Release Notes for Cisco NCS 6000 Series Routers, IOS XR Release 7.4.1
 Note |
This software release has reached end-of-life status. For more information see the End-of-Life and End-of-Sale Notices. |
The Cisco Network Convergence System (NCS) 6000 series router delivers outstanding network agility, packet optical convergence, and a system scale measured in petabits per second. It also facilitates the build-out of next-generation core to:
-
support elastic capacity at the lowest total ownership cost
-
deliver high-bandwidth mobile, video, and cloud services
Running the Cisco IOS XR operating system, Cisco's innovative virtualized operating environment, the Cisco NCS 6000 series router advances the concept of distributed routing and virtualization. With Cisco Virtualized IOS XR, the Cisco NCS 6000 series router brings new levels of programmability and virtualization to:
-
enhance application service offerings
-
increase provisioning speed
-
optimize network economics
The Cisco NCS 6000 series router is engineered for environmental efficiency, with the use of adaptable power consumption. The Cisco NCS 6000 series router is powered by the Cisco nPower Network Processor Units (NPU). These technologies aid the Cisco NCS 6000 series router to achieve the lowest carbon footprint in service provider routing.
The Cisco NCS 6008 router, part of the Cisco NCS 6000 series routers, is the next-generation core routing system that provides industry-leading 8 Tbps of full-duplex network bandwidth through single chassis with eight line cards per chassis.
The Cisco NCS 6008 router runs on Cisco IOS XR software with Linux as the underlying host operating system. A Kernel-based Virtual Machine (KVM) hypervisor provides a virtualized environment to independently run system administration and routing functions on separate virtual machines. This provision makes the new system versatile and robust, and provides immense flexibility for future expansion without the need for a complete system overhaul.
A multi-slice architecture of line cards enables the system to be configured in a mixed operating mode, simultaneously supporting traffic at 10 Gbps and 100 Gbps on slice-level granularity.
For a list of software caveats that apply to this Release, see the Caveats section. The caveats are updated for every release and are described at http://www.cisco.com.
What's New in Cisco IOS XR Release 7.4.1
Cisco is continuously enhancing the product with every release and this section covers a brief description of key features and enhancements. It also includes links to detailed documentation, where available.
| Feature | Description |
|---|---|
|
IP Addresses and Services |
|
|
This feature enables the network stack to support the use of virtual IP addresses by IOS XR or third-party applications that utilize the Linux networking stack. Virtual addresses can now be configured to access a router from the management network using a single virtual IP address. |
|
|
Programmability |
|
|
This tool provides a quick reference for IOS XR CLIs and a corresponding YANG data model that could be used. New command introduced for this feature: yang describe |
|
|
Unified models are CLI-based YANG models that are designed to replace the native schema-based models. UM models are generated directly from the IOS XR CLIs and mirror them in several ways. This results in improved usability and faster adoption of YANG models. You can access the new unified models from the Github repository. |
|
| The network orchestrator is a central point of management for the network and typical workflow involves synchronizing the configuration states of the routers it manages. Loading configurations for comparing the states involves unnecessary data and subsequent comparisons are load intensive. This feature synchronizes the configuration states between the orchestrator and the router using a unique commit ID that the router maintains for each configuration commit. The orchestrator retrieves this commit ID from the router using NETCONF Remote Procedure Calls (RPCs) to identify whether the router has the latest configuration. | |
|
System Management |
|
|
This feature allows a BGP neighbor established over a CSI interface to be allocated a BGP Egress Peer Engineering (EPE) segment. |
|
|
This feature allows you to configure an explicit binding SID (BSID) over a CSI interface. |
|
|
System Security |
|
|
This feature allows all authorized users on XR VM to access the admin data on the router through NETCONF or gRPC interface, similar to accessing the CLI. This functionality works by internally mapping the task group of the user on XR VM to a predefined group on System Admin VM. Therefore, the NETCONF and gRPC users can access the admin-related information on the router even if their user profiles do not exist on System Admin VM. Prior to this release, only those users who were authorized on XR VM could access System Admin VM through CLI, by using the admin command. Users that were not configured on System Admin VM were denied access through NETCONF or gRPC interface. |
|
|
TACACS+ servers provide AAA services to the user. In the event a TACACS+ server becomes unreachable, the router sends the client request to another server, leading to considerable delay in addressing the requests. To prevent this delay, you can set a hold-down timer on the router. The timer gets triggered after the router marks the TACACS+ server as down. During this period, the router does not select the server that is down for processing any client requests. When the timer expires, the router starts using that TACACS+ server for client transactions. This feature improves latency in providing AAA services to the user by limiting the client requests from being sent to unresponsive servers. This feature introduces the holddown-time command. |
|
|
NETCONF Access Control Model (NACM) for Protocol Operations and Authorization |
NACM is defined in AAA subsystem to manage access control for NETCONF Remote Procedure Calls (RPCs). NACM addresses the need to authenticate the user or user groups, authorize whether the user has the required permission to perform the operation. With this feature, you can configure the authorization rules, groups and rule lists containing multiple groups and rules using CLI commands in addition to existing support for YANG data models. This feature also introduces |
|
Telemetry |
|
|
Streaming huge telemetry data can create congestion in the network. With this feature, you can use the regular expression (regex) keys in the sensor path configuration on the router. The keys limit the amount of data that can be streamed, thereby ensuring better bandwidth utilization. |
|
|
With this feature, in-band telemetry data is sent over the data ports of line cards using the gRPC protocol. This method of data streaming overcomes bandwidth limitations that are otherwise seen when data is sent via the management ports. This feature can be enabled on more than one VRF entity. In addition, data can be transmitted and received from the router to the collector via VLAN IDs configured on the router and the collector. |
|
|
Virtual Private Network |
|
|
This feature allows you to generate a flow-aware transport (FAT) label for the traffic going out of the PWHE-L3 interface on the PE device. P routers use the FAT label to load balance the traffic based on the flow but not on the VC label. This feature provides a better traffic distribution across ECMP paths. |
|
Caveats
Caveats describe unexpected behavior in Cisco IOS XR Software releases. Severity-1 caveats are the most critical caveats; severity-2 caveats are less critical.
Caveats Specific to the NCS 6000 Series Routers
|
Bug ID |
Headline |
|---|---|
|
SRTE forwarding counters not shown for CSI interface |
|
|
Yang response of "show install active" showing non xr packages. |
Release 7.4.1 Packages
This table lists the Cisco IOS XR Software feature set matrix (packages) and associated filenames available for the Cisco IOS XR Software Release 7.4.1 that is supported on the Cisco NCS 6008 router.
|
Feature Set |
Filename |
Description |
|
Composite Package |
||
|
Cisco IOS XR IP Unicast Routing Core Bundle |
ncs6k-mini-x.iso-7.4.1 |
Contains required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, FPD, and Alarm Correlation. |
|
Optional Individual Packages (packages that are installed individually) |
||
|
Cisco IOS XR Manageability Package |
ncs6k-mgbl.pkg-7.4.1 |
Extensible Markup Language (XML) Parser and HTTP server packages. |
|
Cisco IOS XR MPLS Package |
ncs6k-mpls.pkg-7.4.1 |
MPLS Traffic Engineering (MPLS-TE), Label Distribution Protocol (LDP), MPLS Forwarding, MPLS Operations, Administration, and Maintenance (OAM), Link Manager Protocol (LMP), Optical User Network Interface (OUNI), Resource Reservation Protocol (RSVP), and Layer-3 VPN. |
|
Cisco IOS XR Multicast Package |
ncs6k-mcast.pkg-7.4.1 |
Multicast Routing Protocols (PIM, Multicast Source Discovery Protocol [MSDP], Internet Group Management Protocol [IGMP], Auto-RP), Tools (SAP, MTrace), and Infrastructure [(Multicast Routing Information Base [MRIB], Multicast-Unicast RIB [MURIB], Multicast forwarding [MFWD]). |
|
Cisco IOS XR Security Package |
ncs6k-k9sec.pkg-7.4.1 |
Support for Encryption, Decryption, IP Security (IPSec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI) (Software based IPSec support—maximum of 500 tunnels) |
|
Cisco IOS XR Lawful Intercept (LI) Package |
ncs6k-li.pkg-7.4.1 |
Supports Lawful Intercept (LI) features. |
|
Cisco IOS XR Documentation Package |
ncs6k-doc.pkg-7.4.1 |
.man pages for Cisco IOS XR Software. |
Determining Installed Active Packages
To determine active software packages installed on the router, log in to the router and enter the show install active summary command in EXEC mode:
RP/0/RP0/CPU0:router# show install active
Active Packages: 7
ncs6k-xr-7.4.1 version=7.4.1 [Boot image]
ncs6k-doc-1.0.0.0-r741
ncs6k-li-1.0.0.0-r741
ncs6k-mcast-1.0.0.0-r741
ncs6k-mgbl-1.0.0.0-r741
ncs6k-mpls-1.0.0.0-r741
ncs6k-k9sec-1.0.0.0-r741Supported Packages and System Requirements
This section describes the system requirements for Cisco NCS 6000 Series Routers for Software Release .
Memory Requirements
The minimum memory requirements for a Cisco NCS 6008 router running Cisco IOS XR Software Release consist of the following:
-
48 GB memory on the NCS 6008 Route Processors (NCS6-RP)
-
16 GB memory on 1T line cards
-
32 GB memory on 2T line cards
In order to avoid low memory conditions during system operations, it is recommended that you have 2000MB of free memory available on the Route Processors.
Supported Hardware
The following table lists the supported hardware components on the Cisco NCS 6000 Series Router and the minimum required software release. For more information, see the Firmware Support section.
|
Component |
Part Number |
Support from Release |
|---|---|---|
|
20-port 100Gbps Lean Core PAYG Line Card |
NC6-10/20X100G-L-C |
7.1.1 |
|
20-port 100Gbps Multi-Service PAYG Line Card |
NC6-10/20X100G-M |
7.1.1 |
|
Second-generation S2 fabric card for the FCC with 32 CXP2 ports for 270GE SR25 CXP2s |
NCS-F-FC2 |
6.3.2 |
|
CXP2 - 270GE SR25 transceiver module |
ONS-CXP2-SR25 |
6.3.2 |
|
96 ONS-CXP2-SR25 optical modules |
NCS-FAB-OPT2 |
6.3.2 |
|
Cisco 100GBASE SR4 QSFP Transceiver Cisco 100GBASE LR4 QSFP Transceiver |
QSFP-100G-SR4-S QSFP-100G-LR4-S |
6.2.2 |
|
20-port 100Gbps Lean Core |
NC6-20X100GE-L-C |
6.2.2 |
|
20-port 100Gbps Multi-Service Core |
NC6-20X100GE-M-C |
6.2.2 |
|
Universal Fabric Card |
NC6-FC2-U |
6.2.1 |
|
Cisco NCS 6008 FT, version 2 |
NC6-FANTRAY-2 |
6.1.2 |
|
CPAK optical transceiver module, 100GBASE-SR4, 100m OM4 |
CPAK-100G-SR4 |
6.1.2 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics |
NC6-FC-MC |
5.2.1 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics Spare |
NC6-FC-MC= |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs |
NCS-F-FC |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs Spare |
NCS-F-FC= |
5.2.1 |
|
FCC shelf controllers |
NCS-F-SC |
5.2.1 |
|
FCC shelf controllers Spare |
NCS-F-SC= |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card |
NCS-F-SCSW |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card Spare |
NCS-F-SCSW= |
5.2.1 |
|
Short reach SFP 10GE transceiver module |
SFP-10G-SR |
5.2.1 |
|
Long reach SFP 10GE transceiver module |
SFP-10G-LR |
5.2.1 |
|
Short reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-SR4 |
5.2.1 |
|
Long reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-LR4 |
5.2.1 |
|
96 CXP-100G-SR12 optical module |
NCS-FAB-OPT |
5.2.1 |
|
2X100GE MS PAYG Card with CPAK |
NC6-2-10x100G-M-K |
5.2.1 |
|
2X100GE LSR PAYG Card with CPAK |
NC6-2-10x100G-L-K |
5.2.1 |
|
30x10GE MS PAYG Card with SFPP |
NC6-30x10G-M-S |
5.2.1 |
|
30x10GE LSR PAYG Card with SFPP |
NC6-30x10G-L-S |
5.2.1 |
|
Craft Panel |
NCS-CRFT |
5.2.1 |
|
60-port 10Gbps SFP+ Lean Core Line card |
NC6-60X10GE-L-S |
5.0.1 |
|
60-port 10Gbps SFP+ Multi-Service Core Line card |
NC6-60X10GE-M-S |
5.0.1 |
|
Cisco 10GBASE-SR SFP+ Module for MMF |
SFP-10G-SR |
5.0.1 |
|
Cisco 10GBASE-SR SFP+ Module for MMF, extended temperature range |
SFP-10G-SR-X |
5.0.1 |
|
Cisco 10GBASE-LR SFP+ Module for SMF |
SFP-10G-LR |
5.0.1 |
|
Cisco multirate 10GBASE-LR, 10GBASE-LW and OTU2e SFP+ Module for SMF, extended temperature range |
SFP-10G-LR-X |
5.0.1 |
|
Cisco 10GBASE-ER SFP+ Module for SMF |
SFP-10G-ER |
5.0.1 |
|
Cisco 10GBASE-ZR SFP+ Module for SMF |
SFP-10G-ZR |
5.0.1 |
|
NCS 6008 - 8-Slot Chassis |
NCS-6008 |
5.0.0 |
|
NCS 6008 Fabric Card |
NC6-FC |
5.0.0 |
|
NCS 6008 Route Processor |
NC6-RP |
5.0.0 |
|
NCS 6008 Chassis Fan Tray |
NC6-FANTRAY |
5.0.0 |
|
NCS AC Power Tray |
NCS-AC-PWRTRAY |
5.0.0 |
|
NCS DC Power Tray |
NCS-DC-PWRTRAY |
5.0.0 |
|
NCS PDU Bracket |
NCS-PDU-BRKT |
5.0.0 |
|
NCS 6008 3-to-1 Phase DELTA PDU |
NCS-PDU-DELTA |
5.0.0 |
|
NCS 6008 3-to-1 Phase WYE PDU |
NCS-PDU-WYE |
5.0.0 |
|
NCS 100x10GE Patch Panel Short Reach |
NCS-PP-100X10-SR |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CPAK |
NC6-10X100G-M-K |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CXP |
NC6-10X100G-M-P |
5.0.0 |
|
NCS 6000 10x100G LSR CPAK |
NC6-10X100G-L-K |
5.0.0 |
|
NCS 6000 10x100G LSR CXP |
NC6-10X100G-L-P |
5.0.0 |
|
NCS Craft Panel Display Kit |
NCS-CRFT |
5.0.0 |
|
NCS 6008 Chassis Front Doors |
NC6-DOOR-F |
5.0.0 |
|
NCS 6008 Chassis Rear Doors |
NC6-DOOR-R |
5.0.0 |
|
NCS 6008 Chassis Drill Template |
NC6-DRILLTEMP |
5.0.0 |
|
NCS 6008 Chassis Front-Bottom Grille |
NC6-GRILLE-FB |
5.0.0 |
|
NCS 6008 Chassis Front-Top Grille |
NC6-GRILLE-FT |
5.0.0 |
|
NCS 6008 Chassis Rear Grille |
NC6-GRILLE-R |
5.0.0 |
|
NCS 6008 Power Control Module |
NC6-PCM |
5.0.0 |
|
NCS 6008 Chassis Trough |
NC6-TROUGH |
5.0.0 |
|
NCS 6008 Chassis Trough Wide |
NC6-TROUGH-W |
5.0.0 |
|
NCS 6008 & NCS Fabric Chassis Lift Dolly |
NCS-LIFT |
5.0.0 |
|
10X10G-LR Cisco CPAK module for SMF |
CPAK-10X10G-LR |
5.0.0 |
|
CPAK-100G-LR4 Transceiver module, 10 km SMF |
CPAK-100G-LR4 |
5.0.0 |
|
CXP-100G-SR10 transceiver Module |
CXP-100G-SR10 |
5.0.0 |
Firmware Support
To check the firmware code running on the Cisco NCS 6000 Series Router, run the show fpd package command in admin mode.
RP/0/RP0/CPU0:router(admin)#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
NC6-10X100G-L-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
LTC2978_540867_ISP(A) YES 1.00 1.00 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-L-P Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
LTC2978_540869_ISP(A) YES 1.00 1.00 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
Slice-2-GN2411(A) YES 5.86 5.86 2.0
Slice-2-GN2411(A) YES 7.58 7.58 0.0
Slice-3-GN2411(A) YES 5.86 5.86 2.0
Slice-3-GN2411(A) YES 7.58 7.58 0.0
Slice-4-GN2411(A) YES 5.86 5.86 2.0
Slice-4-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-P Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
Slice-2-GN2411(A) YES 5.86 5.86 2.0
Slice-2-GN2411(A) YES 7.58 7.58 0.0
Slice-3-GN2411(A) YES 5.86 5.86 2.0
Slice-3-GN2411(A) YES 7.58 7.58 0.0
Slice-4-GN2411(A) YES 5.86 5.86 2.0
Slice-4-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-L-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-M-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-L-C Backup-BIOS(A) YES 1.08 1.08 0.1
Backup-CCC-PwrOn(A) NO 1.11 1.10 0.0
Backup-EthSwitch(A) YES 1.00 1.00 0.0
Backup-EthSwitch(A) YES 1.14 1.14 0.2
Backup-SolDBfpga(A) NO 1.04 1.04 0.0
Backup-SolMBfpga(A) NO 1.04 1.04 0.0
CCC-Bootloader(A) YES 1.08 1.08 0.0
CCC-FPGA(A) YES 1.08 1.08 0.0
CCC-Power-On(A) NO 1.11 1.11 0.0
Ethernet-Switch(A) YES 1.00 1.00 0.0
Ethernet-Switch(A) YES 1.14 1.14 0.2
PLX-8749(A) YES 0.06 0.06 0.1
Primary-BIOS(A) YES 1.08 1.08 0.1
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SOL-DB-FPGA(A) NO 1.04 1.04 0.0
SOL-MB-FPGA(A) NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-M-C Backup-BIOS(A) YES 1.08 1.08 0.1
Backup-CCC-PwrOn(A) NO 1.11 1.10 0.0
Backup-EthSwitch(A) YES 1.00 1.00 0.0
Backup-EthSwitch(A) YES 1.14 1.14 0.2
Backup-SolDBfpga(A) NO 1.04 1.04 0.0
Backup-SolMBfpga(A) NO 1.04 1.04 0.0
CCC-Bootloader(A) YES 1.08 1.08 0.0
CCC-FPGA(A) YES 1.08 1.08 0.0
CCC-Power-On(A) NO 1.11 1.11 0.0
Ethernet-Switch(A) YES 1.00 1.00 0.0
Ethernet-Switch(A) YES 1.14 1.14 0.2
PLX-8749(A) YES 0.06 0.06 0.1
Primary-BIOS(A) YES 1.08 1.08 0.1
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SOL-DB-FPGA(A) NO 1.04 1.04 0.0
SOL-MB-FPGA(A) NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-L-S Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 0.29 0.29 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
Modena-0-PHY(A) YES 0.13 0.13 0.0
Modena-1-PHY(A) YES 0.13 0.13 0.0
Modena-10-PHY(A) YES 0.13 0.13 0.0
Modena-11-PHY(A) YES 0.13 0.13 0.0
Modena-12-PHY(A) YES 0.13 0.13 0.0
Modena-13-PHY(A) YES 0.13 0.13 0.0
Modena-14-PHY(A) YES 0.13 0.13 0.0
Modena-15-PHY(A) YES 0.13 0.13 0.0
Modena-2-PHY(A) YES 0.13 0.13 0.0
Modena-3-PHY(A) YES 0.13 0.13 0.0
Modena-4-PHY(A) YES 0.13 0.13 0.0
Modena-5-PHY(A) YES 0.13 0.13 0.0
Modena-6-PHY(A) YES 0.13 0.13 0.0
Modena-7-PHY(A) YES 0.13 0.13 0.0
Modena-8-PHY(A) YES 0.13 0.13 0.0
Modena-9-PHY(A) YES 0.13 0.13 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
Slice-2-GN2411(A) YES 5.86 5.86 2.0
Slice-2-GN2411(A) YES 7.58 7.58 0.0
Slice-3-GN2411(A) YES 5.86 5.86 2.0
Slice-3-GN2411(A) YES 7.58 7.58 0.0
Slice-4-GN2411(A) YES 5.86 5.86 2.0
Slice-4-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-M-S Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 0.29 0.29 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
Modena-0-PHY(A) YES 0.13 0.13 0.0
Modena-1-PHY(A) YES 0.13 0.13 0.0
Modena-10-PHY(A) YES 0.13 0.13 0.0
Modena-11-PHY(A) YES 0.13 0.13 0.0
Modena-12-PHY(A) YES 0.13 0.13 0.0
Modena-13-PHY(A) YES 0.13 0.13 0.0
Modena-14-PHY(A) YES 0.13 0.13 0.0
Modena-15-PHY(A) YES 0.13 0.13 0.0
Modena-2-PHY(A) YES 0.13 0.13 0.0
Modena-3-PHY(A) YES 0.13 0.13 0.0
Modena-4-PHY(A) YES 0.13 0.13 0.0
Modena-5-PHY(A) YES 0.13 0.13 0.0
Modena-6-PHY(A) YES 0.13 0.13 0.0
Modena-7-PHY(A) YES 0.13 0.13 0.0
Modena-8-PHY(A) YES 0.13 0.13 0.0
Modena-9-PHY(A) YES 0.13 0.13 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-4-10X100G-M-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-6-10X100G-L-K Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 1.06 1.06 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-L-S Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 0.29 0.29 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
Modena-0-PHY(A) YES 0.13 0.13 0.0
Modena-1-PHY(A) YES 0.13 0.13 0.0
Modena-10-PHY(A) YES 0.13 0.13 0.0
Modena-11-PHY(A) YES 0.13 0.13 0.0
Modena-12-PHY(A) YES 0.13 0.13 0.0
Modena-13-PHY(A) YES 0.13 0.13 0.0
Modena-14-PHY(A) YES 0.13 0.13 0.0
Modena-15-PHY(A) YES 0.13 0.13 0.0
Modena-2-PHY(A) YES 0.13 0.13 0.0
Modena-3-PHY(A) YES 0.13 0.13 0.0
Modena-4-PHY(A) YES 0.13 0.13 0.0
Modena-5-PHY(A) YES 0.13 0.13 0.0
Modena-6-PHY(A) YES 0.13 0.13 0.0
Modena-7-PHY(A) YES 0.13 0.13 0.0
Modena-8-PHY(A) YES 0.13 0.13 0.0
Modena-9-PHY(A) YES 0.13 0.13 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
Slice-2-GN2411(A) YES 5.86 5.86 2.0
Slice-2-GN2411(A) YES 7.58 7.58 0.0
Slice-3-GN2411(A) YES 5.86 5.86 2.0
Slice-3-GN2411(A) YES 7.58 7.58 0.0
Slice-4-GN2411(A) YES 5.86 5.86 2.0
Slice-4-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-M-S Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 0.29 0.29 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
LTC2978_540870_DB_ISP(A) YES 1.00 1.00 0.0
LTC2978_540870_MB_ISP(A) YES 1.00 1.00 0.0
Modena-0-PHY(A) YES 0.13 0.13 0.0
Modena-1-PHY(A) YES 0.13 0.13 0.0
Modena-10-PHY(A) YES 0.13 0.13 0.0
Modena-11-PHY(A) YES 0.13 0.13 0.0
Modena-12-PHY(A) YES 0.13 0.13 0.0
Modena-13-PHY(A) YES 0.13 0.13 0.0
Modena-14-PHY(A) YES 0.13 0.13 0.0
Modena-15-PHY(A) YES 0.13 0.13 0.0
Modena-2-PHY(A) YES 0.13 0.13 0.0
Modena-3-PHY(A) YES 0.13 0.13 0.0
Modena-4-PHY(A) YES 0.13 0.13 0.0
Modena-5-PHY(A) YES 0.13 0.13 0.0
Modena-6-PHY(A) YES 0.13 0.13 0.0
Modena-7-PHY(A) YES 0.13 0.13 0.0
Modena-8-PHY(A) YES 0.13 0.13 0.0
Modena-9-PHY(A) YES 0.13 0.13 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY Fantray-FPGA(A) NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY-2 Fantray-FPGA(A) NO 3.05 3.05 0.0
--------------------------------------------------------------------------------
NC6-FC CCC-FPGA(A) YES 1.29 1.29 0.0
CCC-Power-On(A) NO 1.39 1.39 0.0
LTC2978_420830_ISP(A) YES 1.00 1.00 0.0
PLX-8713(A) YES 1.03 1.03 0.1
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
NC6-FC-MC Back-CRE-FPGA-MB(A) YES 1.00 1.00 0.0
CCC-FPGA(A) YES 1.29 1.29 0.0
CCC-Power-On(A) NO 1.39 1.39 0.0
CRE-FPGA-MB(A) YES 1.00 1.00 0.0
GN2411-BUS-0(A) YES 5.86 5.86 2.0
GN2411-BUS-0(A) YES 7.58 7.58 0.0
GN2411-BUS-1(A) YES 5.86 5.86 2.0
GN2411-BUS-1(A) YES 7.58 7.58 0.0
GN2411-BUS-2(A) YES 5.86 5.86 2.0
GN2411-BUS-2(A) YES 7.58 7.58 0.0
LTC2978_420833_ISP(A) YES 1.00 1.00 0.0
PLX-8713(A) YES 1.03 1.03 0.1
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
NC6-FC2-U CCC-FPGA(A) YES 2.11 2.11 0.0
CCC-Power-On(A) NO 1.39 1.39 0.0
LTC2980_LTC3882_420845_IS( YES 1.00 1.00 0.0
PLX-8713(A) YES 1.05 1.05 0.0
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
NC6-RP Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.42 1.32 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.2
Backup-EthSwitch(A) YES 1.33 1.32 0.1
CCC-Bootloader(A) YES 2.07 2.03 0.0
CCC-FPGA(A) YES 2.07 2.07 0.0
CCC-Power-On(A) NO 1.42 1.42 0.0
CPU Backup_Key(A) NO 1.00 1.00 0.0
CPU Primary_Key(A) NO 1.00 1.00 0.0
CPU-Complex-BOOT(A) YES 4.08 4.04 0.1
CPU-Complex-BOOT(A) YES 0.01 0.01 0.0
CPU-Complex-FPGA(A) YES 4.08 4.08 0.1
CPU-Complex-FPGA(A) YES 0.01 0.01 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.2
Ethernet-Switch(A) YES 1.33 1.33 0.1
LTC2978_1E0800_DB_ISP(A) YES 1.00 1.00 0.0
LTC2978_1E0800_MB_ISP(A) YES 1.00 1.00 0.0
PLX-8748(A) YES 0.05 0.05 0.0
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-CRFT Craft-FCC(A) NO 1.06 1.06 0.1
Craft-LCC(A) NO 1.06 1.06 0.1
--------------------------------------------------------------------------------
NCS-F-FANTRAY Fantray-FPGA(A) NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NCS-F-FC Back-CRE-FPGA-DC(A) YES 1.00 1.00 0.0
Back-CRE-FPGA-MB(A) YES 1.00 1.00 0.0
CCC-FPGA(A) YES 1.29 1.29 0.0
CCC-Power-On(A) NO 1.39 1.39 0.0
CRE-FPGA-DC(A) YES 1.00 1.00 0.0
CRE-FPGA-MB(A) YES 1.00 1.00 0.0
GN2411-BUS-0(A) YES 5.86 5.86 2.0
GN2411-BUS-0(A) YES 7.58 7.58 0.0
GN2411-BUS-1(A) YES 5.86 5.86 2.0
GN2411-BUS-1(A) YES 7.58 7.58 0.0
GN2411-BUS-2(A) YES 5.86 5.86 2.0
GN2411-BUS-2(A) YES 7.58 7.58 0.0
GN2411-BUS-3(A) YES 5.86 5.86 2.0
GN2411-BUS-3(A) YES 7.58 7.58 0.0
GN2411-BUS-4(A) YES 5.86 5.86 2.0
GN2411-BUS-4(A) YES 7.58 7.58 0.0
LTC2978_420834_ISP(A) YES 1.00 1.00 0.0
PLX-8713(A) YES 1.04 1.04 0.1
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
NCS-F-FC2 Back-CRE2-FPGA-DC(A) YES 1.00 1.00 0.0
CCC-FPGA(A) YES 1.10 1.10 0.0
CCC-Power-On(A) NO 1.05 1.05 0.0
CRE2-FPGA-DC(A) YES 1.03 1.03 0.0
LTC2980_LTC3882_42094B_IS( YES 1.00 1.00 0.0
PLX-8713(A) YES 1.05 1.05 0.1
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
NCS-F-SC Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.41 1.38 0.0
Backup-EthSwitch(A) YES 1.33 1.33 0.0
CCC-Bootloader(A) YES 2.03 2.01 0.0
CCC-FPGA(A) YES 2.03 2.03 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
CPU Backup_Key(A) NO 1.00 1.00 0.0
CPU Primary_Key(A) NO 1.00 1.00 0.0
CPU-Complex-BOOT(A) YES 4.08 4.04 0.1
CPU-Complex-BOOT(A) YES 0.01 0.01 0.0
CPU-Complex-FPGA(A) YES 4.08 4.08 0.1
CPU-Complex-FPGA(A) YES 0.01 0.01 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
LTC2978_1F0804_MB_ISP(A) YES 1.00 1.00 0.0
PLX-8625(A) YES 0.02 0.02 0.0
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.41 1.38 0.0
Backup-EthSwitch(A) YES 1.33 1.33 0.0
CCC-Bootloader(A) YES 2.03 2.01 0.0
CCC-FPGA(A) YES 2.03 2.03 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
CPU Backup_Key(A) NO 1.00 1.00 0.0
CPU Primary_Key(A) NO 1.00 1.00 0.0
CPU-Complex-BOOT(A) YES 4.08 4.04 0.1
CPU-Complex-BOOT(A) YES 0.01 0.01 0.0
CPU-Complex-FPGA(A) YES 4.08 4.08 0.1
CPU-Complex-FPGA(A) YES 0.01 0.01 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8625(A) YES 0.02 0.02 0.0
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW (SW) CCC-FPGA(A) YES 1.03 1.03 0.0
CCC-Power-On(A) NO 1.39 1.39 0.0
LTC2978_1F0806_ISP(A) YES 1.00 1.00 0.0
PLX-8614(A) YES 0.03 0.03 0.0
SB Certificates(A) NO 1.00 1.00 0.0
--------------------------------------------------------------------------------
P-L-20X40G-QSFP Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-DB-FPGA(A) NO 0.29 0.29 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
S2-GN2411(A) YES 5.86 5.86 2.0
S2-GN2411(A) YES 7.58 7.58 0.0
S3-GN2411(A) YES 5.86 5.86 2.0
S3-GN2411(A) YES 7.58 7.58 0.0
S4-GN2411(A) YES 5.86 5.86 2.0
S4-GN2411(A) YES 7.58 7.58 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
Slice-2-GN2411(A) YES 5.86 5.86 2.0
Slice-2-GN2411(A) YES 7.58 7.58 0.0
Slice-3-GN2411(A) YES 5.86 5.86 2.0
Slice-3-GN2411(A) YES 7.58 7.58 0.0
Slice-4-GN2411(A) YES 5.86 5.86 2.0
Slice-4-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-QSFP Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-SFP Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
Modena-0-PHY(A) YES 0.13 0.13 0.0
Modena-1-PHY(A) YES 0.13 0.13 0.0
Modena-2-PHY(A) YES 0.13 0.13 0.0
Modena-3-PHY(A) YES 0.13 0.13 0.0
Modena-4-PHY(A) YES 0.13 0.13 0.0
Modena-5-PHY(A) YES 0.13 0.13 0.0
Modena-6-PHY(A) YES 0.13 0.13 0.0
Modena-7-PHY(A) YES 0.13 0.13 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP-L Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 0.29 0.29 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-1XPITA Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-2XPITA Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 1.06 1.06 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8748(A) YES 0.05 0.05 0.1
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-0-GN2411(A) YES 5.86 5.86 2.0
Slice-0-GN2411(A) YES 7.58 7.58 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-F-SC Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.41 1.38 0.0
Backup-EthSwitch(A) YES 1.33 1.33 0.0
CCC-Bootloader(A) YES 2.03 2.01 0.0
CCC-FPGA(A) YES 2.03 2.03 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
CPU Backup_Key(A) NO 1.00 1.00 0.0
CPU Primary_Key(A) NO 1.00 1.00 0.0
CPU-Complex-BOOT(A) YES 4.08 4.04 0.1
CPU-Complex-BOOT(A) YES 0.01 0.01 0.0
CPU-Complex-FPGA(A) YES 4.08 4.08 0.1
CPU-Complex-FPGA(A) YES 0.01 0.01 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
PLX-8625(A) YES 0.02 0.02 0.0
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
SMART-iSATA(A) NO 7.05 7.05 0.0
SMART-SATA(A) NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-NC6K-ATV Backup-BIOS(A) YES 14.09 14.00 0.0
Backup-CCC-PwrOn(A) NO 1.39 1.31 0.0
Backup-EthSwitch(A) YES 1.33 1.32 0.0
BAO-MB-FPGA(A) NO 1.00 1.00 0.0
CCC-Bootloader(A) YES 2.12 2.07 0.0
CCC-FPGA(A) YES 2.12 2.12 0.0
CCC-Power-On(A) NO 1.41 1.41 0.0
Ethernet-Switch(A) YES 1.33 1.33 0.0
Primary-BIOS(A) YES 14.09 14.09 0.0
SB Backup Key(A) NO 1.00 1.00 0.0
SB Certificates(A) NO 1.00 1.00 0.0
SB Primary Key(A) NO 1.00 1.00 0.0
Slice-1-GN2411(A) YES 5.86 5.86 2.0
Slice-1-GN2411(A) YES 7.58 7.58 0.0
--------------------------------------------------------------------------------
PWR-2KW-DC-V2 DT-PriMCU(A) NO 6.03 6.03 0.12
DT-Sec54vMCU(A) NO 6.02 6.02 0.12
DT-Sec5vMCU(A) NO 6.03 6.03 0.12
EM-PriMCU(A) NO 3.12 3.12 0.21
EM-Sec54vMCU(A) NO 3.19 3.19 0.21
EM-Sec5vMCU(A) NO 3.19 3.19 0.21
--------------------------------------------------------------------------------
PWR-3KW-AC-V2 DT-PriMCU(A) NO 6.02 6.02 1.0
DT-Sec54vMCU(A) NO 6.02 6.02 1.0
DT-Sec5vMCU(A) NO 6.04 6.04 1.0
EM-Sec54vMCU(A) NO 3.12 3.12 0.21
EM-Sec5vMCU(A) NO 3.18 3.18 0.21
Minimum Firmware Requirement
The following table provides the procedures and resources for minimum firmware requirements:
|
After completing an Return Material Authorization (RMA), upgrade the firmware as per the matrix in this link, which also links to PDF copies of the IOS XR Firmware Upgrade Guides |
|
|
For the upgrade procedure, see the Performing System Upgrade and Installing Feature Packages chapter of the Cisco NCS 6008 System Setup and Software Installation Guide |
http://www.cisco.com/en/US/products/ps13132/tsd_products_support_series_home.html |
Other Important Information
-
To uniquely identify a line card as a Cisco device, all Cisco IOS XR supported platforms are shipped with a non-tamper-able Trust Anchor Module (TAM) in the hardware. The Cisco Trust Anchor module (TAm) helps verify that Cisco hardware is authentic and provides additional security services. This feature is supported from Cisco IOS XR Release 7.1.x on Cisco NCS 6000 platform.
-
From Release 6.0, the onePK toolkit is not supported.
-
Country-specific laws, regulations, and licenses—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
-
BFD limitation—If the current PPS (packets per second) is more than 7000 packets per line card (LC) then on upgrading the Cisco IOS XR software to release 5.2.5 or later the BFD sessions may shut down. You can avoid this scenario by adjusting the PPS per LC so that the load on a LC does not exceed more than 7000 PPS.
To know the current load (PPS value), use show bfd summary command. Use the bfd address-family ipv4 minimum-interval command to configure BFD timer.
-
Field replacable unit (FRU) removal—For all card removal and replacement (including fabric cards, line cards, fan controller, and RP) follow the instructions provided by Cisco to avoid impact to traffic. See the Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide for procedures.
-
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Technical Support representative to discuss how to engineer a large-scale configuration for your purpose.
Related Documentation
The most current Cisco NCS 6000 Series Router software documentation is located at this URL:
The document containing Cisco IOS XR System Error Messages (SEM) is located at this URL:
https://www.cisco.com/c/en/us/td/docs/ios_xr_sw/error/message/ios-xr-sem-guide.htmlProduction Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco DevNet.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.
Feedback