What's New in Cisco IOS XR Release 7.6.1
Hardware |
Description |
||
---|---|---|---|
Optics |
This release introduces the following optics:
|
The following features are supported on all the NCS 540 variants.
Feature | Description | ||
---|---|---|---|
IP Addresses and Services |
|||
Using the log-input keyword, you can now enable Access Control Entries (ACEs) to generate log messages that help you identify the interface through which a particular traffic stream ingresses the routers. This information aids in optimizing traffic flow across the network. There was no option to enable logging of ingress interfaces with an ACE in earlier releases. This feature introduces an optional keyword log-input for the following commands: |
|||
Modular QoS |
|||
You can now differentiate traffic in the MPLS forwarding domain and manage traffic from ingress PE to egress PE based on the MPLS EXP bit of the MPLS header for EVPN multi-home scenarios. |
|||
Multicast |
|||
You can configure EVPN in the access node under the same bridge domain as EVPN in the core and create a pseudowire (PW) to the nearest PE that binds the access circuits using EVPN. This PW between the access PE and the single-homed PE ensures that the access nodes can leverage the benefits of EVPN. |
|||
MPLS |
|||
With the unidimensional scale parameter value increased to 1000 on the router, you can now configure more targeted LDP sessions, which use targeted "hello" messages to discover extended neighbors in an MPLS network. |
|||
Routing |
|||
With IS-IS protocol extensions supporting Interior Gateway Protocol (IGP) Flexible Algorithm (Flex-Algorithm) on the IP data plane, you can now use the Algorithm to calculate IGP paths in an IP network without running Segment Routing. The IGP Flex-Algorithm allows for user-defined algorithms where the IGP computes paths based on a user-defined combination of metric type and constraints. Earlier, you could calculate IGP only using the Shortest Path First (SPF), which meant that you didn't have any choice except to use the default IGPpath calculated based on a native IGP metric. The following command is introduced: The following commands are modified: |
|||
You can now configure the MPLS TE traffic for equal-cost multipath (ECMP) such that it flows only through TE tunnels. This is useful in scenarios where the hardware has resource constraints that limit the number of mixed ECMP routes. In earlier releases, IS-IS installed multiple ECMPs for a route in the Routing Information Base (RIB) through TE tunnels and physical interfaces by default. This feature introduces the following command: |
|||
You can now configure up to 32 IS-IS instances, thus enhancing the ability to isolate resources within your router and on the network. This ability enables you to configure more instances consuming network-wide resources at different rates, giving you more flexibility to manage your networks efficiently. In earlier releases, you could configure up to16 IS-IS instances. |
|||
System Setup and Software Installation |
|||
This feature allows you to build your GISO image without support from Cisco. You can now select the install files, add your RPMs, repackage them as a custom image, and install the image. In previous releases, you had to contact Cisco to get your GISO built.
|
|||
L2VPN and Ethernet Services |
|||
This feature introduces CFM support for single-homed EVPN Emulated Local Area Network (ELAN) services. This functionality helps you to monitor the ELAN services of users against their contractual service-level agreements (SLAs), thereby providing high speed Layer 2 and Layer 3 services with high resiliency and less operational complexity to different market segments. |
|||
Supports multicast data packets from multihomed sources when the source is behind a BVI and the receivers at the core or on a bridge domain.
|
|||
You can configure EVPN VPWS in the access node under the same bridge domain as EVPN in the core to build a PW to the nearest high-end PE that stitches those access circuits using EVPN. This allows the access nodes to leverage the benefits of EVPN. This feature also allows you to reduce the number of pseudowires (PWs) between the network provider edge (N-PE) devices by replacing PE devices with user provider edge (U-PE) and network provider edge (N-PE) devices.
|
|||
Enhancement to the show ethernet cfm command to include LTR and LTM statistics |
This enhancement adds statistics for Linktrace Messages (LTM) and Linktrace Replies (LTR) in the show ethernet cfm local meps verbose command output. Using LTM and LTR count, you can trace the source of network failure and track the path to a unicast destination MAC address. |
||
You can now configure the recovery time for the EVPN core isolation group after the core interfaces recover from a network failure. This functionality is important because post-failure recovery, you can provide sufficient time for the EVPN PE nodes to relearn the MAC addresses and BGP routes received from the remote PEs. There's also time to handle delays in exchanging EVPN routes after recovery. This feature introduces the core-de-isolation command under the EVPN Timers configuration mode. |
|||
Segment Routing |
|||
Programming Non-Active Candidate Paths of an SR Policy |
By programming non-active candidate paths (CPs) in the forwarding plane, you ensure that if the existing active CP is unavailable, the traffic switches quickly to the new CP, thus minimizing loss of traffic flow. In earlier releases, instantiating a non-active CP to the forwarding plane after the unavailability of the active CP could take a few seconds, resulting in potential loss of traffic flow. This feature introduces the following command:
|
||
Programmability |
|||
Accounting Records for NETCONF Operations |
Depending on the accounting configuration command you use, every NETCONF operation that the router performs is reported to the local server as syslog messages or remote AAA servers like TACACS+ as accounting messages, or both. |
The following features are supported on N540-24Q8L2DD-SYS variant.
Feature | Description |
---|---|
Modular QoS |
|
Scale Limits for H-QoS on Cisco NCS 540-24Q8L2DD-SYS Routers |
With this release, 750 egress interfaces and subinterfaces are available for configuring QoS policies in the H-QoS model on Cisco NCS 540-24Q8L2DD-SYS routers. You can now achieve higher egress policy-map scales because of the increased number of VOQs available per subinterface. In earlier releases, 250 egress interfaces and subinterfaces were available for configuring QoS policies in the H-QoS model. |
Interface and Hardware Component |
|
Local LAG hashing with PPPoE traffic |
Load Balancing for Link Aggregation (LAG) AC and Equal Cost Multipath (ECMP) for PPPoE traffic is now available on Cisco NCS 540 routers and operates in the native and compatible modes. This load balancing is achieved by distributing PPPoE traffic on all available links. This feature is now supported on Cisco N540-24Q8L2DD-SYS router. |
CFM Monitoring on EVPN |
Ethernet Connectivity Fault Management (CFM) is a service-level OAM protocol that provides tools for monitoring and troubleshooting end-to-end Ethernet services per VLAN. With this release, CFM over EVPN is supported on Cisco N540-24Q8L2DD-SYS router and operate in compatibility mode. |
SPAN over PW |
Pseudowire-Switched Port Analyzer (PW-SPAN) is now available on Cisco N540-24Q8L2DD-SYS router and operate in the native mode. You can mirror designated traffic on the source port over a pseudo-wire to a central location with PW-SPAN. This functionality, also known as pseudo-wire traffic mirroring, allows the centralization of expensive network traffic analysis tools. |
L2VPN and Ethernet Services |
|
This feature is now supported on Cisco N540-24Q8L2DD-SYS router and operate in native and compatibility modes. |
|
Flow-Label Support on FAT-PW |
This enhancement enables the MPLS OAM pings to work between Cisco devices and the third-party devices. Thus, allowing Flow-Aware Transport (FAT) Pseudowires (PW) to provide the load-balance capability across equal-cost multipath (ECMP) routes by adding a new label, called Flow Label, onto the bottom of the label stack. This feature is now supported on Cisco N540-24Q8L2DD-SYS router. |
Segment Routing |
|
SR Performance Measurement: Measurement Modes |
This feature is now supported on Cisco N540-24Q8L2DD-SYS router and operate in native and compatibility modes. This feature supports one-way, two-way, and loopback measurement modes. |
SR Performance Measurement: IP Endpoint Delay Measurement and Liveness Monitoring |
This feature measures the end-to-end delay and monitors liveness of a specified IP endpoint node, including VRF-aware (awareness of multiple customers belonging to different VRFs), is now supported on Cisco N540-24Q8L2DD-SYS router. |
The following feature is supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
Feature | Description |
---|---|
System Security |
|
Reimage Protection for Routers |
By disallowing USB and PXE boots at the BIOS level, this feature aims to prevent the resale of stolen routers. Such intervention ensures that attackers can't use the USB or PXE boot facility to erase the existing configuration and boot the stolen router with a fresh IOS XR image for resale. This feature introduces the platform security reimage-protection enable command and is supported on the following NCS 540 router variants:
|
The following feature is supported on N540-ACC-SYS, N540X-ACC-SYS, N540-24Z8Q2C-SYS,N540-FH-CSR-SYS, N540-FH-AGG-SYS, N540X-16Z4G8Q2C-A/D, N540-12Z20G-SYS-A/D, and N540X-12Z16G-SYS-A/D variants.
Feature |
Description |
---|---|
Network Synchronization |
|
Ethernet Synchronization Message Channel (ESMC) allows you to transmit Synchronization Status Message (SSM) information by using the ESMC protocol data units (PDUs). In this release, Synchronous Ethernet ESMC and SSM are supported on the following Cisco NCS 540 router variants:
ITU-T G.8262.1 defines the Timing characteristics of a synchronous equipment slave clock. In this release, ITU-T G.8262.1 is supported on the following Cisco NCS 540 router variants:
|
Restrictions and Limitations on the Cisco NCS 540 Series Router
-
Fabric multicast queue stats are not supported in N540X-8Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
-
Unlabeled BGP PIC EDGE for global prefixes is not supported.
-
The show inventory and the show diagnostic commands do not display the fan serial number for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, and N540X-12Z16G-SYS-A/D variants.
-
The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.
-
The hw-module profile mfib statistics command is not supported.
Cisco IOS XR Caveats Release 7.6.1
Bug ID |
Headline |
---|---|
IPv6 BFD packets getting control timer expired due to that ISIS OSPF protocols flapped during RPFO |
IOS XR Base Images and Optional Packages
For more information on system setup and software installation process, see System Setup and Software Installation Guide for Cisco NCS 540 Series Routers.
For general and ordering information see:
-
Cisco Network Convergence System 540 Fronthaul Routers Data Sheet
-
Cisco Network Convergence System 540 Large Density Router Data Sheet
-
Cisco Network Convergence System 540 Medium Density Routers Data Sheet
-
Cisco Network Convergence System 540 Small Density Router Data Sheet
To install the Cisco NCS 540 Series Routers, see Cisco NCS 540 Router Hardware Installation Guide.
Release 7.6.1 Software
The following tables list the supported base images and optional packages and their corresponding file names.
-
The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.
-
The second table lists the supported software for N540-24Q8L2DD-SYS, N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, and N540-FH-AGG-SYS variants.
-
The third table lists the supported software for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D and N540X-6Z18G-SYS-A/D variants.
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540-mini-x-7.6.1.iso |
IOS XR mandatory base image. |
USB Boot Package |
ncs540-usb_boot-7.6.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Manageability |
ncs540-mgbl-1.0.0.0-r761.x86_64.rpm |
Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server |
IOS XR MPLS |
ncs540-mpls-1.0.0.0-r761.x86_64.rpm ncs540-mpls-te-rsvp-1.0.0.0-r761.x86_64.rpm |
Supports MPLS and MPLS Traffic Engineering (MPLS-TE) |
IOS XR Security |
ncs540-k9sec-1.0.0.0-r761.x86_64.rpm |
Supports MACsec and 802.1X |
IOS XR ISIS |
ncs540-isis-1.0.0.0-r761.x86_64.rpm |
Supports ISIS |
IOS XR OSPF |
ncs540-ospf-1.0.0.0-r761.x86_64.rpm |
Supports OSPF |
IOS XR Lawful Intercept |
ncs540-li-1.0.0.0-r761.x86_64.rpm |
Supports Lawful Intercept (LI) |
IOS XR Multicast |
ncs540-mcast-1.0.0.0-r761.x86_64.rpm |
Supports Multicast |
IOS XR EIGRP |
ncs540-eigrp-1.0.0.0-r761.x86_64.rpm |
Supports EIGRP |
IOS XR LI-CTRL |
ncs540-lictrl-1.0.0.0-r761.x86_64.rpm |
Supports LI-CTRL |
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540l-x64-7.6.1.iso |
IOS XR base image with mandatory packages. The base ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-iosxr-7.6.1.tar. |
USB Boot Package |
ncs540l-usb_boot-7.6.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Telnet (xr-telnet) |
NCS540l-iosxr-7.6.1.tar |
Supports Telnet |
IOS XR EIGRP (xr-eigrp) |
NCS540l-iosxr-7.6.1.tar |
Supports EIGRP |
IOS XR CDP (xr-cdp) |
NCS540l-iosxr-7.6.1.tar |
Supports CDP |
IOS XR k9sec (xr-k9sec) |
NCS540l-k9sec-rpms.7.6.1.tar |
Supports 802.1X |
IOS XR RIP (xr-rip) |
NCS540l-iosxr-7.6.1.tar |
Supports RIP |
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540l-aarch64-7.6.1.iso |
IOS XR base image with mandatory packages. The ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-aarch64-iosxr-optional-rpms-7.6.1.tar. |
USB Boot Package |
ncs540l-aarch64-usb_boot-7.6.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Telnet (xr-telnet) |
NCS540l-aarch64-iosxr-optional-rpms-7.6.1.tar |
Supports Telnet |
IOS XR EIGRP (xr-eigrp) |
NCS540l-aarch64-iosxr-optional-rpms-7.6.1.tar |
Supports EIGRP |
IOS XR CDP (xr-cdp) |
NCS540l-aarch64-iosxr-optional-rpms-7.6.1.tar |
Supports CDP |
IOS XR k9sec (xr-k9sec) |
NCS540l-aarch64-k9sec-rpms.7.6.1.tar |
Supports 802.1X |
IOS XR RIP (xr-rip) |
NCS540l-aarch64-iosxr-optional-rpms-7.6.1.tar |
Supports RIP |
Determine Software Version
Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.6.1
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sat Mar 26 19:42:00 PDT 2022
Built Host : iox-ucs-050
Workspace : /auto/srcarchive17/prod/7.6.1/ncs540/ws
Version : 7.6.1
Location : /opt/cisco/XR/packages/
Label : 7.6.1
cisco NCS-540 () processor
System uptime is 1 day 4 hours 21 minutes
Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.6.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Mar 27 01:29:19 UTC 2022
Build Host : iox-ucs-049
Workspace : /auto/srcarchive17/prod/7.6.1/ncs540l/ws
Version : 7.6.1
Label : 7.6.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540X-16Z4G8Q2C-A (C3708 @ 1.70GHz) processor with 8GB of memory
R4-EG-PE4 uptime is 1 day, 4 hours, 25 minutes
Cisco NCS 540 System with 16x10G+4x1GCu+8x25G+2x100G DC
Log in to the router and enter the show version command on the N540X-8Z16G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.6.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Mar 27 01:22:05 UTC 2022
Build Host : iox-ucs-048
Workspace : /auto/srcarchive17/prod/7.6.1/ncs540l-aarch64/ws
Version : 7.6.1
Label : 7.6.1
cisco NCS540L
cisco N540X-6Z18G-SYS-A processor with 8GB of memory
R13-Darwin-CE1 uptime is 1 day, 1 hour, 43 minutes
Cisco NCS 540 Series Fixed Router 18x1G, 6x1/10G, AC
Log in to the router and enter the show version command on the N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.6.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Mar 27 01:29:19 UTC 2022
Build Host : iox-ucs-049
Workspace : /auto/srcarchive17/prod/7.6.1/ncs540l/ws
Version : 7.6.1
Label : 7.6.1
cisco NCS540L (D1519 @ 1.50GHz)
cisco N540-24Q8L2DD-SYS (D1519 @ 1.50GHz) processor with 16GB of memory
R18_PE9_Arches uptime is 1 day, 9 hours, 36 minutes
Cisco NCS540 Series, Fixed Router 2x400G, 8x50G, 24x25G Chassis
Log in to the router and enter the show version command on the N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router# show version
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 ADMConfig CURRENT 5.00 5.00 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 IoFpgaGolden B NEED UPGD 0.15 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 Prim-BootLoader CURRENT 20.04 20.04 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 StdbyFpga S CURRENT 1.09 1.09 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 StdbyFpgaGolden BS NEED UPGD 0.30 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 TamFwGolden BS CURRENT 6.05 0/RP0
Determine Firmware Support
Usethe show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be “CURRENT”; Running and Programed version must be the same. The Golden FPDs with “NEED UPGD” can be ignored, the Golden FPDs are not upgradable.
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.07 0.07 0.0
MB-IOFPGA(A) YES 0.23 0.23 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 71.00 71.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.07 0.07 0.0
MB-IOFPGA(A) YES 0.23 0.23 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 71.00 71.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LIT-PriMCU-ACFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-ACFW(A) NO 0.07 0.07 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LIT-PriMCU-DCFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-DCFW(A) NO 0.06 0.06 0.0
SDG-PriMCU-DCFW(A) NO 1.03 1.03 0.0
SDG-SecMCU-DCFW(A) NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-X-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.07 0.07 0.0
MB-IOFPGA(A) YES 0.23 0.23 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 71.00 71.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.07 0.07 0.0
MB-IOFPGA(A) YES 0.23 0.23 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 71.00 71.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/RP0 N540-ACC-SYS 1.0 MB-MIFPGA CURRENT 0.05 0.05
0/RP0 N540-ACC-SYS 1.0 Bootloader CURRENT 1.16 1.16
0/RP0 N540-ACC-SYS 1.0 CPU-IOFPGA CURRENT 0.07 0.07
0/RP0 N540-ACC-SYS 1.0 MB-IOFPGA CURRENT 0.23 0.23
0/RP0 N540-ACC-SYS 1.0 SATA-M500IT-MU-B CURRENT 4.00 4.00
0/PM0 N540-PWR400-A 1.256 LIT-PriMCU-ACFW CURRENT 0.04 0.04
0/PM0 N540-PWR400-A 1.256 LIT-SecMCU-ACFW CURRENT 0.07 0.07
0/PM1 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D and N540X-16Z4G8Q2C-A/D variants:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig YES 2.03 2.03 0.0
ADM-MBConfig YES 2.01 2.01 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 1.08 1.08 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config YES 1.02 1.02 1.0
ADM2_Config YES 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config YES 0.09 0.09 0.0
ADM1_Config YES 1.01 1.01 2.0
ADM2_Config YES 0.09 0.09 0.0
ADM2_Config YES 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 ADMConfig CURRENT 1.05 1.05 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpga CURRENT 2.07 2.07 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpgaGolden B CURRENT 2.03 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 Primary-BIOS S CURRENT 1.33 1.33 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpga S CURRENT 0.40 0.40 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFw S CURRENT 4.11 4.11 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFwGolden BS NEED UPGD 0.00 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-6Z18G-SYS-A/D, and N540X-8Z16G-SYS-A/D variants:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-6Z14G-SYS-D ADMConfig YES 5.03 5.03 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 1.09 1.09 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D ADMConfig YES 5.00 5.00 0.0
BckUp-BootLoader YES 20.04 20.04 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.17 0.17 0.0
Prim-BootLoader YES 20.04 20.04 0.0
StdbyFpga YES 1.09 1.09 0.0
StdbyFpgaGolden YES 0.34 0.34 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 ADMConfig CURRENT 5.00 5.00 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 IoFpgaGolden B NEED UPGD 0.15 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 Prim-BootLoader CURRENT 20.04 20.04 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 StdbyFpga S CURRENT 1.09 1.09 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 StdbyFpgaGolden BS NEED UPGD 0.30 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540X-4Z14G2Q-A 0.3 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig YES 2.03 2.03 0.0
ADM-MBConfig YES 2.01 2.01 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 1.08 1.08 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config YES 1.02 1.02 1.0
ADM2_Config YES 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config YES 0.09 0.09 0.0
ADM1_Config YES 1.01 1.01 2.0
ADM2_Config YES 0.09 0.09 0.0
ADM2_Config YES 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 ADM-DBConfig NEED UPGD 1.51 1.51 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 ADM-MBConfig CURRENT 2.01 2.01 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 IoFpgaGolden B NEED UPGD 2.10 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 Primary-BIOS S CURRENT 1.08 1.08 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 StdbyFpga S CURRENT 2.59 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 TamFwGolden BS NEED UPGD 0.00 0/RP0
0/PM0 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM0 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router# show fpd package
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM1_Config CURRENT 0.09 0.09 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM2_Config CURRENT 0.09 0.09 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 DpFpga CURRENT 0.21 0.21 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpga CURRENT 1.30 1.30 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpgaGolden B NEED UPGD 1.23 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 Primary-BIOS S CURRENT 1.33 1.33 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpga S CURRENT 0.46 0.46 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpgaGolden BS NEED UPGD 0.43 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
0/PM1 N540-PWR400-A 0.0 PrimMCU NEED UPGD 0.02 0.02 NOT REQ
0/PM1 N540-PWR400-A 0.0 SecMCU NEED UPGD 0.02 0.02 NOT REQ
RP/0/RP0/CPU0:Felidae-PE7#sh
show shutdown
RP/0/RP0/CPU0:Router# show hw-module fpd
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig YES 2.03 2.03 0.0
ADM-MBConfig YES 2.01 2.01 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 1.08 1.08 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config YES 1.02 1.02 1.0
ADM2_Config YES 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config YES 0.09 0.09 0.0
ADM1_Config YES 1.01 1.01 2.0
ADM2_Config YES 0.09 0.09 0.0
ADM2_Config YES 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADMConfig YES 1.05 1.05 0.0
IoFpga YES 2.07 2.07 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.33 1.33 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
Important Notes
Supported Transceiver Modules
For more information on the supported transceiver modules, see Transceiver Module Group (TMG) Compatibility Matrix. In the Begin your Search search box, enter the keyword NCS540 and click Enter.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.
The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-7.6.1.tar file.
The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-24Q8L2DD-SYS, N540-FH-AGG-SYS, and N540-FH-CSR-SYS variants is available along with the software image in NCS540l-docs-7.6.1.tar file.
The upgrade document for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants is available along with the software image in NCS540l-aarch64-docs-7.6.1.tar file.
Note |
Quad configurations will be lost when you perform a software downgrade on Cisco NCS 540 Routers that support quad configurations from IOS XR Release 7.5.1 onwards to a release prior to IOS XR Release 7.5.1 due to a non-backward compatibility change. The lost configuration can be applied manually after the downgrade. |
Use user-class Option 'xr-config' Instead Of 'exr-config' To Provision ZTP
In Cisco IOS XR Release 7.3.1 and earlier, the system accepts the device sending user-class = "exr-config"; however starting Cisco IOS XR Release 7.3.2 and later, you must use only user-class = "xr-config".
In Cisco IOS XR Release 7.3.2 and later, use:
host cisco-rp0 {
hardware ethernet e4:c7:22:be:10:ba;
fixed-address 172.30.12.54;
if exists user-class and option user-class = "iPXE" {
filename = "http://172.30.0.22/boot.ipxe";
} elsif exists user-class and option user-class = "xr-config" {
filename = "http://172.30.0.22/scripts/cisco-rp0_ztp.sh";
}
}
Additional References
Supported MIBs
The Cisco NCS 5500 MIB support list is also applicable to the Cisco NCS 540 Series Routers. For the list of supported MIBs, see the Cisco NCS5500 MIB Support List.