What's New in Cisco IOS XR Release 7.9.1
Cisco IOS XR Release 7.9.1 is a new feature release for Cisco NCS 540 Series routers. For more details on the Cisco IOS XR release model and associated support, see Guidelines for Cisco IOS XR Software.
New in Documentation
This release introduces rich and intuitive ways for you to access YANG data models supported in the Cisco IOS XR software.
| Product | Description |
|---|---|
|
Search by release number, error strings, or compare release numbers to view a detailed repository of error messages and descriptions. |
|
|
Select the MIB of your choice from a drop-down to explore an extensive repository of MIB information. |
|
| YANG Data Models Navigator |
We have launched the tool as an easy reference to view the Data Models (Native, Unified, OpenConfig) supported in IOS XR platforms and releases. You can explore the data model definitions, locate a specific model, and view the containers and their respective lists, leaves, leaf lists, Xpaths, and much more. As we continue to enhance the tool, we would love to hear your feedback. You are welcome to drop us a note here. |
|
Use Case-based Documentation at Learning Labs |
You can now quickly explore and experiment on use-cases without setting up any hardware resources with the new Interactive documentation for Cisco 8000 routers on DevNet Learning Labs. Powered by Jupyter, the automated code blocks within the documentation enable you to configure the desired functionality on the routers and retrieve real-time output swiftly. Check out the new interactive documentation here: |
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
The following features are supported on all the NCS 540 router variants.
| Feature | Description |
|---|---|
|
Segment Routing |
|
|
This feature enables an SRv6 headend node to receive and install remote SIDs with Wide (32-bit) functions (Remote W-LIB). The Remote W-LIB is supported for Layer 3 (VPN/BGP global) and Layer 2 EVPN services (ELINE/ELAN). This capability is enabled by default. |
|
|
SR-TE Explicit Segment Lists with Mix of IPv4 and IPv6 Segments |
Explicit segment list can be configured to include IPv6 segments, for example IPv6 adjacency SIDs or IPv6 EPE SIDs. This feature enables use-cases such as Centralized BGP EPE for 6PE in an SR-MPLS Network. |
|
This feature allows traffic to a BGP service route to be steered over an SR-TE policy using the AS principles, and without imposing the service route’s prefix label. This feature enables use-cases such as centralized BGP EPE for 6PE in an SR-MPLS network. This feature introduces the following command:
|
|
|
This feature enhances the IS-IS Flexible Algorithm link admin group (affinity) constraint to include link colors on links in the reverse direction toward the calculating router. The ability to apply affinity constraints in the reverse direction provides additional control for IS-IS Flexible Algorithm path computation. |
|
|
Interface and Hardware Component |
|
|
With this release, transmitting (Tx) VLAN-tagged LLDP packets on the subinterface is supported. This feature helps to identify unauthorized devices on the network and discover VLANs configured on the network devices. Use the following commands to enable transmitting tagged LLDP packets globally or on each subinterface:
|
|
|
Two-pass forwarding of packets is supported over BVI. In two-pass forwarding model, each packet goes through two ingress and egress processing before reaching the destination. This model helps in implementing additional layer 3 features in BVI interfaces. |
|
|
L2VPN and Ethernet Services |
|
|
Call Admission Control for L2VPN P2P Services over Circuit-Style SR-TE Policies |
This feature allows you to configure guaranteed bandwidth for Layer 2 P2P services steered over Circuit-Style SR-TE policies. This ensures that a Circuit-Style SR-TE policy has sufficient bandwidth to accommodate a Layer 2 P2P service while preventing a Layer 2 P2P service from being steered over a Circuit-Style SR-TE policy when there is insufficient available bandwidth. |
|
This feature provides Layer 2 Protocol Tunneling (L2PT) support for the following extended protocols:
Previously only CPSV (C-CDP, P-PVRST, S-STP, V -VTP) protocol set was supported for L2PT. Now with the extended protocol support, all the Layer 2 Control Protocols (L2CP) are supported with L2PT. This allows different network devices to communicate with each other, with high data security for critical applications. This feature introduces the hw-module profile l2pt ext-protocols-enable command. You must reload the router to activate the command. |
|
|
Modular QoS |
|
|
You can prevent malicious users from staging denial of service (DoS) attacks for non-initial IP by configuring an ACL with fragment match and specifying QoS match actions to rate-limit non-initial fragments for IPv4 traffic. |
|
|
System Management |
|
|
Global Navigation Satellite System (GNSS) MIBs Traps support |
Global Navigation Satellite System (GNSS) is the satellite system which is used as a timing interface. GNSS receiver picks up signals from this satellite system to recalculate position, velocity and local time to high precision. From this release, you can track GNSS module antenna OC alarm status, status of the GNSS satellite visibility (good or bad), and specify the lock status of GNSS module. This release adds the support for the traps:
|
|
Routing |
|
|
The nonself-generated link-state advertisements (LSAs) for a given Open Shortest Path First (OSPF) process is limited to 500000. This protection mechanism prevents routers from receiving many LSAs, preventing CPU failure and memory shortages, and is enabled by default from this release onwards. If you have over 500000 LSAs in your network, configure the max-lsacommand with the expected LSA scale before upgrading to this release or later This feature modifies the following commands:
|
|
|
Limiting the Maximum Redistributed Type-3 LSA Prefixes in OSPF |
By default, the maximum redistributed Type-3 LSA prefixes for a given OSPF process is now limited to 100000. This mechanism prevents OSPF from redistributing a large number of prefixes as Type-3 LSAs and therefore preventing high CPU utilization and memory shortages. Once the number of redistributed prefixes is reached or exceeds the threshold value, the system log message is generated, and no more prefixes are redistributed. |
|
Programmability |
|
|
Cisco-IOS-XR-um-mpls-static-cfg.yang |
This Unified data model enables you to configure Label Switched Paths (LSPs) with statically assigned ingress labels that are mapped to prefixes or VRFs and egress paths explicitly defined or mapped to next hops. With this release, you can use the data model to disable the default route to resolve issues with the next hop information. We recommend that you use the data model according to the CLI hierarchy. |
|
System Security |
|
|
Your routers are now capable of handling the Secure Key Integration Protocol (SKIP) protocol. The SKIP protocol enables your routers to communicate with external quantum devices. With this ability, you can use the Quantum Key Distribution (QKD) devices for exchanging MACsec encryption keys between routers. Using QKD eliminates the key distribution problem in a post quantum world where the current cryptographic systems are no longer secure due to the advent of quantum computers. This feature introduces the following:
For more information on Quantum Key Distribution, see Post Quantum Security Brief. |
|
The following feature is supported only on N540-24Q8L2DD-SYS router variant.
| Feature | Description |
|---|---|
|
System Security |
|
|
IEEE 802.1X Port-Based Authentication Support for Multiple Authentication and Multiple Host Modes |
The IEEE 802.1X port-based authentication allows only authorized supplicants to access the network. The IEEE 802.1X port-based authentication now supports multiple authentication and multiple host modes to allow multiple hosts or MAC addresses on a single port. Applicable to Cisco N540-24Q8L2DD-SYS router variant. |
The following feature is supported on all the NCS 540 variants, but not supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
| Feature | Feature |
|---|---|
|
Programmability |
|
|
|
This Cisco native data model defines the remote attestation of the routers' security posture to assess the trustworthiness of hardware and software on the router. With this release, you can use the data model to send gNMI requests to retrieve the system integrity information such as secure boot status, Attestation Identity Key (AIK), and Secure Unique Device Identifier (SUDI) certificates. gNMI support is introduced for the show platform security attest certificate command. |
The following feature is supported only on N540-28Z4C-SYS-A/D and N540-6Z14S-SYS-D router variants.
| Feature | Description |
|---|---|
|
Time Division Multiplexing (TDM) |
|
|
TDM2IP Smart SFP Optics is supported on N540-28Z4C-SYS-A/D and N540-6Z14S-SYS-D router variants |
TDM2IP Smart SFP Optics is supported on N540-28Z4C-SYS-A/D and N540-6Z14S-SYS-D router variants. The TPoP and CSoP Smart SFPs enable operators to migrate and integrate their TDM based transport network onto a single technology packet network for both data and TDM transport, which helps to streamline operations and to reduce operational expenditures. |
The following feature is supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
| Feature | Description |
|---|---|
|
System Security |
|
|
Securely retrieve dynamic NACM with LDAP over TLS authentication |
You can now securely retrieve the NETCONF Access Control Model (NACM) policies or rules from a remote Lightweight DirectoryAccess Protocol (LDAP) server using Transport Layer Security (TLS) authentication. With TLS authentication, the communication between the router and the LDAP server is encrypted for security. Before this release, the communication between the LDAP server and the router was not secured. |
The following feature is supported on N540-6Z18G-SYS-A/D router variants.
| Feature | Feature |
|---|---|
|
Licensing |
|
|
Support for Flexible Consumption Model on N540-6Z18G-SYS-A/D |
The Flexible Consumption Model (FCM) provides the capability and flexibility to purchase software capacity as needed. FCM delivers the carrier-class IOS-XR software feature set with two software suites, Essentials and Advantage, that simplifies license management. Support for FCM is now extended to the following Cisco NCS 540 variant:
|
Hardware Introduced
The following new optics is supported only on N540-24Q8L2DD-SYS router variant.
|
Hardware |
Description |
|---|---|
|
Optics |
This release launches Coherent 100GE transceiver optics on selective hardware within the product portfolio. For details and other new supported transceivers refer to the Transceiver Module Group (TMG) Compatibility Matrix.
|
Behavior Changes
-
Prior to Cisco IOS XR Release 7.2.1, a segment of an explicit segment list can be configured as an IPv4 address (representing a Node or a Link) using the index indexaddress ipv4 address command.
Starting with Cisco IOS XR Release 7.2.1, an IPv4-based segment (representing a Node or a Link) can also be configured with the new index index mpls adjacencyaddress command. The configuration is stored in NVRAM in the same CLI format used to create it. There is no conversion from the old CLI to the new CLI.
Starting with Cisco IOS XR Release 7.9.1, the old CLI has been deprecated. Old configurations stored in NVRAM will be rejected at boot-up.
As a result, explicit segment lists with IPv4-based segments using the old CLI must be re-configured using the new CLI.
There are no CLI changes for segments configured as MPLS labels using the index index mpls label label command.
-
If you are on a release before Cisco IOS XR Release 7.4.1, you can configure SR-ODN with Flexible Algorithm constraints using the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command.
Starting with Cisco IOS XR Release 7.4.1, you can also configure SR-ODN with Flexible Algorithm constraints using the new segment-routing traffic-eng on-demand color color constraints segments sid-algorithm algorithm-number command.
From Cisco IOS XR Release 7.9.1, the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command is deprecated. Previous configurations stored in NVRAM will be rejected at boot-up.
Hence, for Cisco IOS XR Release 7.9.1, you must reconfigure all SR-ODN configurations with Flexible Algorithm constraints that use the on-demand dynamic sid-algorithm with the on-demand constraints command.
Restrictions and Limitations on the Cisco NCS 540 Series Router
-
Fabric multicast queue stats are not supported in N540X-8Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
-
Unlabeled BGP PIC EDGE for global prefixes is not supported.
-
The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The 1G ports on the N540-24Q8L2DD-SYS variant do not support Auto-Negotiation with 1GE optical SFPs.
-
Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.
-
The hw-module profile mfib statistics command is not supported.
Caveats
|
Bug ID |
Headline |
|---|---|
|
BVI 2-pass: MTU fragmentation is not working for L3-L2 BVI traffic |
IOS XR Base Images and Optional Packages
For more information on system setup and software installation process, see System Setup and Software Installation Guide for Cisco NCS 540 Series Routers.
For general and ordering information see:
-
Cisco Network Convergence System 540 Fronthaul Routers Data Sheet
-
Cisco Network Convergence System 540 Large Density Router Data Sheet
-
Cisco Network Convergence System 540 Medium Density Routers Data Sheet
-
Cisco Network Convergence System 540 Small Density Router Data Sheet
To install the Cisco NCS 540 Series Routers, see Cisco NCS 540 Router Hardware Installation Guide.
Release 7.9.1 Software
The following tables list the supported base images and optional packages and their corresponding file names.
-
The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.
-
The second table lists the supported software for N540-24Q8L2DD-SYS, N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, N540X-16Z8Q2C-D and N540-FH-AGG-SYS variants.
-
The third table lists the supported software for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants.
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540-mini-x-7.9.1.iso |
IOS XR mandatory base image. |
|
USB Boot Package |
ncs540-usb_boot-7.9.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Manageability |
ncs540-mgbl-1.0.0.0-r791.x86_64.rpm |
Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server |
|
IOS XR MPLS |
ncs540-mpls-1.0.0.0-r791.x86_64.rpm ncs540-mpls-te-rsvp-1.0.0.0-r791.x86_64.rpm |
Supports MPLS and MPLS Traffic Engineering (MPLS-TE) |
|
IOS XR Security |
ncs540-k9sec-1.0.0.0-r791.x86_64.rpm |
Supports MACsec and 802.1X |
|
IOS XR ISIS |
ncs540-isis-1.0.0.0-r791.x86_64.rpm |
Supports ISIS |
|
IOS XR OSPF |
ncs540-ospf-1.0.0.0-r791.x86_64.rpm |
Supports OSPF |
|
IOS XR Lawful Intercept |
ncs540-li-1.0.0.0-r791.x86_64.rpm |
Supports Lawful Intercept (LI) |
|
IOS XR Multicast |
ncs540-mcast-1.0.0.0-r791.x86_64.rpm |
Supports Multicast |
|
IOS XR EIGRP |
ncs540-eigrp-1.0.0.0-r791.x86_64.rpm |
Supports EIGRP |
|
IOS XR LI-CTRL |
ncs540-lictrl-1.0.0.0-r791.x86_64.rpm |
Supports LI-CTRL |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-x64-7.9.1.iso |
IOS XR base image with mandatory packages. The base ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-iosxr-7.9.1.tar. |
|
USB Boot Package |
ncs540l-usb_boot-7.9.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-iosxr-7.9.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-iosxr-7.9.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-iosxr-7.9.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-k9sec-rpms.7.9.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-iosxr-7.9.1.tar |
Supports RIP |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-aarch64-7.9.1.iso |
IOS XR base image with mandatory packages. The ISO image also includes the following optional packages:
These optional packages are also included in NCS540l aarch64 iosxr optional rpms-7.9.1.tar. |
|
USB Boot Package |
ncs540l-aarch64-usb_boot-7.9.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-aarch64-iosxr-optional-rpms-7.9.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-aarch64-iosxr-optional-rpms-7.9.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-aarch64-iosxr-optional-rpms-7.9.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-aarch64-k9sec-rpms.7.9.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-aarch64-iosxr-optional-rpms-7.9.1.tar |
Supports RIP |
Determine Software Version
Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.9.1
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Apr 2 01:22:32 PDT 2023
Built Host : iox-ucs-030
Workspace : /auto/srcarchive15/prod/7.9.1/ncs540/ws
Version : 7.9.1
Location : /opt/cisco/XR/packages/
Label : 7.9.1
cisco NCS-540 () processor
System uptime is 5 hours 09 minutes
Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.9.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Apr 02 06:50:19 UTC 2023
Build Host : iox-ucs-043
Workspace : /auto/srcarchive15/prod/7.9.1/ncs540l/ws
Version : 7.9.1
Label : 7.9.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540X-16Z4G8Q2C-A (C3708 @ 1.70GHz) processor with 8GB of memory
EG-PE4 uptime is 3 hours 45 minutes
Cisco NCS 540 System with 16x10G+4x1GCu+8x25G+2x100G DC
Log in to the router and enter the show version command on the N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-6Z18G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.9.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Apr 02 06:50:19 UTC 2023
Build Host : iox-ucs-045
Workspace : /auto/srcarchive15/prod/7.9.1/ncs540l-aarch64/ws
Version : 7.9.1
Label : 7.9.1
cisco NCS540L
cisco N540X-6Z18G-SYS-A processor with 8GB of memory
R13-Darwin-CE1 uptime is 2 hours 54 minutes
Cisco NCS 540 Series Fixed Router 18x1G, 6x1/10G, AC
Log in to the router and enter the show version command on the N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.9.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Apr 02 06:50:19 UTC 2023
Build Host : iox-ucs-043
Workspace : /auto/srcarchive15/prod/7.9.1/ncs540l/ws
Version : 7.9.1
Label : 7.9.1
cisco NCS540L (D1519 @ 1.50GHz)
cisco N540-24Q8L2DD-SYS (D1519 @ 1.50GHz) processor with 16GB of memory
R18_PE9_Arches uptime is 3 hours 18 minutes
Cisco NCS540 Series, Fixed Router 2x400G, 8x50G, 24x25G Chassis
Log in to the router and enter the show version command on the N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.9.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : ingunawa
Built On : Sun Apr 02 06:50:19 UTC 2023
Build Host : iox-ucs-043
Workspace : /auto/srcarchive15/prod/7.9.1/ncs540l/ws
Version : 7.9.1
Label : 7.9.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-FH-CSR-SYS (C3708 @ 1.70GHz) processor with 8GB of memory
R16_PE8_Jaguar uptime is 2 hours 45 minutes
N540-FH-CSR-SYS
Determine Firmware Support
Use the show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be “CURRENT”; Running and Programed version must be the same. The Golden FPDs with “NEED UPGD” can be ignored, the Golden FPDs are not upgradable.
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:
 Note |
If the Req Reload field is mentioned as Yes in the output, then it indicates the need for a router reboot for the FPD's latest version to take effect. |
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
--------------------------------------------------------------------------------
N540-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LIT-PriMCU-ACFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-ACFW(A) NO 0.07 0.07 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LIT-PriMCU-DCFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-DCFW(A) NO 0.06 0.06 0.0
SDG-PriMCU-DCFW(A) NO 1.03 1.03 0.0
SDG-SecMCU-DCFW(A) NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-X-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/RP0 N540-ACC-SYS 1.0 MB-MIFPGA CURRENT 0.05 0.05
0/RP0 N540-ACC-SYS 1.0 Bootloader CURRENT 1.16 1.16
0/RP0 N540-ACC-SYS 1.0 CPU-IOFPGA CURRENT 0.10 0.10
0/RP0 N540-ACC-SYS 1.0 MB-IOFPGA CURRENT 0.27 0.27
0/RP0 N540-ACC-SYS 1.0 SATA-M500IT-MU-B CURRENT 4.00 4.00
0/PM0 N540-PWR400-A 1.256 LIT-PriMCU-ACFW CURRENT 0.04 0.04
0/PM0 N540-PWR400-A 1.256 LIT-SecMCU-ACFW CURRENT 0.07 0.07
0/PM1 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.04 2.04 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 ADM_FW CURRENT 14.03 14.03 NOT REQ
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 ADMConfig CURRENT 1.05 1.05 NOT REQ
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 IoFpgaGolden B CURRENT 2.03 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 Primary-BIOS SA CURRENT 1.46 1.46 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpga S CURRENT 0.40 0.40 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFw S CURRENT 4.11 4.11 0/RP0
0/RP0/CPU0 N540X-16Z4G8Q2C-A 0.2 TamFwGolden BS NEED UPGD 0.00 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-8Z16G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-6Z14S-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-A ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 ADMConfig NEED UPGD 1.02 1.02 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 IoFpgaGolden B NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 Prim-BootLoader A CURRENT 20.08 20.08 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 StdbyFpga S CURRENT 2.05 2.05 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540X-6Z18G-SYS-A 0.2 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.04 2.04 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 ADM-DBConfig NEED UPGD 1.51 1.51 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 ADM-MBConfig CURRENT 2.02 2.02 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 IoFpgaGolden B NEED UPGD 2.10 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 Primary-BIOS S CURRENT 4.06 4.06 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 SsdSAMSA64G3 S CURRENT 12.41 12.41 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 StdbyFpga S CURRENT 2.59 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 StdbyFpgaGolden BS NEED UPGD 0.00 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 2.0 TamFwGolden BS NEED UPGD 0.00 0/RP0
0/PM0 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM0 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-FH-CSR-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.04 2.04 0.0
ADM-MBConfig NO 2.02 2.02 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.06 4.06 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.22 0.22 0.0
DpFpgaEth YES 1.20 1.20 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.21 0.21 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM1_Config CURRENT 0.09 0.09 NOT REQ
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 ADM2_Config CURRENT 0.09 0.09 NOT REQ
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 DpFpga CURRENT 0.21 0.21 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpga CURRENT 1.30 1.30 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 IoFpgaGolden B NEED UPGD 1.13 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 Primary-BIOS SA CURRENT 1.46 1.46 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpga S CURRENT 0.46 0.46 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 StdbyFpgaGolden BS NEED UPGD 0.42 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-FH-CSR-SYS 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
0/PM1 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM1 N540-PWR400-A 0.0 SecMCU NEED UPGD 1.02 1.02 NOT REQ
Important Notes
Supported Transceiver Modules
For more information on the supported transceiver modules, see Transceiver Module Group (TMG) Compatibility Matrix. In the Begin your Search search box, enter the keyword NCS540 and click Enter.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.
The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-7.9.1.tar file.
The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-24Q8L2DD-SYS, N540-FH-AGG-SYS, N540X-16Z8Q2C-D, and N540-FH-CSR-SYS variants is available along with the software image in NCS540l-docs-7.9.1.tar file.
The upgrade document for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants is available along with the software image in NCS540l-aarch64-docs-7.9.1.tar file.
Note |
Quad configurations will be lost when you perform a software downgrade on Cisco NCS 540 Routers that support quad configurations from IOS XR Release 7.5.1 onwards to a release prior to IOS XR Release 7.5.1 due to a non-backward compatibility change. The lost configuration can be applied manually after the downgrade. |
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco NCS 540 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs-540-series-routers.html
Feedback