What's New in Cisco IOS XR Release 7.8.1
Cisco IOS XR Release 7.8.1 is a new feature release for Cisco NCS 540 Series routers. For more details on the Cisco IOS XR release model and associated support, see Guidelines for Cisco IOS XR Software.
New in Documentation
This release introduces rich and intuitive ways for you to access YANG data models supported in the Cisco IOS XR software.
Product | Description |
---|---|
Search by release number, error strings, or compare release numbers to view a detailed repository of error messages and descriptions. |
|
Select the MIB of your choice from a drop-down to explore an extensive repository of MIB information. |
|
YANG Data Models Navigator |
We have launched the tool as an easy reference to view the Data Models (Native, Unified, OpenConfig) supported in IOS XR platforms and releases. You can explore the data model definitions, locate a specific model, and view the containers and their respective lists, leaves, leaf lists, Xpaths, and much more. As we continue to enhance the tool, we would love to hear your feedback. You are welcome to drop us a note here. |
Use Case-based Documentation at Learning Labs |
You can now quickly explore and experiment on use-cases without setting up any hardware resources with the new Interactive documentation for Cisco 8000 routers on DevNet Learning Labs. Powered by Jupyter, the automated code blocks within the documentation enable you to configure the desired functionality on the routers and retrieve real-time output swiftly. Check out the new interactive documentation here: |
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
The following features are supported on all the NCS 540 variants.
Feature | Description |
---|---|
IP Addresses and Services |
|
You can now use HSRP version 2, which has an expanded group IDs up to 4095 with 255 number of (IPv4 and IPv6 combined) HSRP sessions. Now, the inter operation with the other routers is supported. Earlier, you could configure only up to 255 group IDs with 255 number of (IPv4 and IPv6 combined) HSRP sessions. |
|
L2VPN and Ethernet Services |
|
From this release, you can configure up to 64 VLAN-IDs per VLAN list. Previously, the number of VLAN-IDs supported were only up to 9, per VLAN list. The enhanced VLAN-IDs help to add more number of customers in an Ethernet network. Use the encapsulation list-extended dot1q command, to configure up to 64 VLAN-IDs. |
|
Storm control helps prevent LAN ports from being disrupted by a broadcast, multicast, or unicast traffic storm. You can now configure different storm control rates for each subinterface on a physical port. This will give you control at a granular level and prevent flooding of excess traffic at the subinterface level. In earlier releases, storm control could be configured only at the physical port level or only on one subinterface under a main interface. This feature modifies the hw-module storm-control-combine-policer-bw enable command to enable per subinterface configuration support for storm control. |
|
From this release, L2 subinterface configuration with single tagged VLAN range can be matched with the double tagged frames. Previously, the packet matching was done only with single VLAN ID and the double tagged packets were dropped. With single tagged VLAN range support for double tagged frames, the traffic can reach the VLAN destination safely. |
|
You can now configure the MAC address limit for bridge domains to learn only static MAC addresses and to drop traffic from unknown sources. Malicious attackers can spoof a Layer 2 MAC address to change dynamic entries in the MAC table. However, with this functionality enabling you to configure the MAC address limit for bridge domains to learn only static MAC addresses, the dynamic MAC addresses are blocked. In addition, a static entry always overrules dynamic entries. This functionality thus prevents the interception of your data by unauthorized users and improves your network security. |
|
Modular QoS |
|
Support for displaying the QoS hardware module profiles |
It is now possible to view the supported QoS hardware module profile names on the router by using the show qos hw-module-status command. You can now identify if the profile is configured on the router, and whether it requires a reboot or not. |
Network Synchronization |
|
PTP Holdover Traceability flag override for T-GM and Virtual-port/APTS modes |
This feature extends the PTP holdover traceability suppression functionality to T-GM and Virtual-port/APTS modes. |
Netflow |
|
This feature provides improved information about IP traffic flows, through the introduction of sub-menus to two commands. The record ipv6 command is modified to support a new optional keyword, srv6. A new subtype for ipv4 record and ipv6 record is introduced for l2-l3 records. For more information, see:
|
|
Routing |
|
This feature introduces the new algorithm 0 command and provides information on the updated flex-algo command. These updates enable individual granularity for flex-algo and regular SPF algorithms. |
|
Segment Routing |
|
This feature enables support for On-Demand Next-Hop over SRv6-TE policy. When SRv6-TE is configured, the ODN policy uses SRv6-TE tunnels, thus improving traffic performance. |
|
An SRv6 segment using an IPv6 prefix enables validation of all SIDs in the segment list. Segments in the topology database are validated, providing for improved traffic flow. |
|
This solution allows Segment Routing to meet the requirements of a connection-oriented transport network, which was historically delivered over circuit-switched SONET/SDH networks. Circuit-style SR-TE policies allow a common network infrastructure to be used for both connection-oriented services and classic IP-based transport. This eliminates the need for multiple parallel networks, which greatly reduces both capital expenditures (CapEx) and operating expenditures (OpEx). |
|
Path Tracing (PT) provides a log or record of the packet path as a sequence of interface IDs along with its time stamp. In Path Tracing, a node can behave as a source, midpoint, or sink node. The Path Tracing Midpoint feature is implemented in this release which measures the hop-by-hop delay, traces the path in the network and collects egress interface load information and interface Id, and stores them in the Midpoint Compressed Data (MCD) section of Hop-by-Hop Path Tracing (HbH-PT) header. This feature provides visibility to the Path Tracing Midpoint node that handles IPv6 transit in Path Tracing and full characterization of the packet delivery path. It provides real time information and the current status of the network. This feature introduces the following command: |
|
The new anomaly optional keyword is introduced to affinity flex-algo command. This keyword helps to advertise the flex-algo affinity when the performance measurement signals a link anomaly, such as an excessive delay on a link. You could use the anomaly option to exclude the link from flex-algo path computations. |
|
Manual SRv6-TE Policies with Explicit Paths |
This feature is now supported on Cisco NCS 540 routers. To enable the native mode, use the hw-module profile npu native-mode-enable command in the configuration mode. Ensure that you reload the router after configuring the native mode. |
The Unreachable Prefix Announcement (UPA) notifies the loss of prefix reachability between areas or domains, for prefixes that are covered by the summary address range during inter-area or inter-domain summarization. This feature helps in identifying the routers that are facing prefix unreachability issues faster and fix it. The new commands introduced for this feature are: |
|
This feature enables migration of existing SRv6 SID format1 to SRv6 Micro-SIDs (f3216) formats. Earlier, only one format was supported at a time, and you had to choose either format1 or Micro-SID format for the deployment of services. Migration from Full-length SIDs to SRv6 Micro-SIDs was not possible. The hw-module profile segment-routing srv6 mode base-and-micro-segment-f3216 subcommand is introduced under hw-module profile segment-routing srv6 mode. |
|
System Management |
|
Smart Licensing Per Port for Segment Routing-Traffic Engineering |
Cisco Smart Licensing is a cloud-based, flexible software licensing model that enables you to activate and manage Cisco software licenses across your organization. Under the flexible, automated software licensing model, we have Advantage licenses which are required on top of Essential Licenses for ports that use advanced features like L3VPN. This release allows you to allocate the Advantage licenses to the Segment Routing Traffic Engineering (SR-TE) based on the active ports under MPLS or SRV6. Before this release, when you configured SR-TE, all the ports used to consume Advantage licenses. This allows you to manage advantage licenses for SR-TE. |
The following features are supported only on N540-24Q8L2DD-SYS variant.
Feature | Feature |
---|---|
System Management |
|
Y.1564 Service Activation Test in Native Mode |
Y.1564 - Ethernet Service Activation Test (or performance test methodology) is a testing procedure which tests service turn-up, installation, and troubleshooting of Ethernet-based services. This test methodology was created to have a standard way of measuring Ethernet-based services in the industry. This testing procedure is now supported on Cisco N540-24Q8L2DD-SYS routers that are installed and operate in the Native mode. |
Segment Routing |
|
Automated Steering of L3 BGP-based services |
This feature is now supported on Cisco NCS 540 routers. To enable the native mode, use the hw-module profile npu native-mode-enable command in the configuration mode. Ensure that you reload the router after configuring the native mode. |
The following features are supported on all the NCS 540 variants, but not supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
Feature | Feature |
---|---|
System Security |
|
You can now verify whether the router is securely booted up with an authentic Cisco software image. We have introduced a show command to verify the secure boot status of the router. If the software image was tampered with, then the secure boot fails, and the router does not boot up. Before this release, there was no provision on the router to verify the secure boot status. The feature introduces these:
The feature is supported only on the following Cisco NCS 540 router variants:
|
|
Programmability |
|
With the gRPC Network Operations Interface (gNOI) Revision 1.0.0, you can:
You can access the gNOI system RPC messages from the Github repository. |
The following features are supported on N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
Feature | Description |
---|---|
System Security |
|
You now have the flexibility to choose the preferred SSH server authentication methods on the router. These methods include password authentication, keyboard-interactive authentication, and public-key authentication. This feature allows you to selectively disable these authentication methods. By allowing the SSH clients to connect to the server only through these permitted authentication methods, this functionality provides additional security for router access through SSH. Before this release, by default, the SSH server allowed all these authentication methods for establishing SSH connections. The feature introduces these changes:
|
|
Reimage Protection for Routers |
By disallowing USB and PXE boots, this feature aims to prevent the reimage of stolen routers. Such an intervention ensures that attackers can't use the USB or PXE boot facility to erase the existing configuration and boot the stolen router with a fresh IOS Rx image for resale. This feature is supported on the following Cisco NCS 540 router variants:
|
The following feature is supported only on N540X-6Z18G-SYS-A/D router variants.
Feature | Description |
---|---|
Time Division Multiplexing (TDM) |
|
TDM2IP Smart SFP Optics is supported on N540X-6Z18G-SYS-A/D router variants |
TDM2IP Smart SFP Optics is supported on N540X-6Z18G-SYS-A/D router variants. The TPoP and CSoP Smart SFPs enable operators to migrate and integrate their TDM based transport network onto a single technology packet network for both data and TDM transport, which helps to streamline operations and to reduce operational expenditures. |
The following feature is supported on N540X-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, N540X-4Z14G2Q-A/D, N540-6Z14S-SYS-D, and N540-6Z18G-SYS-A/D variants.
Feature | Description |
---|---|
System Security |
|
We now use Integrity Measurement Architecture (IMA) to provide a higher level of trust and runtime security for the routers. With IMA appraisal, you can detect modifications to a file or executable within the router. These modifications could be accidental or malicious, carried out remotely or locally. In addition to logging an integrity violation, the IMA policy also enforces an appraisal by blocking any operation (open or run) for a compromised executable. IMA Enforcement is now introduced on the following Cisco NCS 540 router variants:
|
The following feature is supported only on N540X-12Z16G-SYS-A/D variants.
Feature | Description |
---|---|
System Security |
|
You can now use IP Security (IPSec), a protocol suite that authenticates and encrypts packets of data to provide secure communication over an unprotected network for all management traffic flows between routers. With IPSec, management traffic data is sent across a public network without observation, modification, or spoofing. This feature introduces the following commands:
This feature modifies the tunnel mode command. |
Hardware Introduced
Hardware |
Description |
||
---|---|---|---|
Optics |
This release introduces the following new optics:
|
||
N540-6Z18G-SYS-A/D Routers |
The new N540-6Z18G-SYS-A/D routers are fixed port, one rack unit form-factor, non-conformal coated routers, with security, and QoS features that revolutionize sub-100G routing. An IOS-XR based router, this router extends as Network Interface Device (NID)/Customer Premises Equipment (CPE), with the smallest footprint, ever. The N540-6Z18G-SYS-A/D routers support the following ports:
|
Restrictions and Limitations on the Cisco NCS 540 Series Router
-
Fabric multicast queue stats are not supported in N540X-8Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
-
Unlabeled BGP PIC EDGE for global prefixes is not supported.
-
The show inventory and the show diagnostic commands do not display the fan serial number for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, and N540X-12Z16G-SYS-A/D variants.
-
The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.
-
The hw-module profile mfib statistics command is not supported.
Caveats
Bug ID |
Headline |
---|---|
ADM-MBConfig version reverts back to 2.01 from 2.02 after reload |
IOS XR Base Images and Optional Packages
For more information on system setup and software installation process, see System Setup and Software Installation Guide for Cisco NCS 540 Series Routers.
For general and ordering information see:
-
Cisco Network Convergence System 540 Fronthaul Routers Data Sheet
-
Cisco Network Convergence System 540 Large Density Router Data Sheet
-
Cisco Network Convergence System 540 Medium Density Routers Data Sheet
-
Cisco Network Convergence System 540 Small Density Router Data Sheet
To install the Cisco NCS 540 Series Routers, see Cisco NCS 540 Router Hardware Installation Guide.
Release 7.8.1 Software
The following tables list the supported base images and optional packages and their corresponding file names.
-
The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.
-
The second table lists the supported software for N540-24Q8L2DD-SYS, N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, N540X-16Z8Q2C-D and N540-FH-AGG-SYS variants.
-
The third table lists the supported software for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-6Z18G-SYS-A/D variants.
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540-mini-x-7.8.1.iso |
IOS XR mandatory base image. |
USB Boot Package |
ncs540-usb_boot-7.8.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Manageability |
ncs540-mgbl-1.0.0.0-r781.x86_64.rpm |
Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server |
IOS XR MPLS |
ncs540-mpls-1.0.0.0-r781.x86_64.rpm ncs540-mpls-te-rsvp-1.0.0.0-r781.x86_64.rpm |
Supports MPLS and MPLS Traffic Engineering (MPLS-TE) |
IOS XR Security |
ncs540-k9sec-1.0.0.0-r781.x86_64.rpm |
Supports MACsec and 802.1X |
IOS XR ISIS |
ncs540-isis-1.0.0.0-r781.x86_64.rpm |
Supports ISIS |
IOS XR OSPF |
ncs540-ospf-1.0.0.0-r781.x86_64.rpm |
Supports OSPF |
IOS XR Lawful Intercept |
ncs540-li-1.0.0.0-r781.x86_64.rpm |
Supports Lawful Intercept (LI) |
IOS XR Multicast |
ncs540-mcast-1.0.0.0-r781.x86_64.rpm |
Supports Multicast |
IOS XR EIGRP |
ncs540-eigrp-1.0.0.0-r781.x86_64.rpm |
Supports EIGRP |
IOS XR LI-CTRL |
ncs540-lictrl-1.0.0.0-r781.x86_64.rpm |
Supports LI-CTRL |
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540l-x64-7.8.1.iso |
IOS XR base image with mandatory packages. The base ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-iosxr-7.8.1.tar. |
USB Boot Package |
ncs540l-usb_boot-7.8.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Telnet (xr-telnet) |
NCS540l-iosxr-7.8.1.tar |
Supports Telnet |
IOS XR EIGRP (xr-eigrp) |
NCS540l-iosxr-7.8.1.tar |
Supports EIGRP |
IOS XR CDP (xr-cdp) |
NCS540l-iosxr-7.8.1.tar |
Supports CDP |
IOS XR k9sec (xr-k9sec) |
NCS540l-k9sec-rpms.7.8.1.tar |
Supports 802.1X |
IOS XR RIP (xr-rip) |
NCS540l-iosxr-7.8.1.tar |
Supports RIP |
Base Image |
Filename |
Description |
IOS XR Base Image |
ncs540l-aarch64-7.8.1.iso |
IOS XR base image with mandatory packages. The ISO image also includes the following optional packages:
These optional packages are also included in NCS540l aarch64 iosxr optional rpms-7.8.1.tar. |
USB Boot Package |
ncs540l-aarch64-usb_boot-7.8.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
Optional Packages not included in the base image |
||
Package |
Filename |
Description |
IOS XR Telnet (xr-telnet) |
NCS540l-aarch64-iosxr-optional-rpms-7.8.1.tar |
Supports Telnet |
IOS XR EIGRP (xr-eigrp) |
NCS540l-aarch64-iosxr-optional-rpms-7.8.1.tar |
Supports EIGRP |
IOS XR CDP (xr-cdp) |
NCS540l-aarch64-iosxr-optional-rpms-7.8.1.tar |
Supports CDP |
IOS XR k9sec (xr-k9sec) |
NCS540l-aarch64-k9sec-rpms.7.8.1.tar |
Supports 802.1X |
IOS XR RIP (xr-rip) |
NCS540l-aarch64-iosxr-optional-rpms-7.8.1.tar |
Supports RIP |
Determine Software Version
Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.8.1
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Wed Nov 30 08:33:36 PST 2022
Built Host : iox-lnx-066
Workspace : /auto/srcarchive13/prod/7.8.1/ncs540/ws
Version : 7.8.1
Location : /opt/cisco/XR/packages/
Label : 7.8.1
cisco NCS-540 () processor
System uptime is 3 hours 31 minutes
Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.8.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Wed Nov 30 13:00:28 UTC 2022
Build Host : iox-lnx-069
Workspace : /auto/srcarchive13/prod/7.8.1/ncs540l/ws
Version : 7.8.1
Label : 7.8.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-28Z4C-SYS-A (C3708 @ 1.70GHz) processor with 8GB of memory
ncs540l uptime is 1 hour, 6 minutes
Cisco NCS 540 Series Fixed Router 28x1/10G, 4x100G, AC Chassis
Log in to the router and enter the show version command on the N540X-8Z16G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.8.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Wed Nov 30 13:00:28 UTC 2022
Build Host : iox-lnx-077
Workspace : /auto/srcarchive13/prod/7.8.1/ncs540l-aarch64/ws
Version : 7.8.1
Label : 7.8.1
cisco NCS540L
cisco N540-6Z14S-SYS-D processor with 8GB of memory
ncs540l-aarch64 uptime is 19 minutes
Cisco NCS 540 Series Fixed Router 10x1G, 4xCu, 6x1/10G, DC
Log in to the router and enter the show version command on the N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.8.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Wed Nov 30 13:00:28 UTC 2022
Build Host : iox-lnx-069
Workspace : /auto/srcarchive13/prod/7.8.1/ncs540l/ws
Version : 7.8.1
Label : 7.8.1
cisco NCS540L (D1519 @ 1.50GHz)
cisco N540-24Q8L2DD-SYS (D1519 @ 1.50GHz) processor with 16GB of memory
N540-24Q8L2DD-SYS uptime is 5 minutes
Cisco NCS540 Series, Fixed Router 2x400G, 8x50G, 24x25G Chassis
Log in to the router and enter the show version command on the N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router# show version
Cisco IOS XR Software, Version 7.8.1 LNT
Copyright (c) 2013-2022 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Wed Nov 30 13:00:28 UTC 2022
Build Host : iox-lnx-069
Workspace : /auto/srcarchive13/prod/7.8.1/ncs540l/ws
Version : 7.8.1
Label : 7.8.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-FH-CSR-SYS (C3708 @ 1.70GHz) processor with 8GB of memory
ROUTER uptime is 17 minutes
Cisco NCS 540 FH with 8xCPRI+4xCPRI/10G+8x10G+6x25G+2x100G
Determine Firmware Support
Use the show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be “CURRENT”; Running and Programed version must be the same. The Golden FPDs with “NEED UPGD” can be ignored, the Golden FPDs are not upgradable.
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:
Note |
If the Req Reload field is mentioned as Yes in the output, then it indicates the need for a router reboot for the FPD's latest version to take effect. |
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.26 0.26 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.26 0.26 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LIT-PriMCU-ACFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-ACFW(A) NO 0.07 0.07 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LIT-PriMCU-DCFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-DCFW(A) NO 0.06 0.06 0.0
SDG-PriMCU-DCFW(A) NO 1.03 1.03 0.0
SDG-SecMCU-DCFW(A) NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-X-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.26 0.26 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.26 0.26 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1241.00 1241.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/RP0 N540-24Z8Q2C-M 1.0 MB-MIFPGA CURRENT 0.05 0.05
0/RP0 N540-24Z8Q2C-M 1.0 Bootloader CURRENT 1.16 1.16
0/RP0 N540-24Z8Q2C-M 1.0 CPU-IOFPGA CURRENT 0.10 0.10
0/RP0 N540-24Z8Q2C-M 1.0 MB-IOFPGA CURRENT 0.26 0.26
0/RP0 N540-24Z8Q2C-M 1.0 SATA-M500IT-MU-B CURRENT 4.00 4.00
0/PM0 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM0 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-A/D variants:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.03 2.03 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 ADM_FW CURRENT 14.03 14.03 NOT REQ
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 ADMConfig CURRENT 1.05 1.05 NOT REQ
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 IoFpgaGolden B CURRENT 2.07 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 Primary-BIOS S CURRENT 1.42 1.42 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 StdbyFpga S CURRENT 0.40 0.40 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 StdbyFpgaGolden BS CURRENT 0.40 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 TamFw S CURRENT 4.11 4.11 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 TamFwGolden BS CURRENT 4.11 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-6Z18G-SYS-A/D, and N540X-8Z16G-SYS-A/D variants:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-6Z14S-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-A ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.07 20.07 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.07 20.07 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.07 20.07 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.07 20.07 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 ADMConfig CURRENT 5.03 5.03 NOT REQ
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 IoFpgaGolden B CURRENT 0.15 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 Prim-BootLoader A CURRENT 20.08 20.08 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 StdbyFpga S CURRENT 2.05 2.05 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 StdbyFpgaGolden BS CURRENT 0.33 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-6Z14S-SYS-D 0.2 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.03 2.03 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 ADM-DBConfig CURRENT 2.03 2.03 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 ADM-MBConfig CURRENT 2.02 2.02 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 IoFpgaGolden B CURRENT 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 Primary-BIOS S NOT READY 1.05 1.05 N/A
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 StdbyFpga S CURRENT 2.59 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 3.0 TamFwGolden BS NEED UPGD 0.00 0/RP0
0/PM1 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM1 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.03 2.03 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.42 1.42 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router# show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM1_Config CURRENT 0.09 0.09 NOT REQ
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM2_Config CURRENT 0.09 0.09 NOT REQ
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 DpFpga CURRENT 0.21 0.21 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpga CURRENT 1.30 1.30 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpgaGolden B NEED UPGD 1.23 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 Primary-BIOS SA CURRENT 1.42 1.42 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpga S CURRENT 0.46 0.46 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpgaGolden BS NEED UPGD 0.43 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
0/PM0 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM0 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Important Notes
Supported Transceiver Modules
For more information on the supported transceiver modules, see Transceiver Module Group (TMG) Compatibility Matrix. In the Begin your Search search box, enter the keyword NCS540 and click Enter.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.
The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-7.8.1.tar file.
The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-24Q8L2DD-SYS, N540-FH-AGG-SYS, N540X-16Z8Q2C-D, and N540-FH-CSR-SYS variants is available along with the software image in NCS540l-docs-7.8.1.tar file.
The upgrade document for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-6Z18G-SYS-A/D variants is available along with the software image in NCS540l-aarch64-docs-7.8.1.tar file.
Note |
Quad configurations will be lost when you perform a software downgrade on Cisco NCS 540 Routers that support quad configurations from IOS XR Release 7.5.1 onwards to a release prior to IOS XR Release 7.5.1 due to a non-backward compatibility change. The lost configuration can be applied manually after the downgrade. |
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Related Documentation
The most current Cisco NCS 540 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs-540-series-routers.html