Use this document with documents listed in Related Documentation.
January 9, 2020 |
Added CSCvs50998 to the list of known caveats. |
December 12, 2019 |
Updated the deployment mode for Cisco Nexus 9200 Series switch. |
December 10, 2019 |
Cisco NDB Hardware and Software Interoperability Matrix
Obtaining Documentation and Submitting a Service Request
Cisco Nexus Data Broker (NDB) with Cisco Nexus Switches provides a software-defined, programmable solution to aggregate copies of network traffic using SPAN or network taps for monitoring and visibility. As opposed to traditional network taps and monitoring solutions, this packet-brokering approach offers a simple, scalable and cost-effective solution well-suited for customers who need to monitor higher-volume and business-critical traffic for efficient use of security, compliance, and application performance monitoring tools.
Cisco NDB also provides a software-defined, programmable solution to perform inline inspection of the network traffic for monitoring and visibility purpose. Inline traffic inspection is performed on specific traffic by redirecting it through multiple security tools before it enters or exits a network.
This section lists the new and changed software features in Cisco Nexus Data Broker Release 3.8.1:
§ Remote source enhancements to use physical L3 interface
§ NX-API support for slice
§ Sorting of members in the port-group
§ Sorting/filtering of default connections based on the installation status
This section lists guidelines and limitations for features in Cisco Nexus Data Broker Release 3.8.1:
§ Cisco NDB Openflow embedded is not supported on Cisco Nexus 3000/9000 series switches running 7.0(3)I6.1 and 7.0(3)I7.1 NXOS image.
§ Dry Run feature is disabled by default. To enable this feature, see Cisco NDB Configuration Guide.
§ Default deny ACL on all ports and Default ISL deny ACL on ISL ports is enabled by default for Cisco NDB ,Release 3.6 and later releases. To disable this feature, refer the Cisco Nexus Data Broker Configuration Guide, Release 3.8 or Cisco Nexus Data Broker Deployment Guide, Release 3.8.
§ By default, NDB cluster URL is https://<NDBIP>:8443.
§ NDB supports Google Chrome version 45.x and later, FireFox version 45.x and later, and Internet Explorer version 11 and later.
§ The switchport mode trunk and spanning-tree bpdufilter enable command should be enabled for all switch ports on all Cisco NDB managed switches.
§ Cisco Nexus switches managed by Cisco NDB in NX-API mode must have LLDP feature enabled. Disabling LLDP may cause inconsistencies and require switch rediscovery for NX-API switches
§ For secured communication between Cisco NDB and switch through HTTPS, start Cisco NXB in TLS mode for the first time only. Subsequent Cisco NDB restarts does not require TLS mode. For more details, refer to Cisco Nexus Data Broker Configuration Guide.
§ The TLS KeyStore and TrustStore passwords are sent to the Cisco Nexus Data Broker so it can read the password-protected TLS KeyStore and TrustStore files only through HTTPS.
./xnc config-keystore-passwords [--user {user} --password {password} --url {url} --verbose --prompt --keystore-password {keystore_password} --truststore-password {truststore_password}.
Here default URL to be - https://Nexus_Data_Broker_IP:8443
§ For the Cisco NDB cluster deployment, the roundtrip delay between the cluster nodes should be less than 50 milliseconds. If the round trip delay is more, the Cisco NDB cluster behavior is unpredictable and inconsistent.
§ Cisco Nexus 92XX devices does not support the QnQ, you cannot use this switch in the Multi switch environment.
§ A Cisco NDB instance can support either the OpenFlow or NX-API configuration mode, it does not support both configuration modes in the same Cisco NDB instance.
§ VLAN based IP filtering is not supported for Nexus Series switch with NX-OS Release 7.0(3)I6.1. Hence, the filtering fails when you filter the traffic for the following series of switches: 92160YC-X,92300YC, 9272Q, 92304Q, and 9236C.
§ Do not configure TACACS on the Cisco NDB switches. You can configure it only for authentication and authorization. It is not to be used for accounting.
§ For Cisco NDB Release 3.7, Cisco NX-OS Release 7.0(3)I5(1), 7.0(3)I5(2), and 7.0(3)I7(2) are not recommended for NX-API deployment and Cisco NX-OS Release 7.0(3)I5(1) and 7.0(3)I5(2) are not recommended OpenFlow deployments.
§ Cisco NDB Embedded will be supported on NX-OS 7.0(I4).1 onwards, and 7.0(3)I6.1 onwards. For more information, see the Nexus Data Broker Hardware and Software Interoperability Matrix section.
The following features are not supported in the embedded deployment mode of Cisco Nexus Data Broker:
§ Adding another NDB device
§ Adding APIC for ACI SPAN session
§ Adding production device for the SPAN session
§ Configuring SPAN session
§ Configuring copy device
§ Configuring copy sessions
§ Scheduling Configuration Backup
§ NDB High availability is not supported
§ TLS communication between the NDB controller and the switches is not supported
§ Secured communication between the browser and NDB controller is not supported
Cisco Nexus Data Broker, Release 3.8.1 supports the following operating systems for the fully visibility software sensors:
Device Model |
Cisco Nexus Data Broker Minimum Version |
Supported Deployment Mode |
Supported Use Cases |
Cisco Nexus 3000 Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation and In-line redirection |
Cisco Nexus 3100 Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation and In-line redirection |
Cisco Nexus 3164Q Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 3200 Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation only In-line redirection |
Cisco Nexus 3500 Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9200 Series Switch |
Cisco Nexus Data Broker 3.1 or later |
Centralized and Embedded Note: Cisco Nexus 9200 Series switches support only one switch deployment. |
Tap/SPAN aggregation only |
Cisco Nexus 9300 Series Switch |
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation and In-line redirection |
Cisco Nexus 9300-EX Series Switch |
Cisco Nexus Data Broker 3.1 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9300-FX Series Switch |
Cisco Nexus Data Broker 3.5 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9332C Series Switch |
Cisco Nexus Data Broker 3.8 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9364C Series Switch |
Cisco Nexus Data Broker 3.8 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9500 Series Switch Supported Modules: § N9K-X9464TX
|
Cisco Nexus Data Broker 3.0 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9500-EX Series Switch Supported Modules: § N9K-X97160YC-EX § N9K-X9732C-EX
|
Cisco Nexus Data Broker 3.5 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 9500-FX Series Switch |
Cisco Nexus Data Broker 3.5 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
Cisco Nexus 31100 Series Switch |
Cisco Nexus Data Broker 3.7 or later |
Centralized and Embedded |
Tap/SPAN aggregation and In-line redirection |
Cisco Nexus 9300-FX2 Series Switch |
Cisco Nexus Data Broker 3.7 or later |
Centralized and Embedded |
Tap/SPAN aggregation only |
The following table lists the hardware and software interoperability matrix for Cisco NDB, Release 3.8.1:
Nexus Switch Model(s) |
Implementation Tyoe |
Supported NX-OS Versions |
OpenFlow Agent |
3048/3064/3172 |
OpenFlow |
6.0(2)U6(x), I2(x), and I3(x) |
1.1.5 |
3048/3064/3172 |
OpenFlow |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
2.14 |
3046/3064 |
NX-API |
6.0(2)U6(x), 7.0(3)I4(1) to 7.0(3)I4(8b) |
Not supported |
3172 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) to 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
3164 |
OpenFlow |
Not supported |
Not supported |
3164 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
3232 |
OpenFlow |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
2.14 |
3232 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
3548 |
OpenFlow |
6.0(2)A6(x) and 6.0(2)A8(x). I7(5) and I7(5a), and 9.3(1) (OF agent is not required) 7.0(3)I7(2) to 7.0(3)I7(6) |
1.1.5 |
3548 |
NX-API |
Not supported |
Not supported |
92160/92304 |
OpenFlow |
Not supported |
Not supported |
92160/92304 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
9372/9396/93128 |
OpenFlow |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
2.14 |
9372/9396/93128 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
9364C/9332C
|
NX-API |
9.2(3) to 9.2(4) and 9.3(1) to 9.3(5), 9.3(7) |
NA |
9364C/9332C |
OpenFlow |
Not supported |
Not supported |
93180LC-EX / 93108TC-EX / 93180YC-EX |
OpenFlow |
Not supported |
Not supported |
93180LC-EX / 93108TC-EX / 93180YC-EX |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
NA |
93108TC-FX / 93180YC-FX |
OpenFlow |
Not supported |
Not supported |
93108TC-FX / 93180YC-FX |
NX-API |
7.0(3)I7(1) to 7.0(3)I7(6), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
9504/9508/9516 |
OpenFlow |
Not supported |
Not supported |
9504/9508/9516 |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(2) |
Not applicable |
31108TC-V / 31108PC-V |
NX-API |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7)) |
Not applicable |
31108TC-V / 31108PC-V |
OpenFlow |
7.0(3)I4(1) to 7.0(3)I4(9), 7.0(3)I6(1), 7.0(3)I7(2) ) to 7.0(3)I7(7), 7.0(3)I7(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
9336C-FX2 / 93240YC-FX2 |
NX-API |
7.0(3)I7(5), 7.0(3)I7(5a), 7.0(3)I7(6), 7.0(3)17(9), 9.2(1) to 9.2(4), 9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
N9K-C93360YC-FX2 |
NX-API |
9.3(1) to 9.3(5), 9.3(7) |
Not applicable |
The following table lists the APIC versions supported on Cisco NDB for Release 3.8.1:
APIC Version |
Cisco NDB (Minimium Version) |
Supported Deployment Mode |
1.1, 1.2 and 2.0 |
NDB 3.0 |
Centralized only |
2.X |
NDB 3.1 and above |
Centralized only |
4.X |
NDB 3.7 and above |
Centralized only |
The following table lists the scalability limits for centralized deployment on Cisco:
Description |
Small |
Medium |
Large |
Number of switches used for Tap and SPAN aggregation |
25 |
50 |
75 |
Note: All caveats listed in this document are those that were reported against the Cisco NDB.
This section includes the following topics:
The following table lists the Resolved Caveat in Release 3.8.1 Click the bug ID to access the Bug Search tool and see additional information about the bug.
Bug ID |
Description |
Unable to configure ports/connections after creating slice user. |
The following table lists the open caveats in the Cisco Release 3.8.1 Click the bug ID to access the Bug Search tool and see additional information about the bug.
Bug ID |
Description |
Direction change should be supported while editing span session. |
|
Port configuration fails while importing the json file with unsupported characters in the description. |
|
Export operation does not retrieve Node specific configuration. |
|
Limitations in uploading a configuration that has redirections (bi-directional). |
|
NDB Server backup entries are not shown in the UI after the upgrade. |
|
“Could not commit transaction” exception thrown at NDB. |
|
Connection in failed state post upgrading NDB from 2.x, 3.0 and 3.1 to 3.8.1 and above. |
|
Slice is not compatible with Auxiliary devices, Swagger APIs, and Span Management (ACI/PS) |
The following table lists the known caveats from the previous releases. Click the bug ID to access the Bug Search tool and see additional information about the bug.
Bug ID |
Description |
Can't match MAC address in IP packet, it will hit deny any any in IP ACLs. |
|
Need Error handling for feature SFLOW with ERSPAN destination since they are mutually exclusive. |
|
TapAgg: MPLS traffic with TTL=0 gets flooded without MPLS label being stripped off. |
|
MPLS tapagg should allow deny ace without redirection option. |
|
Openflow - Portchannel links are not seen on NDB, Release 2.1. |
|
Connections are not matched with the VLAN ID of source ports on ISL links with an IPv6 filter. |
|
Disk space not reclaimed in switch I7.x versions while uninstalling Embedded NDB. |
|
IP ACL with UDF match removes internal VLAN tag in Cisco NX-OS Release 9.3(2). |
|
Re-direct STP, CDP packets similar to LLDP port for Openflow. |
|
After device reload guestshell activation fails due to low memory on devices for NXOS 9.x.x version. |
|
IP/GRE traffic not matching TapAgg ACL in 9.2(3). |
|
After an upgrade the odd vlan-id numbers are written incorrectly in TCAM 9.3(3). |
|
Not able to convert Layer 2 ports to layer 3 in 9.3(3). |
|
ACL with HTTP tcp-option-length redirect statement are not matching traffic correctly in 9.3(3). |
|
ERSPAN Dest doesn't work when L2 port with mode tap-aggregation is converted to L3 port in 9.3(3). |
|
After reloading switch N9372PX-118 in GS it takes more time to send interface details to NDB server. |
|
9508/9516-with 4k VLAN scale modules go to powered down state when upgrading to 9.3.3 and above. |
|
After device reload guestshell activation fails due to low memory on devices for NXOS 9.3(5) version. |
|
Dot1q-tunnel(QinQ) is not programmed correctly for port-channel members in NXOS 9.3(5). |
|
Not seeing timestamptag on interface after configuring the cmds on C9504 platform in nxos 9.3.7. |
|
Username is shown as 'guestshell' irrespective of user executes the guestshell. |
The entire Cisco NDB documentation set is available at the following URL:
For information on obtaining documentation and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
https://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Open a service request online at:
https://tools.cisco.com/ServiceRequestTool/create/launch.do
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2019 Cisco Systems, Inc. All rights reserved.