Network Convergence System 540 Series Routers


Note


This software release has reached end-of-life status. For more information, see the End-of-Life and End-of-Sale Notices.



Note


Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.

  • Use faceted search to locate content that is most relevant to you.

  • Create customized PDFs for ready reference.

  • Benefit from context-based recommendations.

Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience.

Do provide feedback about your experience with the Content Hub.



Note


Cisco IOS XR Release 7.3.2 is an Extended Maintenance Release of Cisco IOS XR Release 7.3.1 for Cisco NCS 540 Series routers. For more details on the Cisco IOS XR release model and associated support, see Guidelines for Cisco IOS XR Software.


What's New in Cisco IOS XR Release 7.3.2

Feature Description

Hardware

Support for Cisco Network Convergence System 540 Fronthaul Routers

The Cisco NCS 540 Fronthaul 1RU routers extend Cisco's mobile xHaul solution.

The Cisco N540-FH-CSR-SYS router has the following network interfaces:

  • 8 x Common Public Radio Interface (CPRI) (Option 3-8)

  • 4 x 1G/10G Ethernet or CPRI (Option 3-8)

  • 2 x 10G/25G TSN

  • 8 x 1G/10G

  • 4 x 1G/10G/25G

  • 2 x 100G

The Cisco N540-FH-AGG-SYS router has the following network interfaces:

  • 24 x 1G/10G/25G or 10G/25G TSN or CPRI (Option 3-8)

  • 4 x 100G


Note


Cisco N540-24Q8L2DD-SYS and N540X-4Z14G2Q-A/D routers are not supported in Cisco IOS XR Release 7.3.2.

The following features are supported only on N540-FH-CSR-SYS and N540-FH-AGG-SYS variants.

Feature Description

L2VPN

EVPN-VPWS support to RoE interface

This feature extends support in carrying the Radio over Ethernet (RoE) packets from Cell Site Router (CSR) to the aggregation router.

Modular QoS

Low Latency Queuing for Specific QoS Flows

This feature allows you to configure low latency or priority for specific QoS flows at the class-level within a policy map. It enables delay-sensitive data to be prioritized and transmitted before other packets in other queues.

The following features are supported only on N540-28Z4C-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-12Z20G-SYS-A/D, and N540X-12Z16G-SYS-A/D variants.

Feature Description

System Security

CiscoSSH

This release introduces CiscoSSH, a newer implementation of SSH on NCS 540 Small Density, NCS 540 Large Density, NCS 540 Medium Density (except N540-ACC-SYS, NC540X-ACC-SYS, N540-24Z8Q2C-SYS variants).

CiscoSSH leverages OpenSSH implementation, by using the Linux TCP/IP stack to transmit and receive SSH packets over the management Ethernet interface and line card interfaces on the router. CiscoSSH provides additional security features like FIPS compliance and X.509 digital certification. It supports packet path features like MPP, ACL and VRF support, and ensures interoperability with various existing SSH implementations.

Note

 

Cisco IOS XR SSH, the SSH implementation that existed prior to this release, is now deprecated on all variants of NCS 540 except for N540-ACC-SYS, NC540X-ACC-SYS, N540-24Z8Q2C-SYS.

System Setup

ZTP over Layer 2

Previously available over Layer 3, this feature is now available to auto-provision your routers and DHCP devices on Layer 2 networks.

This functionality is essential because many service provider topologies have services configured for various Layer 2 VLAN tags, requiring cost-effective and reliable provisioning.

The following features are supported only on N540-ACC-SYS, N540X-ACC-SYS, N540-24Z8Q2C-SYS, N540-28Z4C-SYS, N540-28Z4C-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.

Feature Description

System Security

Graceful Termination of SSH Sessions

This functionality gracefully terminates the active SSH sessions on the router by returning a successful exit code (0) to the SSH client. This functionality is mainly helpful for automation scenarios such as image installation on a router initiated by a client through an SSH session, where the router reloads automatically post-upgrade. This functionality existed earlier with Cisco IOS XR SSH and is now getting introduced with CiscoSSH.

Without this functionality, the SSH sessions terminated abruptly by returning a failure error code (255) to the SSH client, causing the automation scripts to fail.

The new functionality is applicable only for upgrade and router reload scenarios; not for RP failovers and active RP reload scenarios.

SSH Port Forwarding

With this feature enabled, the SSH client on a local host forwards the traffic coming on a given port to the specified host and port on a remote server, through an encrypted SSH channel. Legacy applications that do not otherwise support data encryption can leverage this functionality to ensure network security and confidentiality to the traffic that is sent to remote application servers.

This feature introduces the ssh server port-forwarding local command.

Note

 

For the following Cisco NCS 540 router variants, this feature is supported with Cisco IOS XR SSH:

  • N540-ACC-SYS

  • N540X-ACC-SYS (Premium)

  • N540-24Z8Q2C-SYS

For all other Cisco NCS 540 router variants, this feature is supported with CiscoSSH, an OpenSSH-based implementation of SSH.

Programmability

Cisco IOS XR mpls-ping-act and Cisco IOS XR mpls-traceroute-act YANG data model

This feature introduces the Cisco-IOS-XR-mpls-ping-act and Cisco-IOS-XR-mpls-traceroute-act YANG data models to accommodate OAM RPCs for MPLS and SR-MPLS.

You can access these Cisco IOS XR native data models from the Github repository.

Routing

Fast Path - Graceful Conflict Identification or Resolution for Encapsulation-ID

BGP

BGP PIC: Export of Backup Path Agnostic to its Multipath Eligibility

Prior to this release, you could only import the backup paths of a prefix to the respective VRFs only when the backup paths are multipath eligible. For backup paths to be multipath eligible, all the following attributes in the backup paths must be the same: weight, local preference, autonomous system path, origin code, Multi Exit Discriminator (MED), and Interior Gateway Protocol (iGP) distance. Also, the next hop router for each multipath must be different. This feature introduces flexibility to allow the import of backup paths to the VRF even if the said attributes are not the same.

Segment Routing

Dual-Stack L3VPNServices (IPv4, IPv6) (SRv6 Micro-SID)

This feature introduces support for Dual-stack (VPNv4/VPNv6) VRFs. VPNv4/VPNv6 Dual-stack supports both IPv4 (uDT4) and IPv6 (uDT6) based SRv6 L3VPN service on the same interface, sub-interface, or VRF.

SRv6 Services: EVPN VPWS—All-Active Multi-Homing (SRv6 Micro SID)

This feature provides an ELINE (P2P) service with all-active multihoming capability over an SRv6 network.

All-Active Multi-Homing enables an operator to connect a customer edge (CE) device to two or more provider edge (PE) devices to provide load balancing and redundant connectivity. With All-Active Multi-Homing, all the PEs can forward traffic to and from the multi-homed device.

BGP-LU Inter-AS Option-C Interworking with LDP and IGP SR-MPLS using Proxy BGP-SR

This feature extends the current Proxy BGP-SR functionality by allowing the BGP-LU ASBR router with Proxy BGP-SR configured to also interconnect attached LDP domains.

The Proxy BGP-SR feature allows interconnection of IGP SR-MPLS domains and legacy domains via BGP-LU Inter-AS option-C. It provides a prefix-to-SID mapping for BGP-LU prefixes that are learned without a Prefix-SID.

SR-TE BGP Soft Next-Hop Validation For ODN Policies

This feature addresses BGP Next-Hop reachability issues through BGP Next-Hop soft validation, and also enhances BGP best path selection.

  • nexthop validation color-extcomm disable

  • nexthop validation color-extcomm sr-policy

  • bgp bestpath igp-metric sr-policy

SR-TE PCE Groups

This feature allows an SR policy to be delegated to a set of PCE servers configured under a PCE group. Multiple PCE groups can be configured to allow SR policies on the same head-end to be delegated to different sets of PCEs.

With this functionality, an operator can designate sets of PCEs for various purposes, such as PCE-per-service-type or PCE-per-wholesale-customers.

Autoroute Include

This feature allows you to steer specific IGP (IS-IS, OSPF) prefixes, or all prefixes, over non-shortest paths and to divert the traffic for those prefixes on to an SR-TE policy.

SR-PCE: North-Bound API for SRv6 and Flexible Algorithm in Cisco Optimization Engine (COE) v3.0 release

The SR-PCE provides a north-bound HTTP-based API to allow communication between SR-PCE and external clients and applications. The Cisco Crosswork Optimization Engine is an application that leverages the SR-PCE.

This release adds support for the following:

  • Reporting of Flexible Algorithm participation and definitions

  • SRv6 topology information (nodes, links, Node uSIDs and Adj uSIDs)

  • SRv6 uSID list and uB6 SIDs allocated for a policy

For more information, refer to the Cisco Crosswork Optimization Engine User Guides.

IP Endpoint Delay Measurement and Liveness Monitoring

This feature measures the end-to-end delay and monitors liveness of a specified IP endpoint node, including VRF-aware (awareness of multiple customers belonging to different VRFs).

This feature is supported on IPv4, IPv6, and MPLS data planes.

OSPF: Microloop Avoidance for Flexible Algorithm

This feature extends the current OSPF Flexible Algorithm functionality to support Microloop Avoidance.

SRv6TE Phase1: PCC/PCE (PCEPv6) uSID Introduction - PCE Delegated, Constraints: Disjoint, affinity, Metric: IGP, TE, Latency, L3 Services ODN/AS

This feature brings the Segment Routing Traffic Engineering features to the SRv6 data plane.

This release supports the following features:

  • SRv6-TE with SRv6 micro-SIDs (uSIDs)

  • SRv6 policies

  • Manual SRv6 policies

  • On-Demand SRv6 policies - SR On-Demand Next-Hop (SR-ODN)

  • Automated steering for Layer 3-based BGP services (IPv4 L3VPN, IPv6 L3VPN, IPv4 BGP global, IPv6 BGP global)

  • SRv6-aware Path Computation Element (PCE)

  • PCEPv6

  • Path computation optimization objectives (TE, IGP, latency)

  • Path computation constraints (affinity, disjointness)

Behavior Change Introduced in This Release


Note


The crypto fips-mode isn’t supported on the following Cisco NCS 540 router variants:

  • N540X-6Z18G-SYS-A

  • N540X-6Z18G-SYS-D

  • N540X-8Z16G-SYS-A

  • N540X-8Z16G-SYS-D



Note


Cisco IOS XR Release 7.3.2 introduces dual-rate optics support for N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants. If you use an optical transceiver, you must configure the interface speed to correctly match with the required transceivers speed.


Restrictions and Limitations on the Cisco NCS 540 Series Router

  • FMQ stats are not supported in N540X-8Z16G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants.

  • Unlabeled BGP PIC EDGE for global prefixes is not supported.

  • The show inventory and the show diagnostic commands do not display the fan serial number.

  • The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.

  • The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.

  • Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.

  • The hw-module profile mfib statistics command is not supported.

Caveats

This section describes open and resolved severity 1 and 2 caveats and select severity 3 caveats:

  • The “Open Caveats” sections list open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.

  • The “Resolved Caveats” sections list caveats resolved in a specific release, but open in previous releases.

The bug IDs are sorted alphanumerically.


Note


The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug Search Tool.


Cisco IOS XR Caveats Release 7.3.2

Caveat ID Number

Description

CSCvy13197

Telemetry Syslog events are not received by telemetry client.

Bug Search Tool

Use the Cisco Bug Search Tool to access open and resolved bugs for a release.

The tool allows you to search for a specific bug ID, or for all bugs specific to a product and a release.

IOS XR 7.3.2 Base Images and Optional Packages

Release 7.3.2 Software

The following tables list the supported base images and optional packages and their corresponding file names.

  • The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.

  • The second table lists the supported software for N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, and N540-FH-AGG-SYS variants.

  • The third table lists the supported software for N540X-8Z16G-SYS-A/D and N540X-6Z18G-SYS-A/D variants.

 
Table 1. Release 7.3.2 Software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS

Base Image

Filename

Description

IOS XR Base Image

ncs540-mini-x-7.3.2.iso

IOS XR mandatory base image.

USB Boot Package

ncs540-usb_boot-7.3.2.zip

Package required to perform USB Boot.

Includes the same packages as the base image.

Optional Packages not included in the base image

Package

Filename

Description

IOS XR Manageability

ncs540-mgbl-1.0.0.0-r732.x86_64.rpm

Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server

IOS XR MPLS

ncs540-mpls-1.0.0.0-r732.x86_64.rpm

ncs540-mpls-te-rsvp-1.0.0.0-r732.x86_64.rpm

Supports MPLS and MPLS Traffic Engineering (MPLS-TE)

IOS XR Security

ncs540-k9sec-1.1.0.0-r732.x86_64.rpm

Supports MACsec and 802.1X

IOS XR ISIS

ncs540-isis-1.0.0.0-r732.x86_64.rpm

Supports ISIS

IOS XR OSPF

ncs540-ospf-2.0.0.0-r732.x86_64.rpm

Supports OSPF

IOS XR Lawful Intercept

ncs540-li-1.0.0.0-r732.x86_64.rpm

Supports Lawful Intercept (LI)

IOS XR Multicast

ncs540-mcast-1.0.0.0-r732.x86_64.rpm

Supports Multicast

IOS XR EIGRP

ncs540-eigrp-1.0.0.0-r732.x86_64.rpm

Supports EIGRP

Table 2. Release 7.3.2 Software for N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, and N540-FH-AGG-SYS

Base Image

Filename

Description

IOS XR Base Image

ncs540l-x64-7.3.2.iso

IOS XR base image with mandatory packages.

The base ISO image also includes the following optional packages:

  • xr-bgp

  • xr-ipsla

  • xr-is-is

  • xr-lldp

  • xr-mcast

  • xr-mpls-oam

  • xr-ncs540l-mcast

  • xr-ncs540l-netflow

  • xr-netflow

  • xr-ospf

  • xr-perfmgmt

  • xr-track

These optional packages are also included in NCS540l-iosxr-7.3.2.tar.

USB Boot Package

ncs540l-usb_boot-7.3.2.zip

Package required to perform USB Boot.

Includes the same packages as the base image.

Optional Packages not included in the base image

Package

Filename

Description

IOS XR Telnet (xr-telnet)

NCS540l-iosxr-7.3.2.tar

Supports Telnet

IOS XR EIGRP (xr-eigrp)

NCS540l-iosxr-7.3.2.tar

Supports EIGRP

IOS XR CDP (xr-cdp)

NCS540l-iosxr-7.3.2.tar

Supports CDP

IOS XR k9sec (xr-k9sec)

NCS540l-k9sec-rpms.7.3.2.tar

Supports 802.1X

Table 3. Release 7.3.2 Software for N540X-8Z16G-SYS-A/D and N540X-6Z18G-SYS-A/D

Base Image

Filename

Description

IOS XR Base Image

ncs540l-aarch64-7.3.2.iso

IOS XR base image with mandatory packages.

The ISO image also includes the following optional packages:

  • xr-bgp

  • xr-ipsla

  • xr-is-is

  • xr-lldp

  • xr-mcast

  • xr-mpls-oam

  • xr-ncs540l-mcast

  • xr-ncs540l-netflow

  • xr-netflow

  • xr-ospf

  • xr-perfmgmt

  • xr-track

These optional packages are also included in NCS540l-aarch64-iosxr-optional-rpms-7.3.2.tar.

USB Boot Package

ncs540l-aarch64-usb_boot-7.3.2.zip

Package required to perform USB Boot.

Includes the same packages as the base image.

Optional Packages not included in the base image

Package

Filename

Description

IOS XR Telnet (xr-telnet)

NCS540l-aarch64-iosxr-optional-rpms-7.3.2.tar

Supports Telnet

IOS XR EIGRP (xr-eigrp)

NCS540l-aarch64-iosxr-optional-rpms-7.3.2.tar

Supports EIGRP

IOS XR CDP (xr-cdp)

NCS540l-aarch64-iosxr-optional-rpms-7.3.2.tar

Supports CDP

IOS XR k9sec (xr-k9sec)

NCS540l-aarch64-k9sec-rpms.7.3.2.tar

Supports 802.1X

Determine Software Version

Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:

RP/0/RP0/CPU0:R1_PE1#show version 
Fri Oct 15 13:32:26.069 IST
Cisco IOS XR Software, Version 7.3.2
Copyright (c) 2013-2021 by Cisco Systems, Inc.

Build Information:
 Built By     : ingunawa
 Built On     : Wed Oct 13 20:17:42 PDT 2021
 Built Host   : iox-ucs-021
 Workspace    : /auto/srcarchive17/prod/7.3.2/ncs540/ws
 Version      : 7.3.2
 Location     : /opt/cisco/XR/packages/
 Label        : 7.3.2

cisco NCS-540 () processor
System uptime is 15 hours 53 minutes

Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:

RP/0/RP0/CPU0:R11_PE5_EG#show version 
Fri Oct 15 13:38:01.967 IST
Cisco IOS XR Software, Version 7.3.2 LNT
Copyright (c) 2013-2021 by Cisco Systems, Inc.

Build Information:
 Built By     : ingunawa
 Built On     : Thu Oct 14 08:19:43 UTC 2021
 Build Host   : iox-ucs-022
 Workspace    : /auto/srcarchive17/prod/7.3.2/ncs540l/ws
 Version      : 7.3.2
 Label        : 7.3.2

cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-28Z4C-SYS-A (C3708 @ 1.70GHz) processor with 8GB of memory
CL-PE1 uptime is 14 hours, 47 minutes
Cisco NCS 540 Series Fixed Router 28x10G, 4x100G

Log in to the router and enter the show version command on the N540X-8Z16G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants:

RP/0/RP0/CPU0:R15_PE7_GP#show version 
Fri Oct 15 13:44:43.868 IST
Cisco IOS XR Software, Version 7.3.2 LNT
Copyright (c) 2013-2021 by Cisco Systems, Inc.

Build Information:
 Built By     : ingunawa
 Built On     : Thu Oct 14 07:55:33 UTC 2021
 Build Host   : iox-lnx-072
 Workspace    : /auto/srcarchive17/prod/7.3.2/ncs540l-aarch64/ws
 Version      : 7.3.2
 Label        : 7.3.2

cisco NCS540L
cisco N540X-6Z18G-SYS-A processor with 8GB of memory
Darwin-PE6 uptime is 14 hours, 57 minutes
Cisco NCS 540 Series Fixed Router 18x1G, 6x1/10G, AC

Log in to the router and enter the show version command on the N540-FH-CSR-SYS and N540-FH-AGG-SYS variants:

RP/0/RP0/CPU0:R16_PE9_GP#show version
Cisco IOS XR Software, Version 7.3.2 LNT
Copyright (c) 2013-2021 by Cisco Systems, Inc.
 
Build Information:
 Built By     : ingunawa
 Built On     : Thu Oct 14 08:19:43 UTC 2021
 Build Host   : iox-ucs-022
 Workspace    : /auto/srcarchive17/prod/7.3.2/ncs540l/ws
 Version      : 7.3.2
 Label        : 7.3.2
 
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-FH-CSR-SYS (C3708 @ 1.70GHz) processor with 8GB of memory
APE11 uptime is 12 hours, 8 minutes
Cisco NCS 540 FH with 8xCPRI+4xCPRI/10G+8x10G+6x25G+2x100G 

Determine Firmware Support

Use the show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be CURRENT; Running and Programed version must be the same.

Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:

RP/0/RP0/CPU0:R1_PE1#show fpd package
Fri Oct 15 13:32:32.823 IST

=============================== ================================================
                                        Field Programmable Device Package
                                ================================================
                                               Req     SW      Min Req   Min Req
Card Type            FPD Description           Reload  Ver     SW Ver  Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M       Bootloader(A)              YES     1.14      1.14      0.0
                     CPU-IOFPGA(A)              YES     0.07      0.07      0.0
                     MB-IOFPGA(A)               YES     0.23      0.23      0.0
                     MB-MIFPGA                  YES     0.05      0.05      0.0
                     SATA-M500IT-MC(A)          NO      3.00      3.00      0.0
                     SATA-M500IT-MU-A(A)        NO      5.00      5.00      0.0
                     SATA-M500IT-MU-B(A)        NO      4.00      4.00      0.0
                     SATA-M5100(A)              NO     71.00     71.00      0.0
                     SATA-M600-MCT(A)           NO      5.00      5.00      0.0
                     SATA-SMART-128G(A)         NO    1241.00   1241.00     0.0
--------------------------------------------------------------------------------
N540-ACC-SYS         Bootloader(A)              YES     1.14      1.14      0.0
                     CPU-IOFPGA(A)              YES     0.07      0.07      0.0
                     MB-IOFPGA(A)               YES     0.23      0.23      0.0
                     MB-MIFPGA                  YES     0.05      0.05      0.0
                     SATA-M500IT-MC(A)          NO      3.00      3.00      0.0
                     SATA-M500IT-MU-A(A)        NO      5.00      5.00      0.0
                     SATA-M500IT-MU-B(A)        NO      4.00      4.00      0.0
                     SATA-M5100(A)              NO     71.00     71.00      0.0
                     SATA-M600-MCT(A)           NO      5.00      5.00      0.0
                     SATA-SMART-128G(A)         NO    1241.00   1241.00     0.0
--------------------------------------------------------------------------------
N540-PWR400-A        LIT-PriMCU-ACFW(A)         NO      0.04      0.04      0.0
                     LIT-SecMCU-ACFW(A)         NO      0.07      0.07      0.0
--------------------------------------------------------------------------------
N540-PWR400-D        LIT-PriMCU-DCFW(A)         NO      0.04      0.04      0.0
                     LIT-SecMCU-DCFW(A)         NO      0.06      0.06      0.0
                     SDG-PriMCU-DCFW(A)         NO      1.03      1.03      0.0
                     SDG-SecMCU-DCFW(A)         NO      1.03      1.03      0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS        Bootloader(A)              YES     1.14      1.14      0.0
                     CPU-IOFPGA(A)              YES     0.07      0.07      0.0
                     MB-IOFPGA(A)               YES     0.23      0.23      0.0
                     MB-MIFPGA                  YES     0.05      0.05      0.0
                     SATA-M500IT-MC(A)          NO      3.00      3.00      0.0
                     SATA-M500IT-MU-A(A)        NO      5.00      5.00      0.0
                     SATA-M500IT-MU-B(A)        NO      4.00      4.00      0.0
                     SATA-M5100(A)              NO     71.00     71.00      0.0
                     SATA-M600-MCT(A)           NO      5.00      5.00      0.0
                     SATA-SMART-128G(A)         NO    1241.00   1241.00     0.0
RP/0/RP0/CPU0:R1_PE2#show hw-module location all fpd
Fri Oct 15 13:32:46.184 IST

Auto-upgrade:Enabled
                                                                         FPD Versions
                                                                        ==============
Location   Card type             HWver FPD device       ATR Status    Running   Programd
-----------------------------------------------------------------------------------------
0/RP0      N540-24Z8Q2C-M        1.0   MB-MIFPGA            CURRENT     0.05      0.05
0/RP0      N540-24Z8Q2C-M        1.0   Bootloader           CURRENT     1.14      1.14
0/RP0      N540-24Z8Q2C-M        1.0   CPU-IOFPGA           CURRENT     0.07      0.07
0/RP0      N540-24Z8Q2C-M        1.0   MB-IOFPGA            CURRENT     0.23      0.23
0/RP0      N540-24Z8Q2C-M        1.0   SATA-M500IT-MU-B     CURRENT     4.00      4.00
0/PM0      N540-PWR400-A               SDG-PriMCU-ACFW      NOT READY
0/PM0      N540-PWR400-A               SDG-SecMCU-ACFW      NOT READY
0/PM1      N540-PWR400-A         1.0   SDG-PriMCU-ACFW      CURRENT     0.00      0.00
0/PM1      N540-PWR400-A         1.0   SDG-SecMCU-ACFW      CURRENT     0.00      0.00 

Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-FH-CSR-SYS and N540-FH-AGG-SYS variants:

RP/0/RP0/CPU0:R11_PE5_EG#show fpd package
Fri Oct 15 13:38:08.673 IST

=============================== ================================================
                                        Field Programmable Device Package
                                ================================================
                                               Req     SW      Min Req   Min Req
Card Type            FPD Description           Reload  Ver     SW Ver  Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A    ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D    ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540-24Q28LDD-SYS    IoFpga                     YES     2.01      0.00      0.0
                     IoFpgaGolden               YES     2.01      0.00      0.0
                     Primary-BIOS               YES     1.07      1.07      0.0
                     StdbyFpga                  YES     2.18      0.00      0.0
                     StdbyFpgaGolden            YES     2.14      0.00      0.0
                     TamFw                      YES     2.06      0.00      0.0
                     TamFwGolden                YES     2.06      0.00      0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A     ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D     ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS      DpFpgaCpri                 YES     0.20      0.20      0.0
                     DpFpgaEth                  YES     1.18      1.18      0.0
                     IoFpga                     YES     1.30      1.30      0.0
                     IoFpgaGolden               YES     1.30      1.30      0.0
                     Primary-BIOS               YES     1.21      1.21      0.0
                     StdbyFpga                  YES     0.46      0.46      0.0
                     StdbyFpgaGolden            YES     0.46      0.46      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS      DpFpga                     YES     0.19      0.19      0.0
                     IoFpga                     YES     1.30      1.30      0.0
                     IoFpgaGolden               YES     1.30      1.30      0.0
                     Primary-BIOS               YES     1.21      1.21      0.0
                     StdbyFpga                  YES     0.46      0.46      0.0
                     StdbyFpgaGolden            YES     0.46      0.46      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A   ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D   ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A    ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D    ADMConfig                  YES     1.04      1.04      0.0
                     IoFpga                     YES     2.07      2.07      0.0
                     IoFpgaGolden               YES     2.07      2.03      0.0
                     Primary-BIOS               YES     1.20      1.20      0.0
                     StdbyFpga                  YES     0.40      0.40      0.0
                     StdbyFpgaGolden            YES     0.40      0.40      0.0
                     TamFw                      YES     4.11      4.11      0.0
                     TamFwGolden                YES     4.11      4.11      0.0
--------------------------------------------------------------------------------
PWR-400W-ACPI        LI-PrimMCU                 NO      0.04      0.04      0.0
                     LI-SecMCU                  NO      0.06      0.06      0.0
                     PrimMCU                    NO      1.02      1.02      0.0
                     SecMCU                     NO      1.03      1.03      0.0
--------------------------------------------------------------------------------
PWR-400W-DCPI        LI-PrimMCU                 NO      0.04      0.04      0.0
                     LI-SecMCU                  NO      0.06      0.06      0.0
                     PrimMCU                    NO      1.03      1.03      0.0
                     SecMCU                     NO      1.03      1.03      0.0
--------------------------------------------------------------------------------
PWR-750W-ACPI        EM-PrimMCU                 NO      1.02      1.02      0.0
                     EM-SecMCU                  NO      1.03      1.03      0.0
--------------------------------------------------------------------------------
PWR-750W-DCPI        EM-PrimMCU                 NO      1.03      1.03      0.0
                     EM-SecMCU                  NO      3.01      3.01      0.0 
RP/0/RP0/CPU0:R11_PE5#show hw-module location all fpd
Fri Oct 15 13:38:17.566 IST

Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
                                                                         FPD Versions
                                                                        ==============
Location   Card type             HWver FPD device       ATR Status   Running Programd  Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   ADMConfig            CURRENT    1.04    1.04         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   IoFpga               CURRENT    2.07    2.07         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   IoFpgaGolden     B   NEED UPGD          1.29         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   Primary-BIOS      S  CURRENT    1.20    1.20         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   StdbyFpga         S  CURRENT    0.40    0.40         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   StdbyFpgaGolden  BS  NEED UPGD          0.00         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   TamFw             S  CURRENT    4.11    4.11         0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A      2.0   TamFwGolden      BS  NEED UPGD          2.04         0/RP0
RP/0/RP0/CPU0:PE1#show hw-module fpd
 
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
                                                                         FPD Versions
                                                                        ==============
Location   Card type             HWver FPD device       ATR Status   Running Programd  Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   DpFpgaCpri           CURRENT    0.20    0.20         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   DpFpgaEth            CURRENT    1.18    1.18         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   IoFpga               CURRENT    1.30    1.30         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   IoFPgaGolden     B   NEED UPGD          1.20         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   Primary-BIOS      S  CURRENT    1.21    1.21         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   StdbyFpga         S  CURRENT    0.46    0.46         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   StdbyFpgaGolden  BS  NEED UPGD          0.00         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   TamFw             S  CURRENT    6.05    6.05         0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS       1.0   TamFwGolden      BS  NEED UPGD          6.04         0/RP0
0/PM0      N540-PWR750-A         0.0   EM-PrimMCU           CURRENT    1.02    1.02       NOT REQ
0/PM0      N540-PWR750-A         0.0   EM-SecMCU            CURRENT    1.03    1.03       NOT REQ
0/PM1      N540-PWR750-A         0.0   EM-PrimMCU           CURRENT    1.02    1.02       NOT REQ
0/PM1      N540-PWR750-A         0.0   EM-SecMCU            CURRENT    1.03    1.03       NOT REQ

Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-6Z18G-SYS-A/D, and N540X-8Z16G-SYS-A/D variants:

RP/0/RP0/CPU0:APE11#show fpd package
 Fri Oct 15 13:44:49.252 IST

=============================== ================================================
                                        Field Programmable Device Package
                                ================================================
                                               Req     SW      Min Req   Min Req
Card Type            FPD Description           Reload  Ver     SW Ver  Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A      BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D      BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A    BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D    BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A    BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D    BckUp-BootLoader           YES    20.04     20.04      0.0
                     IoFpga                     YES     0.15      0.15      0.0
                     IoFpgaGolden               YES     0.15      0.15      0.0
                     Prim-BootLoader            YES    20.04     20.04      0.0
                     StdbyFpga                  YES     0.33      0.33      0.0
                     StdbyFpgaGolden            YES     0.33      0.33      0.0
                     TamFw                      YES     6.05      6.05      0.0
                     TamFwGolden                YES     6.05      6.05      0.0 
RP/0/RP0/CPU0:R16_PE9_GP#show hw-module location all fpd
Fri Oct 15 13:44:59.449 IST

Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
                                                                         FPD Versions
                                                                        ==============
Location   Card type             HWver FPD device       ATR Status   Running Programd  Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   IoFpga               CURRENT    0.15    0.15         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   IoFpgaGolden     B   NEED UPGD          0.00         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   Prim-BootLoader      CURRENT   20.04   20.04         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   StdbyFpga         S  CURRENT    0.33    0.33         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   StdbyFpgaGolden  BS  NEED UPGD          0.00         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   TamFw             S  CURRENT    6.05    6.05         0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A     0.2   TamFwGolden      BS  CURRENT            6.05         0/RP0

Other Important Information

Upgrading Cisco IOS XR Software

Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.

The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-7.3.2.tar file.

The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540X-16Z4G8Q2C-A/D variants is available along with the software image in NCS540l-docs-7.3.2.tar file.

The upgrade document for N540X-6Z18G-SYS-A/D and N540X-8Z16G-SYS-D variants is available along with the software image in NCS540l-aarch64-docs-7.3.2.tar file.

Use user-class Option 'xr-config' Instead Of 'exr-config' To Provision ZTP

In Cisco IOS XR Release 7.3.1 and earlier, the system accepts the device sending user-class = "exr-config"; however starting Cisco IOS XR Release 7.3.2 and later, you must use only user-class = "xr-config".

In Cisco IOS XR Release 7.3.2 and later, use:

host cisco-rp0 {
   hardware ethernet e4:c7:22:be:10:ba;
   fixed-address 172.30.12.54;
   if exists user-class and option user-class = "iPXE" {
      filename = "http://172.30.0.22/boot.ipxe";
   } elsif exists user-class and option user-class = "xr-config" {
      filename = "http://172.30.0.22/scripts/cisco-rp0_ztp.sh";
   }
}

Additional References

Supported MIBs

The Cisco NCS 5500 MIB support list is also applicable to the Cisco NCS 540 Series Routers. For the list of supported MIBs, see the Cisco NCS5500 MIB Support List.