The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This section contains the following:
This appendix provides router and modem information for the IR1101 series.
Complete specifications for the IR1101 series can be found in the marketing data sheet.
 Note |
Complete Regulatory Compliance and Safety Information is found online. |
 Caution |
Operating the router outside of the limits specified is not supported. |
The following table lists the Base Unit specifications:
|
Description |
Design Specification |
||||||
|---|---|---|---|---|---|---|---|
|
Dimensions |
Inches: 2.3 (H) x 5.2 (W) x 4.9 (D) Millimeters: 58.4 (H) x 132.0 (W) x 124.5 (D) |
||||||
|
Weight |
2.25 lbs. |
||||||
|
Ingress Protection Rating |
IP 30 |
||||||
|
Humidity |
Non-condensing Relative Humidity: 5% to 95% |
||||||
|
Standard Safety Certifications |
UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN 60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition with all group differences and national deviations. |
||||||
|
Operating Temperature and Altitude on the Base IR1101 with P-LTE-xx and P-LTE-xxx Pluggables using WP7600 Series Modems.
|
-40° to 140°F (-40° to 60°C) in a sealed NEMA cabinet with no airflow -40° to 158°F (-40° to 70°C) in a vented cabinet with 40 LFM of air -40° to 167°F (-40° to 75°C) in a forced air enclosure with 200 LFM of air (type tested at +85°C for 16 hours).
|
||||||
|
Input Voltage |
Nominal voltage: 12V to 48V DC Min/Max voltage: 9.6V to 60V DC input |
||||||
|
Typical Current |
12V - 0.72A 24V - 0.36A 59.8V - 0.17A |
||||||
|
Typical/Maximum Power Consumption |
Without LTE Pluggable: Typical 7.7W, Maximum 10W. With LTE Pluggable: Typical 10W, Maximum 13W. |
The following table lists the Expansion Unit specifications:
|
Description |
Design Specification |
||||
|---|---|---|---|---|---|
|
Dimensions |
Inches: 1.3 (H) x 5.2 (W) x 4.9 (D) Millimeters: 33.0 (H) x 132.0 (W) x 124.5 (D) |
||||
|
Weight |
1.6 lbs. |
||||
|
Ingress Protection Rating |
IP 30 |
||||
|
Humidity |
Non-condensing Relative Humidity: 5% to 95% |
||||
|
Standard Safety Certifications |
UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN 60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition with all group differences and national deviations. |
||||
|
Operating Temperature and Altitude on the Expansion IRM-1100 with P-LTE-xx and P-LTE-xxx Pluggables utilizing WP7600 Series Modems.
|
-40° to 140°F (-40° to 60°C) in a sealed NEMA cabinet with no airflow -40° to 158°F (-40° to 70°C) in a vented cabinet with 40 LFM of air -40° to 167°F (-40° to 75°C) in a forced air enclosure with 200 LFM of air (type tested at +85°C for 16 hours)
|
The following table lists the Expansion Unit specifications:
|
Description |
Design Specification |
|---|---|
|
Dimensions |
13.3cm W x 12.35cm L x 6.0cm H |
|
Weight |
1.6 lbs. |
|
Ingress Protection Rating |
IP30 Chassis. Class A EMC or better. |
|
Humidity |
Non-condensing Relative Humidity: 5% to 95% |
|
Standard Safety Certifications |
UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN 60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition with all group differences and national deviations. |
|
Operating Temperature and Altitude |
Industrial temperature (-40C to +85C internal component temperature range) -40C to +60C operating temperature (outside ambient) 5Kft altitude |
The EM74XX series modems have different performance numbers than the WP7600 series modems do. The EM74XX series will experience reduced (throttled) performance in conditions where the ambient temperature reaches high levels. Refer to the following table for details on temperature/airflow and performance throughput.
|
Maximum Ambient Temperature (C/F) |
Air Flow (LFM) |
Hardware |
Throughput Performance |
|---|---|---|---|
|
50°/122° |
0 |
IR1101 |
Normal |
|
60°/140° |
0 |
IR1101 |
Throttled |
|
60°/140° |
40 |
IR1101 |
Throttled |
|
65°/149° |
200 |
IR1101 |
Throttled |
|
50°/122° |
0 |
IR1101 plus IRM-1100 |
Normal |
|
55°/131° |
40 |
IR1101 plus IRM-1100 |
Normal |
|
60°/141° |
200 |
IR1101 plus IRM-1100 |
Normal |
|
Maximum Ambient Temp (°C/°F) |
Air Flow (LFM) |
Chassis Hardware |
LTE Throughput Performance |
|
50°/122° |
0 |
IR1101 |
Normal |
|
55°/131° |
0 |
IR1101 |
LTE Uplink throttled |
|
60°/140° |
0 |
IR1101 |
LTE Uplink (UL) throttled, and UL RF transmit power reduced on 50% of LTE frames. Uplink communication range reduced on 50% of LTE frames. |
|
65°/149° |
0 |
IR1101 |
Same as 60C, 0 LFM and downlink (DL) C/A carrier aggregation is disabled. |
|
70°/158° |
40 |
IR1101 |
Same as 65C, 0 LFM |
| MaximumAmbient Temperature (C/F) | AirFlow (LFM) |
Hardware |
ThroughputPerformance |
|---|---|---|---|
|
60℃/140℉ |
0 |
IR1101 plus IRM-1100 |
Normal |
|
65℃/149℉ |
40 |
IR1101 plus IRM-1100 |
Throttled |
|
70℃/158℉ |
200 |
IR1101 plus IRM-1100 |
Throttled |
The EM9293 modems will experience reduced (throttled) performance in conditions where the ambient temperature reaches high levels. Refer to the following table for details on temperature/airflow and performance throughput.
| MaximumAmbient Temperature (C/F) | AirFlow (LFM) |
Hardware |
ThroughputPerformance |
|---|---|---|---|
|
50℃/122℉ |
0 |
IR1101 plus IRM-1100 |
Normal |
|
60℃/140℉ |
40 |
IR1101 plus IRM-1100 |
Throttled |
|
65℃/149℉ |
200 |
IR1101 plus IRM-1100 |
Throttled |
Feedback