Release Notes for Cisco NCS 1002, IOS XR Release 7.3.1

First Published: February 28, 2021

Last Updated: December 14, 2022

What's New in Cisco IOS XR Release

Cisco is continuously enhancing the product with every release and this section covers a brief description of key features and enhancements. It also includes links to detailed documentation, where available.


Feature	Description
Configuration
10sec PM buckets	Performance monitoring parameters for the Optics, Ethernet, and Coherent DSP controllers in 10 second intervals are available. This new bucket for performance monitoring allows you to gather, store, and report performance data with higher granularity. Commands modified: pm controller optics controller GigECtrlr controller coherentDSP show controllers
Data Models
NETCONF Support for READ, WRITE, and Execute or Administrative Commands.	Support for IPv4 and IPv6 Ping test using the Cisco-IOS-XR-ping-act YANG model, instead of using CLI commands, is available. RPC (Remote Procedure Call) Request and Response messages are used to do the ping test, which is automated using scripts. This enables you to perform the ping test in a less time-consuming manner and to enhance network scalability.
OC (Open Configuration) Model for Client FEC and Laser Squelch	The OC model for configuring client FEC and Laser Squelch is available. This feature enables you to perform the configuration using scripts, which is less time-consuming. Also, the Open Configuration model supports the use of vendor-neutral data models to configure and manage the network.
OC (Open Configuration) Terminal Device Revision	The Open Configuration terminal device revision to 1.7.2 allows you to provide LLDP support on the client optics. This feature allows you to learn LLDP neighbors and the topology of the devices for Operations, Administration, and Maintenance (OAM) purposes.

Caveats

Open Caveats

Table 1. Open Caveats
Caveat ID Number	Description
CSCvx36865	tamd_proc crashes after admin reload
CSCvw34282	Optics Controller does not show the admin state disable when the optics is shutdown

Bug Search Tool

Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.

Supported Packages and System Requirements

Release 7.3.1 Packages

Table 2. Release 7.3.1 Packages
Feature Set	Filename	Description
Composite Package
Cisco IOS XR Core Bundle + Manageability Package	ncs1k-iosxr-px-k9-7.3.1.tar	Contains required core packages, including operating system, Admin, Base, Forwarding, SNMP Agent, FPD, and Alarm Correlation and Netconf-yang, Telemetry, Extensible Markup Language (XML) Parser, HTTP server packages.
Individually Installable Optional Packages
Cisco IOS XR Security Package	ncs1k-k9sec-3.1.0.0-r731.x86_64.rpm (part of ncs1k-iosxr-px-k9-7.3.1.tar)	Support for Encryption, Decryption, IP Security (IPsec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI).

See Install Packages.

System Requirements

Memory Configuration

At least 16 GB RAM

Determine Software Version

RP/0/RP0/CPU0:ios#sh version 
Thu Feb 25 15:10:05.161 IST
Cisco IOS XR Software, Version 7.3.1.47I
Copyright (c) 2013-2021 by Cisco Systems, Inc.

Build Information:
Built By     : ingunawa
Built On     : Fri Feb 19 23:55:25 PST 2021
Built Host   : iox-lnx-068
Workspace    : /auto/iox-lnx-068-san1/prod/7.3.1.47I.SIT_IMAGE/ncs1k/ws
Version      : 7.3.1.47I
Location     : /opt/cisco/XR/packages/
Label        : 7.3.1.47I

cisco NCS-1002 () processor
System uptime is 2 days 22 hours 9 minutes

Determine Firmware Support

RP/0/RP0/CPU0:ios#show hw-module fpd 
Wed Feb 10 19:35:29.371 IST

Auto-upgrade:Disabled
                                                               FPD Versions
                                                               =================
Location   Card type             HWver FPD device       ATR Status   Running Programd
-----------------------------------------------------------------------------------
0/0        NCS1002-K9            1.2   CDSP_PORT_05         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_06         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_12         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_13         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_19         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_20         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_26         CURRENT    3.77    3.77  
0/0        NCS1002-K9            1.2   CDSP_PORT_27         CURRENT    3.77    3.77  
0/0        NCS1002-K9            2.0   CFP2_PORT_05         CURRENT    4.40    4.40  
0/0        NCS1002-K9            2.1   CFP2_PORT_06         CURRENT    5.52    5.52  
0/0        NCS1002-K9            2.1   CFP2_PORT_12         CURRENT    5.52    5.52  
0/0        NCS1002-K9            0.0   CFP2_PORT_13         CURRENT    1.01    1.01  
0/0        NCS1002-K9            2.1   CFP2_PORT_19         CURRENT    5.52    5.52  
0/0        NCS1002-K9            2.1   CFP2_PORT_20         CURRENT    5.52    5.52  
0/0        NCS1002-K9            4.2   CFP2_PORT_26         CURRENT    3.20    3.20  
0/0        NCS1002-K9            2.1   CFP2_PORT_27         CURRENT    5.52    5.52  
0/0        NCS1002-K9            0.1   CTRL_BKP_LOW     B   CURRENT            2.23  
0/0        NCS1002-K9            0.1   CTRL_BKP_UP      B   CURRENT            2.23  
0/0        NCS1002-K9            0.1   CTRL_FPGA_LOW        CURRENT    2.23    2.23  
0/0        NCS1002-K9            0.1   CTRL_FPGA_UP         CURRENT    2.23    2.23  
0/RP0      NCS1K-CNTLR           0.1   BIOS_Backup      BS  CURRENT           15.10  
0/RP0      NCS1K-CNTLR           0.1   BIOS_Primary      S  CURRENT   15.10   15.10  
0/RP0      NCS1K-CNTLR           0.1   Daisy_Duke_BKP   BS  CURRENT            0.20  
0/RP0      NCS1K-CNTLR           0.1   Daisy_Duke_FPGA   S  CURRENT    0.20    0.20  
0/PM0      NCS1K-2KW-AC          0.0   PO-PriMCU            CURRENT    4.00    4.00  
0/PM1      NCS1K-2KW-AC          0.0   PO-PriMCU            CURRENT    4.00    4.00         
RP/0/RP0/CPU0:ios#sh version 
Wed Feb 10 19:35:38.274 IST
Cisco IOS XR Software, Version 7.3.1.45I
Copyright (c) 2013-2021 by Cisco Systems, Inc.

Build Information:
 Built By     : ingunawa
 Built On     : Tue Feb  9 11:45:12 PST 2021
 Built Host   : iox-lnx-068
 Workspace    : /auto/iox-lnx-068-san1/prod/7.3.1.45I.SIT_IMAGE/ncs1k/ws
 Version      : 7.3.1.45I
 Location     : /opt/cisco/XR/packages/
 Label        : 7.3.1.45I

cisco NCS-1002 () processor
System uptime is 3 hours 37 minutes

Other Important Information

Mandatory Upgrade Notes

Please read the following before upgrading the software to Release 7.3.1.

Disable auto FPD upgrade before upgrading the software from Release 6.3.x, Release 6.5.x, Release 7.0.1, and Release 7.1.1 to Release 7.2.1.

Supported MIBs

The following MIBs are supported in NCS 1002:

CISCO-CONFIG-MAN-MIB
CISCO-FLASH-MIB
CISCO-ENTITY-REDUNDANCY-MIB
CISCO-SYSTEM-MIB
CISCO-ENTITY-ASSET-MIB
EVENT-MIB
DISMAN-EXPRESSION-MIB
CISCO-FTP-CLIENT-MIB
NOTIFICATION-LOG-MIB
CISCO-RF-MIB
RADIUS-AUTH-CLIENT-MIB
RADIUS-ACC-CLIENT-MIB
IEEE8023-LAG-MIB
CISCO-TCP-MIB
UDP-MIB
CISCO-BULK-FILE-MIB
CISCO-CONTEXT-MAPPING-MIB
CISCO-OTN-IF-MIB
CISCO-ENHANCED-MEMPOOL-MIB
CISCO-PROCESS-MIB
CISCO-SYSLOG-MIB
ENTITY-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-IF-EXTENSION-MIB
RMON-MIB
CISCO-OPTICAL-MIB
CISCO-ENTITY-SENSOR-MIB
LLDP-MIB
CISCO-ALARM-MIB