iosxr-optional-rpms-24.2.1.tar |
Supports RIP |
Determine Software Version
Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 24.2.1
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : swtools
Built On : Tue Jun 11 09:05:57 PDT 2024
Built Host : iox-lnx-066
Workspace : /auto/srcarchive11/prod/24.2.1/ncs540/ws
Version : 24.2.1
Location : /opt/cisco/XR/packages/
Label : 24.2.1
cisco NCS-540 () processor
System uptime is 8 hours 59 minutes
Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 24.2.1 LNT
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Tue Jun 11 13:58:26 UTC 2024
Build Host : iox-ucs-056
Workspace : /auto/srcarchive11/prod/24.2.1/ncs540l/ws/
Version : 24.2.1
Label : 24.2.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540X-16Z4G8Q2C-A (C3708 @ 1.70GHz) processor with 8GB of memory
EG-PE41 uptime is 9 hours, 3 minutes
Cisco NCS 540 System with 16x10G+4x1GCu+8x25G+2x100G DC
Log in to the router and enter the show version command on the N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-6Z18G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 24.2.1 LNT
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Tue Jun 11 13:58:26 UTC 2024
Build Host : iox-ucs-059
Workspace : /auto/srcarchive11/prod/24.2.1/ncs540l-aarch64/ws/
Version : 24.2.1
Label : 24.2.1
cisco NCS540L
cisco N540X-6Z18G-SYS-A processor with 8GB of memory
PE5_540L uptime is 17 hours, 6 minutes
Cisco NCS 540 Series Fixed Router 18x1G, 6x1/10G, AC
Log in to the router and enter the show version command on the N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 24.2.1 LNT
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Tue Jun 11 13:58:26 UTC 2024
Build Host : iox-ucs-056
Workspace : /auto/srcarchive11/prod/24.2.1/ncs540l/ws/
Version : 24.2.1
Label : 24.2.1
cisco NCS540L (D1519 @ 1.50GHz)
cisco N540-24Q8L2DD-SYS (D1519 @ 1.50GHz) processor with 16GB of memory
Arches-PE42 uptime is 9 hours, 24 minutes
Cisco NCS540 Series, Fixed Router 2x400G, 8x50G, 24x25G Chassis
Log in to the router and enter the show version command on the N540-FH-AGG-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 24.2.1 LNT
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : sajshah
Built On : Wed Jun 12 00:04:09 UTC 2024
Build Host : iox-ucs-054
Workspace : /auto/ioxdepot6/GISO/giso_build_lindt/giso_custom_create/kalaisel_2024-06-12_07-01-59_UTC
Version : 24.2.1
Label : 24.2.1-iso
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-FH-AGG-SYS (C3708 @ 1.70GHz) processor with 8GB of memory
LION_PE1 uptime is 9 hours, 16 minutes
Cisco NCS 540 FH System with 24xCPRI/25G/10G/TSN+4x100G
Determine Firmware Support
Use the show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be “CURRENT”; Running and Programed version must be the same. The Golden FPDs with “NEED UPGD” can be ignored, the Golden FPDs are not upgradable.
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:
Note |
If the Req Reload field is mentioned as Yes in the output, then it indicates the need for a router reboot for the FPD's latest version to take effect. |
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M Bootloader(A) YES 1.17 1.17 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.28 0.28 0.0
MB-MIFPGA YES 0.08 0.08 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M1100(A) NO 50.00 50.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540-ACC-SYS Bootloader(A) YES 1.17 1.17 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.28 0.28 0.0
MB-MIFPGA YES 0.08 0.08 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M1100(A) NO 50.00 50.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LIT-PriMCU-ACFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-ACFW(A) NO 0.07 0.07 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LIT-PriMCU-DCFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-DCFW(A) NO 0.06 0.06 0.0
SDG-PriMCU-DCFW(A) NO 1.03 1.03 0.0
SDG-SecMCU-DCFW(A) NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-X-24Z8Q2C-M Bootloader(A) YES 1.17 1.17 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.28 0.28 0.0
MB-MIFPGA YES 0.08 0.08 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M1100(A) NO 50.00 50.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS Bootloader(A) YES 1.17 1.17 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.28 0.28 0.0
MB-MIFPGA YES 0.08 0.08 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M1100(A) NO 50.00 50.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Disabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/RP0 N540-24Z8Q2C-M 1.0 MB-MIFPGA CURRENT 0.08 0.08
0/RP0 N540-24Z8Q2C-M 1.0 Bootloader CURRENT 1.17 1.17
0/RP0 N540-24Z8Q2C-M 1.0 CPU-IOFPGA CURRENT 0.10 0.10
0/RP0 N540-24Z8Q2C-M 1.0 MB-IOFPGA CURRENT 0.28 0.28
0/RP0 N540-24Z8Q2C-M 1.0 SATA-M500IT-MU-B CURRENT 4.00 4.00
0/PM0 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.04 0.04
0/PM0 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.07 0.07
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 ADM_FW CURRENT 14.03 14.03 NOT REQ
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 ADMConfig CURRENT 1.05 1.05 NOT REQ
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpga CURRENT 3.08 3.08 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpgaGolden B CURRENT 2.03 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 Primary-BIOS SA CURRENT 1.49 1.49 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpga S CURRENT 0.50 0.50 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpgaGolden BS CURRENT 0.50 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFw S CURRENT 4.13 4.13 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFwGolden BS CURRENT 4.13 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-8Z16G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-6Z14S-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-A ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.08 0.08 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.08 0.08 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 ADMConfig CURRENT 5.00 5.00 NOT REQ
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 IoFpgaGolden B CURRENT 0.15 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 Prim-BootLoader A CURRENT 20.08 20.08 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 StdbyFpga S CURRENT 2.05 2.05 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 StdbyFpgaGolden BS CURRENT 0.32 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 ADM-DBConfig CURRENT 2.05 2.05 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 ADM-MBConfig CURRENT 2.05 2.05 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 IoFpgaGolden B CURRENT 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 Primary-BIOS S CURRENT 4.07 4.07 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 SsdSAMSA64G3 S CURRENT 12.41 12.41 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 StdbyFpga S CURRENT 2.59 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 StdbyFpgaGolden BS CURRENT 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-FH-AGG-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
JMAC1-Config YES 3.00 3.00 0.0
JMAC2-Config YES 3.00 3.00 0.0
JMAC3-Config YES 3.00 3.00 0.0
JMAC4-Config YES 3.00 3.00 0.0
JMAC5-Config YES 3.00 3.00 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.49 1.49 0.0
StdbyFpga YES 0.50 0.50 0.0
StdbyFpgaGolden YES 0.50 0.40 0.0
TamFw YES 4.13 4.13 0.0
TamFwGolden YES 4.13 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 ADM1_Config CURRENT 1.02 1.02 NOT REQ
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 ADM2_Config CURRENT 1.02 1.02 NOT REQ
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 DpFpgaCpri CURRENT 0.24 0.24 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 DpFpgaEth CURRENT 1.22 1.22 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 IoFpga CURRENT 1.30 1.30 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 IoFPgaGolden B CURRENT 1.20 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 Primary-BIOS SA CURRENT 1.49 1.49 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 StdbyFpga S CURRENT 0.46 0.46 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 StdbyFpgaGolden BS CURRENT 0.35 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 TamFwGolden BS CURRENT 6.04 0/RP0
0/PM0 N540-PWR750-A 1.0 EM-PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM0 N540-PWR750-A 1.0 EM-SecMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 N540-PWR750-A 1.0 EM-PrimMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 N540-PWR750-A 1.0 EM-SecMCU CURRENT 1.03 1.03 NOT REQ
Important Notes
Licensing
Starting with Cisco IOS XR Release 24.1.1, Smart Licensing Using Policy (SLP) is the default Licensing model. When you upgrade to the Cisco IOS XR Release 24.1.1 release or later, the Smart Licensing Using Policy is enabled by default.
You can migrate your devices to Smart Licensing with Policy model, see Migrating from Smart Licensing to Smart Licensing Using Policy, Smart Licensing Using Policy on Cisco IOS XR Routers.
We recommend that you update to the latest version of SSM On-Prem or Cisco Smart Licensing Utility.
Note |
SSM On-Prem and CSSM both support SLP devices and SL devices. SLP devices and SL devices can coexist in a network. The Smart Licensing (SL) model is available in releases Cisco IOS XR Release 7.11.1 and earlier. |
Supported Transceiver Modules
For more information on the supported transceiver modules, see Transceiver Module Group (TMG) Compatibility Matrix. In the Begin your Search search box, enter the keyword NCS540 and click Enter.
Upgrading Cisco IOS XR Software
Note |
For software installation and upgrades, refer to the respective upgrade/downgrade docs .tar files based on your 540 router varaint. |
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.
The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-24.2.1.tar file.
The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-24Q8L2DD-SYS, N540-FH-AGG-SYS, N540X-16Z8Q2C-D, and N540-FH-CSR-SYS variants is available along with the software image in NCS540l-docs-24.2.1.tar file.
The upgrade document for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants is available along with the software image in NCS540l-aarch64-docs-24.2.1.tar file.
Note |
Quad configurations will be lost when you perform a software downgrade on Cisco NCS 540 Routers that support quad configurations from IOS XR Release 7.5.1 onwards to a release prior to IOS XR Release 7.5.1 due to a non-backward compatibility change. The lost configuration can be applied manually after the downgrade. |
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco NCS 540 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs-540-series-routers.html
Feedback