Table of Contents

oview_ic

Overview of Cisco Interface Cards for Cisco Access Routers

Revised: 12/03/2011, OL-12796-03

Overview

This document provides an overview of Cisco interface cards used in Cisco access routers, and contains the following sections:

- Introduction to Cisco Interface Cards

- Cisco Access Routers and Cisco Interface Cards

- Cisco IOS Software Releases and Cisco Interface Cards

- Cisco Network Modules Supporting Cisco Interface Cards

- Cabling for Cisco Interface Cards

- Platform Support for Cisco Interface Cards

- Related Documents

- Installing Cisco Interface Cards in Cisco Access Routers

- Obtaining Documentation, Obtaining Support, and Security Guidelines

Introduction to Cisco Interface Cards

Cisco interface cards are classified according to the technologies they support. For example, WAN interface cards (WICs) support WAN technologies, such as Gigabit Ethernet; and voice interface cards (VICs) support voice technologies. Voice/WAN interface cards (VWICs) can support voice, data, and voice and data applications, depending on the capabilities of the router in which the VWIC is installed. Enhanced High-speed WAN interface cards (EHWIC) provide expanded LAN and WAN capabilities, such as Gigabit Ethernet and Ethernet switching.

Note EHWICs are supported on Cisco 1861-E, Cisco 1900 series (modular), Cisco 2900 series, and Cisco 3900 series routers.

Cisco interface cards are available in the following two form factors to provide greater modularity and functionality for users:

- Single-wide interface cards (see Figure 1)

- Double-wide interface cards (see Figure 2)

Single-wide interface cards can be installed in interface card slots on supported Cisco access routers, in 1- or 2-slot network modules to be installed in network module slots on supported Cisco access routers, and in interface card slots on Cisco 1800 (modular) series, Cisco 2800 series, and Cisco 3800 series routers. Figure 1 shows a sample single-wide interface card.

Figure 1 Sample Single-Wide Interface Card

Double-wide interface cards can only be installed in interface card slots on Cisco 1900 series, Cisco 2800 series, Cisco 2900 series, Cisco 3800 series, and Cisco 3900 series routers. Figure 2 shows a sample double-wide interface card.

Figure 2 Sample Double-Wide Interface Card

Cisco Access Routers and Cisco Interface Cards

The Cisco interface cards described in this document are supported on the following Cisco routers:

- Cisco 1800 series (modular), including the Cisco 1841 routers (see Figure 3)

- Cisco 1900 series (modular), including the Cisco 1941 routers (see Figure 4)

- Cisco 2800 series, including the Cisco 2801, Cisco 2811, Cisco 2821, and Cisco 2851 routers (see Figure 5 and Figure 6)

- Cisco 2900 series, including the Cisco 2901, Cisco 2911, Cisco 2921, and Cisco 2951 routers (see Figure 7, Figure 8, and Figure 9)

- Cisco 3700 series, including the Cisco 3725 and Cisco 3745 routers (see Figure 10 and Figure 11)

- Cisco 3800 series, including the Cisco 3825 and Cisco 3845 routers (see Figure 10)

- Cisco 3900 series, including the Cisco 3925 and Cisco 3945 routers (see Figure 11)

- Cisco MWR 1941-DC routers (see Figure 12)

- Cisco ICS 7750 routers

For information on these Cisco routers, see the hardware documentation described in the “Related Documents” section.

Note Certain Cisco interface cards are also supported on the Cisco ICS 7750. See Table 4 for more information.

Interface Card Slot Locations and Numbering on Cisco Access Routers

See Figure 3 through Figure 12 for interface card slot locations on sample Cisco access routers. See the hardware documentation for your router for detailed information on slot and interface numbering.

Figure 3 Interface Card Slot Locations on Cisco 1800 Series (Modular) Series Routers (Cisco 1841 Router Shown)

1

WIC, VWIC—data only, or HWIC slot 1

2

WIC, VWIC—data only, or HWIC slot 0

Figure 4 Interface Card Slot Locations on Cisco 1900 Series Routers

1

EHWIC, HWIC, WIC, VWIC1, slot 0

2

EHWIC, HWIC, WIC, slot 1, 1 double-wide2, or 1 single-wide

1.VWIC support is for data only.

1.VWIC support is for data only.

2.The double-wide slot can accommodate a single wide EHWIC, HWIC, WIC, or VWIC (data only), on the left side of the slot.

2.The double-wide slot can accommodate a single wide EHWIC, HWIC, WIC, or VWIC (data only), on the left side of the slot.

Figure 5 Interface Card Slot Locations on Cisco 2801 Routers

1

WIC/VIC/VWIC/HWIC slot 3

4

VIC/VWIC (voice only) slot 0

2

WIC/VIC/VWIC slot 2

5

Interface card slot divider

3

WIC/VIC/VWIC/HWIC slot 1

6

Interface card slot divider

Note To install double-wide interface cards in Cisco 2801 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 6 Interface Card Slot Locations on Cisco 2800 Series Routers (Cisco 2851 Router Shown)

1

HWIC slot 3

4

HWIC slot 0

2

HWIC slot 1

5

EVM3 slot

3

HWIC slot 2

6

NME4 slot

3.EVM = Extension voice module

3.EVM = Extension voice module

4.NME = Network module enhanced

4.NME = Network module enhanced

Note To install double-wide interface cards in Cisco 2811, Cisco 2821, and Cisco 2851 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 7 Interface Card Slot Locations on Cisco 2901

1

EHWIC 0

3

EHWIC 2

2

EHWIC 1

4

EHWIC 3

Note To install double-wide interface cards in Cisco 2901 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 8 Interface Card Slot Locations on Cisco 2911

1

EHWIC 0

4

EHWIC 3

2

EHWIC 1

5

Service module slot (SM)

3

EHWIC 2

Note To install double-wide interface cards in Cisco 2911, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 9 Interface Card Slot Locations on Cisco 2921 and 2951

1

EHWIC 0

4

EHWIC 3

2

EHWIC 1

5

2951 SM

3

EHWIC 2

2921 SM

—

6

2951 SM

2921 blank panel

Note To install double-wide interface cards in Cisco 2951 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 10 Interface Card Slot Locations on Cisco 3800 Series Routers (Cisco 3825 Router Shown)

1

Network module slot 2 (extended double-wide)

4

HWIC slot 2

2

HWIC slot 2

5

HWIC slot 3

3

HWIC slot 1

6

Network module slot 1 (extended single-wide)

Note To install double-wide interface cards in Cisco 3800 series routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Figure 11 Interface Card Slot Locations on Cisco 3900 Series Routers

1

EHWIC 0

5

3945 SM1

2

EHWIC 1

6

3945 SM2, 3925 SM1

3

EHWIC 2

7

3945 SM3

4

EHWIC 3

8

3945 SM4, 3925 SM2

Note To install double-wide interface cards in the Cisco 3900 series routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.

Note To install double-wide service modules in the Cisco 3900 series routers, remove the slot divider between slots SM3 and SM4 (3945), and remove the blank panel to the right of SM2 (3925).

Figure 12 Interface Card Slot Locations on Cisco MWR 1941-DC Routers

1

Network module slot

3

Interface card slot 0

2

Interface card slot 1

4

Interface card slot 2

Platform Slot Numbering and Limitations for Cisco Interface Cards

Certain platforms have restrictions on the number of total interface cards of a certain type that can be installed, and some slots do not support certain interface cards.

for information about the interface card slots available on Cisco access routers.

Table 1 Interface Card Slots Available on Cisco Access Routers

Cisco Router

Number of Slots

Slot Type

Slot Numbering

Installation Notes and Limitations

Cisco 1800 series

2

Single-wide

Slot 0, slot 1

Does not support VICs.

Does not support double-wide HWICs.

Supports VWICs for data applications only.

Cisco 1900 series

2

1 Single-wide

and

1 Double-wide5

Slot 0, slot 1

EHWIC, HWIC, WIC, or VWIC6.

Cisco 2801 routers

4

Single-wide

Slot 0 through slot 3

Slot 0 supports only VICs and VWICs in voice mode only.

Slot 1 and slot 3 support HWICs.

Slot 0 and slot 2 do not support HWICs.

2

Double-wide

Slot 1, slot 3

Removing the slot divider changes slot numbering as follows:

- Slot 0 and slot 1 become slot 1

- Slot 2 and slot 3 become slot 3

).

Cisco 2811, Cisco 2821, and Cisco 2851 routers

4

Single-wide

Slot 0 through slot 3

—

2

Double-wide

Slot 1, slot 3

Removing the slot divider changes slot numbering as follows:

- Slot 0 and slot 1 become slot 1

- Slot 2 and slot 3 become slot 3

).

Cisco 2900 series

4

4 Single-wide

or

2 Double-wide

Slot 0 through 3

EHWIC, HWIC, VIC, and WICs

Removing the slot divider changes slot numbering as follows:

- Slot 0 and slot 1 become slot 1

- Slot 2 and slot 3 become slot 3

).

Cisco 3800 series

4

Single-wide

Slot 0 through slot 3

—

2

Double-wide

Slot 1, slot 3

Removing the slot divider changes slot numbering as follows:

- Slot 0 and slot 1 become slot 1

- Slot 2 and slot 3 become slot 3

).

Cisco 3900 series

4

4 Single-wide

or

2 Double-wide

Slot 0 through 3

EHWIC, HWIC, VIC, and WICs

Removing the slot divider changes slot numbering as follows:

- Slot 0 and slot 1 become slot 1

- Slot 2 and slot 3 become slot 3

).

Cisco ICS 7750

—

—

—

Routers do not support HWICs.

To install interface cards in the Cisco ICS 7750, use a MRP7 or ASI 818 card.
for more information about these cards.

Cisco MWR 1941-DC routers

1

Single-wide

Slot 1 through slot 3

Routers do not support HWICs.

5.The double-wide slot can accommodate a single wide EHWIC, HWIC, WIC, or VWIC (data only), on the left side of the slot.

5.The double-wide slot can accommodate a single wide EHWIC, HWIC, WIC, or VWIC (data only), on the left side of the slot.

6.VWIC support is for data only.

6.VWIC support is for data only.

7.MRP = multiroute processor.

7.MRP = multiroute processor.

8.ASI 81 = analog station interface 81.

8.ASI 81 = analog station interface 81.

Cisco IOS Software Releases and Cisco Interface Cards

Cisco interface cards are often supported on multiple Cisco IOS releases. Cisco IOS release information is documented in the product data sheet and in Feature Navigator II.

.

at the login dialog box and follow the instructions that appear.

Cisco Network Modules Supporting Cisco Interface Cards

Some Cisco network modules have interface card slots to allow installation of Cisco interface cards. These network modules have either one or two interface card slots, supporting either voice or data interface cards. See Figure 13 and Figure 14 for sample 1-slot and 2-slot network modules.

Note Some combination voice/data interface cards are supported on 1- or 2-slot network modules. However, interface card functionality is limited to either voice or data applications. See Table 1 for more information.

Figure 13 Sample 1-Slot Network Module

1

Interface card slot 0

Figure 14 Sample 2-Slot Network Module

1

Interface card slot 1

2

Interface card slot 0

.

.

Cabling for Cisco Interface Cards

for more information.

Note Cabling for 1- or 2-slot network modules is determined by the installed interface cards.

Note For network-end connectors and pinout specifications of the cables connecting the voice cards, see Cisco Modular Access Router Specifications.

Table 2 Cabling for Cisco Interface Cards

Technology

Connection Type

Connector Type, Cable Color

Cable

Use with

Analog Dialup

300 bps to 33.6 kbps analog dialup

RJ-11, pink

RJ-11 straight-through

WIC-2AM-V2

Cable Modem

Cable

F

CATV coaxial

HWIC-CABLE-E/J-2

DSL

ADSL/VDSL

RJ-11C/CA11A, lavender

RJ-11 straight-through

EHWIC-VA-DSL-M

SHDSL

RJ-11C/CA11A, lavender

RJ-14 straight-through for 4-wire

WIC-1SHDSL-V3

RJ-11

RJ-11 straight-through

HWIC-2SHDSL

RJ-45

RJ-45 straight-through

EHWIC-4SHDSL-EA

Ethernet

Fast Ethernet, copper

RJ-45

100BASE-T Category 5 or above UTP

HWIC-D-9ESW-POE

Fast Ethernet, copper

RJ-45

- For 10BASE-T operation, use Category 3, 4, or 5 UTP cable

- For 100BASE-TX operation, use Category 5 UTP cable

HWIC-2FE

Gigabit Ethernet, copper

RJ-45

1000BASE-T Category 5 or above UTP

HWIC-1GE-SFP (through SFP)

Gigabit Ethernet, optical

Note A single fiber link should not mix 62.5- and 50-micron cable.

LC, color according to optical wavelength

Optical fiber as specified on applicable data sheet

HWIC-1GE-SFP (through SFP)

ISDN Connections

(external NT1)

RJ-48C

RJ-48C straight-through

WIC-1B-S/T-LL

(external NT1)

RJ-45

RJ-45 Straight-through

HWIC-ADSLI-B/ST

(built-in NT1)

RJ-49C/CA-A11, red

RJ-11; RJ-21 if using NM-HDA, straight-through

WIC-1B-U-V2

56/64 kbps DSU/CSU

8-pin modular, blue

RJ-48S straight-through

WIC-1DSU-56K4

T1/fractional T1 DSU/CSU

RJ-48C

RJ-48C straight-through

WIC-1DSU-T1-V2

Serial Connections

Synchronous serial

60-pin D, blue

Serial transition cable (EIA/TIA-232, EIA/TIA-449, EIA/TIA-530 DTE, V.35, X.21, NRZ/NRZI)

WIC-1T

Serial

26-pin Cisco Smart serial

)

WIC-2T

68-pin

Cisco 4-port RS-232 DCE or DTE cable assembly (two cable assemblies are required for each HWIC-8A/S-RS232)

HWIC-8A/S-RS232

Cisco 8-port RS-232 DTE cable assembly (two cable assemblies are required for each HWIC-16A)

HWIC-16A

Voice Connections

Digital voice, T1/E1

RJ-48C/CA81A, tan

RJ-48C straight-through

VIC-2BRI-ST/TE

Digital voice/data, T1/E1

VWIC2-2MFT-T1/E1

Analog voice, FXS

RJ-11, gray

RJ-11 straight-through

VIC3-4FXS/DID

Analog voice, FXO

RJ-11, pink

VIC2-4FXO

Analog voice, CAMA

VIC2-4FXO

Analog voice, DID

RJ-11

VIC3-4FXS/DID

Analog voice, E&M

RJ-45, brown

RJ-45 straight-through

VIC3-2E/M

lists Cisco 12-in-1 Smart Serial Interface Cable part numbers.

Table 3 Cisco 12-in-1 Smart Serial Interface Cable Part Numbers

Interface

DCE/DTE

Cisco Cable Part Number

EIA/TIA-232

Male DTE

CAB-SS-232MT

EIA/TIA-449

Male DTE

CAB-SS-449MT

EIA-530

Male DTE

CAB-SS-530MT

EIA-530A

Male DTE

CAB-SS-530AMT

V.35

Male DTE

CAB-SS-V35MT

X.21

Male DTE

CAB-SS-X21MT

Platform Support for Cisco Interface Cards

lists the platforms supported by each interface card. The interface cards are grouped by technology area:

- Analog Modem WAN Interface Cards

- Cable Modem High-Speed WAN Interface Cards

- Channel Service Unit/Data Service Unit (CSU/DSU) WAN Interface Cards

- DSL WAN Interface Cards

- Ethernet Switch WAN Interface Cards

- ISDN BRI WAN Interface Cards

- Serial WAN Interface Cards

- T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards

- Voice Interface Cards

- Wireless Interface Cards

Table 4 Platform Support for Cisco Interface Cards

Product Description

Cisco Product ID

Supported on Cisco Routers

See Document

Analog Modem WAN Interface Cards

1-port analog modem WIC

WIC-1AM

Cisco 3800 series

2-port analog modem WIC

WIC-2AM

Cisco 3800 series

1-port analog modem WIC, version 2

WIC-1AM-V2

Cisco 3800 series

2-port analog modem WIC, version 2

WIC-2AM-V2

Cisco 3800 series

Cable Modem High-Speed WAN Interface Cards

Cable modem HWIC, United States version

HWIC-CABLE-D-2

Cisco 3800 series

Cable modem HWIC, Europe and Japan version

HWIC-CABLE-E/J-2

Cisco 3800 series

Channel Service Unit/Data Service Unit (CSU/DSU) WAN Interface Cards

1-port T1/fractional T1 DSU/CSU WIC

WIC-1DSU-T1

Cisco ICS 7750

1-port T1/fractional T1 DSU/CSU WIC, version 2

WIC-1DSU-T1-V2

Cisco ICS 7750

1-port 4-wire 56/64 kbps CSU/DSU WIC

WIC-1DSU-56K4

Cisco 3800 series

DSL WAN Interface Cards

1-port ADSL-over-POTS WIC

WIC-1ADSL

Cisco 3800 series

1-port ADSL-over-POTS with dying gasp WIC

WIC-1ADSL-DG

Cisco 3800 series

1-port ADSL-over-ISDN with dying gasp WIC

WIC-1ADSL-I-DG

Cisco 3800 series

1-port ADSL-over-POTS with dying gasp HWIC

HWIC-1ADSL

Cisco 3800 series

1-port ADSL-over-ISDN with dying gasp HWIC

HWIC-1ADSLI

Cisco 3800 series

1-port ADSL-over-POTS with dying gasp HWIC with backup ISDN port

HWIC-1ADSL-B/ST

Cisco 3800 series

1-port ADSL-over-ISDN with dying gasp HWIC with backup ISDN port

HWIC-1ADSLI-B/ST

Cisco 3800 series

1-port G.SHDSL WIC (two-wire only)

WIC-1SHDSL

Cisco 3800 series

1-port G.SHDSL WIC (two- and four-wire), version 2

WIC-1SHDSL-V2

Cisco 3800 series

1-port G.SHDSL WIC (two- and four-wire), version 3

WIC-1SHDSL-V3

Cisco 3800 series

2-port G.SHDSL WIC

HWIC-2SHDSL

Cisco 3800 series

4-port G.SHDSL WIC

HWIC-4SHDSL

Cisco 3800 series

4-pair EFM over G.SHDSL HWIC

HWIC-4SHDSL-E

Cisco 3945-E

4-pair EFM/ATM over G.SHDSL EHWIC

EHWIC-4SHDSL-EA

Cisco 3945-E

Ethernet Switch WAN Interface Cards

Gigabit EtherSwitch EHWIC

EHWIC-D-8ESG-P

Cisco 1921

Connecting Cisco Gigabit EtherSwitch EHWICs

4-port 10/100BASE-T Ethernet switch HWIC

HWIC-4ESW

Cisco 3800 series

4-port Ethernet switch HWIC with inline power

HWIC-4ESW-POE

Cisco 3900 Series

9-port 10/100BASE-T Ethernet switch HWIC

HWIC-D-9ESW

Cisco 3800 series

9-port Ethernet switch HWIC with inline power

HWIC-D-9ESW-POE

Cisco 3900 Series

1-port Fast Ethernet HWIC

HWIC-1FE

Cisco 3800 series

2-port Fast Ethernet HWIC

HWIC-2FE

Cisco 3800 series

1-port Gigabit Ethernet HWIC

HWIC-1GE-SFP

Cisco 3800 series

ISDN BRI WAN Interface Cards

1-port ISDN BRI WIC with integrated NT1—U interface

WIC-1B-U

Cisco ICS 7750

version 2

WIC-1B-U-V2

Cisco 3800 series

1-port ISDN BRI WIC with S/T interface

WIC-1B-S/T

Cisco ICS 7750

1-port ISDN BRI WIC with S/T interface, version 3

WIC-1B-S/T-V3

Cisco 3800 series

Serial WAN Interface Cards

1-port serial WIC

WIC-1T

Cisco ICS 7750

2-port serial WIC

WIC-2T

Cisco ICS 7750

synchronous serial WIC

WIC-2A/S

Cisco MWR 1941-DC

4-port multiprotocol serial HWIC

HWIC-4T

Cisco 3800 series

synchronous serial HWIC

HWIC-4A/S

Cisco 3800 series

synchronous serial HWIC

HWIC-8A-RS232

Cisco 3800 series

8-port asynchronous serial HWIC

HWIC-8A

Cisco 3800 series

16-port asynchronous serial HWIC

HWIC-16A

Cisco 3800 series

T1, E1, and G.703 Multiflex Trunk Voice and WAN Interface Cards

1-port T1 RJ-48 multiflex trunk VWIC

VWIC-1MFT-T1

Cisco ICS 7750

2-port T1 RJ-48 multiflex trunk VWIC

VWIC-2MFT-T1

Cisco ICS 7750

2-port T1 RJ-48 multiflex trunk VWIC with drop-and-insert capability

VWIC-1MFT-T1-DI

Cisco 3800 series

1-port E1 RJ-48 multiflex trunk VWIC

VWIC-1MFT-E1

Cisco ICS 7750

2-port E1 RJ-48 multiflex trunk VWIC

VWIC-2MFT-E1

Cisco ICS 7750

1-port T1/E1 RJ-48 multiflex trunk VWIC with hardware echo cancellation, version 2

VWIC2-1MFT-T1/E1

Cisco 3800 series

2-port T1/E1 RJ-48 multiflex trunk VWIC with hardware echo cancellation, version 2

VWIC2-2MFT-T1/E1

Cisco 3800 series

2-port E1 RJ-48 multiflex trunk VWIC with drop-and-insert capability

VWIC-2MFT-E1-DI

Cisco 3800 series

1-port G.703 RJ-48 multiflex trunk VWIC

VWIC-1MFT-G703

Cisco 3800 series

2-port G.703 RJ-48 multiflex trunk VWIC

VWIC-2MFT-G703

Cisco 3800 series

1-port G.703 RJ-48 multiflex trunk VWIC with hardware echo cancellation, version 2

VWIC2-1MFT-G703

Cisco 3800 series

2-port G.703 RJ-48 multiflex trunk VWIC with hardware echo cancellation, version 2

VWIC2-2MFT-G703

Cisco 3800 series

2-port T1/fractional T1 multiflex trunk VWIC with drop-and-insert capability and integrated CSU/DSU

VWIC-2MFT-T1-DIR

Cisco MWR 1941-DC

2-port E1/fractional E1 multiflex trunk VWIC with drop-and-insert capability and integrated DSU

VWIC-2MFT-E1-DIR

Cisco MWR 1941-DC

2-port T1/E1 radio access network optimization VWIC

VWIC-2T1/E1-RAN

Cisco MWR 1941-DC

Voice Interface Cards

2-port Direct Inward Dial (DID) VIC

VIC-2DID

Cisco ICS 7750

1-port digital VIC for Japan

VIC-1J1

4-port FXS or DID VIC

VIC-4FXS/DID

Cisco ICS 7750

2-port FXS VIC

VIC-2FXS10

Cisco ICS 7750

2-port FXS VIC, version 2

Cisco 3900 Series

2-port FXO VIC for the United States

Cisco ICS 7750

2-port FXO VIC for Europe

Cisco ICS 7750

2-port FXO VIC for Australia

Cisco ICS 7750

2-port FXO VIC

Cisco ICS 7750

2-port FXO (universal) VIC, version 2

Cisco 3900 Series

4-port FXO VIC for the United States

VIC-4FXO-M1

Cisco ICS 7750

4-port FXO (universal) VIC, version 2

Cisco 3900 Series

2-port E&M VIC

Cisco ICS 7750

2-port E&M VIC, version 2

Cisco ICS 7750

2-port ISDN BRI S/T (NT and TE) VIC

VIC-2BRI-NT/TE

Cisco ICS 7750

2-port ISDN BRI S/T (NT and TE) VIC, version 2

VIC2-2BRI-NT/TE

Cisco ICS 7750

2-port E&M VIC version 2

VIC3-2E/M

Cisco 3900 Series

4-port FXS or DID VIC

VIC3-2FXS/DID

Cisco 3900 Series

4-port FXS or DID VIC

VIC3-2FXS-E/DID

Cisco 3800 series

4-port FXS or DID VIC

VIC3-4FXS/DID

Cisco 3900 Series

Wireless Interface Cards

Access point HWIC for North America

HWIC-AP-G-A

Cisco 3845

Access point HWIC for Europe

HWIC-AP-G-E

Cisco 3845

Access point HWIC for Japan

HWIC-AP-G-J

Cisco 3845

GSM 3G Wireless WAN HWIC

HWIC-3G-GSM

Cisco 3845

CDMA 3G Wireless WAN HWIC

HWIC-3G-CDMA

Cisco 3845

9.Not supported on Cisco 2801 routers.

9.Not supported on Cisco 2801 routers.

10.In Cisco 1751 and Cisco 1760 routers, can be directly installed into a router interface slot. For other routers, cannot be installed directly into Cisco router interface card slots. Install in a voice network module (NM-1V or NM-2V).

10.In Cisco 1751 and Cisco 1760 routers, can be directly installed into a router interface slot. For other routers, cannot be installed directly into Cisco router interface card slots. Install in a voice network module (NM-1V or NM-2V).

Related Documents

.

- Installing Cisco Interface Cards in Cisco Access Routers

- Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information

- Cisco Router Guide—For teleworkers, small offices, small to medium-sized businesses and enterprise branch and head offices

Obtaining Documentation, Obtaining Support, and Security Guidelines

, which also lists all new and revised Cisco technical documentation, at:

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2011 Cisco Systems, Inc. All rights reserved.