Release Notes for Cisco NCS 6000 Series Routers, Release 6.3.2
 Note |
Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.
Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience. Do provide feedback about your experience with the Content Hub. |
Note |
This product has reached end-of-life status. For more information see the End-of-Life and End-of-Sale Notices. |
Cisco IOS XR Release 6.3.2 contains all features released in Cisco IOS XR Release 6.3.1. Release 6.3.1 is a limited availability (LA) release. For more information on IOS XR Release 6.3.1 features, see Release Notes for Cisco NCS 6000 Series Routers, IOS XR Release 6.3.1
-
support elastic capacity at the lowest total ownership cost
-
deliver high-bandwidth mobile, video, and cloud services
-
enhance application service offerings
-
increase provisioning speed
-
optimize network economics
The Cisco NCS 6000 series router is engineered for environmental efficiency, with the use of adaptable power consumption. The Cisco NCS 6000 series router is powered by the Cisco nPower Network Processor Units (NPU). These technologies aid the Cisco NCS 6000 series router to achieve the lowest carbon footprint in service provider routing.
The Cisco NCS 6008 router, part of the Cisco NCS 6000 series routers, is the next-generation core routing system that provides industry-leading 16 Tbps of full-duplex network bandwidth through single chassis, and 32 Tbps of full-duplex network bandwidth through multi-chassis with eight line cards per chassis.
The Cisco NCS 6008 router runs on Cisco IOS XR software with Linux as the underlying host operating system. A Kernel-based Virtual Machine (KVM) hypervisor provides a virtualized environment to independently run system administration and routing functions on separate virtual machines. This provision makes the new system versatile and robust, and provides immense flexibility for future expansion without the need for a complete system overhaul.
A multi-slice architecture of line cards enables the system to be configured in a mixed operating mode, simultaneously supporting traffic at 10 Gbps and 100 Gbps on slice-level granularity.
This release notes describe the features provided in the Cisco IOS XR Software Release for the Cisco NCS 6000 series router and are updated as needed.
This electronic documents may contain updates and modifications. For more information on obtaining Cisco documentation, see the Communications, Services, and Additional Information section.
For a list of software caveats that apply to Cisco IOS XR Software Release see the Caveats section.
Cisco IOS XR Software running on the Cisco NCS 6000 Series Router provides the following features and benefits:
-
IP features—This supports a wide range of IPv4 and IPv6 services and routing protocols such as IPv4 unicast services, IPv6 unicast services, IPv4 Multicast services, IPv4 and IPv6 equal-cost multipathing (ECMP), IPv4 and IPv6 load balancing), Cisco Discovery Protocol, IPv4 and IPv6 addressing, Internet Control Message Protocol (ICMP), IPv4 LFA FRR, HSRP, and VRRP.
-
IP Multicast Features—Multicast forwarding with support for source-based and shared distribution trees and protocols such as Protocol Independent Multicast Sparse Mode (PIM-SM), PIM Source Specific Multicast (PIM SSM), Automatic Rendezvous Point (AutoRP), Internet Group Management Protocol (IGMP) versions 2 and 3, and Multicast reverse path forwarding (RPF). The Multicast nonstop forwarding (NSF) and Multicast forwarding information base (MFIB) protocols are supported.
-
Layer 3 routing protocols—This supports routing protocols such as Border Gateway Protocol Version 4 (BGPv4), Open Shortest Path First Version 2 (OSPFv2) and Version 3 (OSPFv3), Intermediate System-to-Intermediate System (IS-IS) Protocol, NSF using graceful restart for IS-IS, OSPF, and BGP.
-
Forwarding features—This supports routing protocols such as Access control lists (ACLs), Qos and class of service (CoS) using modular QoS command-line interface (CLI; MQC), IP packet classification and marking, Queuing (ingress and egress), Policing (ingress and egress), Diagnostic and network management support, Link Bundles, Bi-Direction Forwarding detection ( BFD), LACP, and Ethernet OAM Link Monitoring (IEEE 802.3ah).
-
Multiprotocol Label Switching (MPLS) Features—Supports MPLS features such as MPLS Label Distribution Protocol (LDP), Resource Reservation Protocol (RSVP), Diffserv Aware Traffic Engineering (TE), MPLS Traffic Engineering control plane (RFCs 2702 and 2430), MPLS forwarding, MPLS load balancing, NSF for RSVP and LDP, and MPLS FRR.
-
Security—Features such as Message Digest Algorithm (MD5), Control packet policing, Dynamic control plane protection, and GTSM RFC 3682 (formerly BTSH) are supported.
-
Accounting—This supports features such as IP and MPLS Accounting, Interface Counters and Statistics, and Sampled Netflow ( IPv4, IPv6, and MPLS).
-
Control packet policing
-
Dynamic control plane protection
-
GTSM RFC 3682 (formerly BTSH)
-
Network Management—This supports features like Enhanced CLI, XML interface, Simple Network Management Protocol (SNMP) and MIB support - (SNMPv1,SNMPv2c,SNMPv3), and Cisco Prime Network
-
System redundancy—Features such as Power redundancy 1:1 or 1:N, Fan tray redundancy 1:1, Route processor redundancy 1:1, Virtual machine redundancy, Line-card online insertion and removal (OIR) support, Fabric card OIR support, Out of resource management, and IOS XR redundancy.
What's New in Release 6.3.2
Cisco is continuously enhancing the product with every release and this section covers a brief description of key features and enhancements. It also includes links to detailed documentation, where available.
Software Features Introduced in Cisco IOS XR Software Release 6.3.2
LLDP YANG Models
Link Layer Discovery Protocol (LLDP) YANG model supports configuring event-driven telemetry.
For an example about configuring event-driven telemetry for LLDP, see Configure Model-driven Telemetry chapter in Telemetry Configuration Guide for Cisco NCS 6000 Series Routers.
NETCONF Transport for Event-Driven Telemetry
Support for NETCONF as a transport for event-driven telemetry.
For information about NETCONF notifications, see Configure Model-driven Telemetry chapter in Telemetry Configuration Guide for Cisco NCS 6000 Series Routers.
IS-IS VRF Aware Lite
The feature adds the possibility to run an Integrated Intermediate System-to-Intermediate System (IS-IS) process in the context of a non-default VPN routing and forwarding (VRF). Both IPv4 and IPv6 are supported. The implementation is more suitable for VRF-lite scenarios.
For more information, see the Routing Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.3.x.
RPM Signing and Verification
Cisco IOS XR supports RPM signing and signature verification for Cisco IOS XR RPM packages in the ISO and upgrade images. All RPM packages in the Cisco IOS XR ISO and upgrade images are signed to ensure cryptographic integrity and authenticity. This guarantees that the RPM packages have not been tampered with and the RPM packages are from Cisco IOS XR. The private key, used for signing the RPM packages, is created and securely maintained by Cisco.
IP-MIB Support for IPv4
IOS-XR implementation of IP-MIB now supports IPv4 statistics as per RFC4293. Refer to the SNMP OID Navigator for a list of new OIDs added for iPv4 statistics.
SNMP Trap Support
Support for a new SNMP trap, cefcXrvmModuleStatusChange has been added in Release 6.3.2. For more information on SNMP commands, see System Management Command Reference for the Cisco NCS 6000 Series Routers.
For details about the trap, see SNMP Object navigator page.
Enhancements to Programmability
Cisco IOS XR supports Network-Instance, LLDP, and ISIS Open Config Models. These models have YANG models defined for configuration and operational data.
For more information about YANG data models and configuration, see Using Data Models chapter in Programmability Configuration Guide for Cisco NCS 6000 Series Routers.
Behavior Change Introduced in Cisco IOS XR Release 6.3.2
From this release onwards address-family is a mandatory keyword for the show tech-support multicast command. The command syntax is:
show tech multicast address-family <ipv4/ipv6>.
For more information, refer the show tech-support multicast command in the Tech-Support Commands chapter of the Advance System Command Reference for Cisco NCS 6000 Series Routers.
Hardware Features
The Cisco IOS XR Software Release 6.3.2 introduces the following hardware support:
-
NCS-F-FC2—Cisco NCS 6000 2T (2nd Generation) S2 Fabric Card is the next generation fabric card for the Cisco NCS 6000 Fabric Card Chassis. The Cisco NCS 6000 2T fabric card provides 2T multi-chassis configurations between the Cisco NCS 6000 Fabric Card Chassis and the Cisco NCS 6000 Line Card Chassis with Universal Fabric Cards and 2T line cards (requires CXP2 optical modules in the fabric cards).
For more information on the Cisco NCS 6000 2T fabric card, see the Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide.
For information on migrating to a 2T multi-chassis system, see the Cisco Network Convergence System 6000 2T Migration Guide.
The 20-port 100Gbps Lean Core and Multi-Service Core line card supports these optics starting IOS XR Software Release 6.3.2:
-
2T Optics support:
-
QSFP-100G-PSM4-S
-
QSFP-100G-CWDM4-S
-
QSFP-100G-SM-SR
-
Other Important Information
-
To uniquely identify a line card as a Cisco device, all Cisco IOS XR supported platforms are shipped with a non-tamper-able Trust Anchor Module (TAM) in the hardware. The Cisco Trust Anchor module (TAm) helps verify that Cisco hardware is authentic and provides additional security services. This feature is supported from Cisco IOS XR Release 7.1.x on Cisco NCS 6000 platform.
-
From Release 6.0, the onePK toolkit is not supported.
-
Country-specific laws, regulations, and licenses—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
-
BFD limitation—If the current PPS (packets per second) is more than 7000 packets per line card (LC) then on upgrading the Cisco IOS XR software to release 5.2.5 or later the BFD sessions may shut down. You can avoid this scenario by adjusting the PPS per LC so that the load on a LC does not exceed more than 7000 PPS.
To know the current load (PPS value), use show bfd summary command. Use the bfd address-family ipv4 minimum-interval command to configure BFD timer.
-
Field replacable unit (FRU) removal—For all card removal and replacement (including fabric cards, line cards, fan controller, and RP) follow the instructions provided by Cisco to avoid impact to traffic. See the Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide for procedures.
-
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Technical Support representative to discuss how to engineer a large-scale configuration for your purpose.
Caveats
Caveats describe unexpected behavior in Cisco IOS XR Software releases. Severity-1 caveats are the most critical caveats; severity-2 caveats are less critical.
Cisco IOS XR Caveats
|
Bug ID |
Headline |
|---|---|
|
Convergence delay of upto 15sec with main/sub interface shutdown |
|
|
FRR shutdown notification not processed on sub-interface |
Caveats Specific to the NCS 6000 Series Routers
|
Bug ID |
Headline |
|---|---|
| CSCvi17507 |
2T: >75% Multicast traffic running on a LC impacted when remote LC OIR is performed |
Release 6.3.2 Packages
This table lists the Cisco IOS XR Software feature set matrix (packages) and associated filenames available for the Cisco IOS XR Software Release 6.3.2 that is supported on the Cisco NCS 6008 router.
|
Feature Set |
Filename |
Description |
|
Composite Package |
||
|
Cisco IOS XR IP Unicast Routing Core Bundle |
ncs6k-mini-x.iso-6.3.2 |
Contains required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, FPD, and Alarm Correlation. |
|
Optional Individual Packages (packages that are installed individually) |
||
|
Cisco IOS XR Manageability Package |
ncs6k-mgbl.pkg-6.3.2 |
Extensible Markup Language (XML) Parser and HTTP server packages. |
|
Cisco IOS XR MPLS Package |
ncs6k-mpls.pkg-6.3.2 |
MPLS Traffic Engineering (MPLS-TE), Label Distribution Protocol (LDP), MPLS Forwarding, MPLS Operations, Administration, and Maintenance (OAM), Link Manager Protocol (LMP), Optical User Network Interface (OUNI), Resource Reservation Protocol (RSVP), and Layer-3 VPN. |
|
Cisco IOS XR Multicast Package |
ncs6k-mcast.pkg-6.3.2 |
Multicast Routing Protocols (PIM, Multicast Source Discovery Protocol [MSDP], Internet Group Management Protocol [IGMP], Auto-RP), Tools (SAP, MTrace), and Infrastructure [(Multicast Routing Information Base [MRIB], Multicast-Unicast RIB [MURIB], Multicast forwarding [MFWD]). |
|
Cisco IOS XR Security Package |
ncs6k-k9sec.pkg-6.3.2 |
Support for Encryption, Decryption, IP Security (IPSec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI) (Software based IPSec support—maximum of 500 tunnels) |
|
Cisco IOS XR Lawful Intercept (LI) Package |
ncs6k-li.pkg-6.3.2 |
Supports Lawful Intercept (LI) features. |
|
Cisco IOS XR Documentation Package |
ncs6k-doc.pkg-6.3.2 |
.man pages for Cisco IOS XR Software. |
|
Feature Set |
Filename |
Description |
|---|---|---|
|
Cisco IOS XR IP/MPLS Core Software |
ncs6k-iosxr-6.3.2.tar |
|
|
Cisco IOS XR IP/MPLS Core Software 3DES |
ncs6k-iosxr-k9-6.3.2.tar |
|
Determining Installed Active Packages
To determine active software packages installed on the router, log in to the router and enter the show install active command in EXEC mode:
RP/0/RP0/CPU0:router# show install active
Active Packages: 7
ncs6k-xr-6.3.2 version=6.3.2 [Boot image]
ncs6k-mcast-1.0.0.0-r632
ncs6k-mpls-1.0.0.0-r632
ncs6k-mgbl-2.0.0.0-r632
ncs6k-doc-1.0.0.0-r632
ncs6k-k9sec-2.0.0.0-r632
ncs6k-li-1.0.0.0-r632
Supported Packages and System Requirements
This section describes the system requirements for Cisco NCS 6000 Series Routers for Software Release .
Memory Requirements
The minimum memory requirements for a Cisco NCS 6008 router running Cisco IOS XR Software Release consist of the following:
-
48 GB memory on the NCS 6008 Route Processors (NCS6-RP)
-
16 GB memory on 1T line cards
-
32 GB memory on 2T line cards
In order to avoid low memory conditions during system operations, it is recommended that you have 2000MB of free memory available on the Route Processors.
Supported Hardware
The following table lists the supported hardware components on the Cisco NCS 6000 Series Router and the minimum required software release. For more information, see the Firmware Support section.
|
Component |
Part Number |
Support from Release |
|---|---|---|
|
Second-generation S2 fabric card for the FCC with 32 CXP2 ports for 270GE SR25 CXP2s |
NCS-F-FC2 |
6.3.2 |
|
CXP2 - 270GE SR25 transceiver module |
ONS-CXP2-SR25 |
6.3.2 |
|
96 ONS-CXP2-SR25 optical modules |
NCS-FAB-OPT2 |
6.3.2 |
|
Cisco 100GBASE SR4 QSFP Transceiver Cisco 100GBASE LR4 QSFP Transceiver |
QSFP-100G-SR4-S QSFP-100G-LR4-S |
6.2.2 |
|
20-port 100Gbps Lean Core |
NC6-20X100GE-L-C |
6.2.2 |
|
20-port 100Gbps Multi-Service Core |
NC6-20X100GE-M-C |
6.2.2 |
|
Universal Fabric Card |
NC6-FC2-U |
6.2.1 |
|
Cisco NCS 6008 FT, version 2 |
NC6-FANTRAY-2 |
6.1.2 |
|
CPAK optical transceiver module, 100GBASE-SR4, 100m OM4 |
CPAK-100G-SR4 |
6.1.2 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics |
NC6-FC-MC |
5.2.1 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics Spare |
NC6-FC-MC= |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs |
NCS-F-FC |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs Spare |
NCS-F-FC= |
5.2.1 |
|
FCC shelf controllers |
NCS-F-SC |
5.2.1 |
|
FCC shelf controllers Spare |
NCS-F-SC= |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card |
NCS-F-SCSW |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card Spare |
NCS-F-SCSW= |
5.2.1 |
|
Short reach SFP 10GE transceiver module |
SFP-10G-SR |
5.2.1 |
|
Long reach SFP 10GE transceiver module |
SFP-10G-LR |
5.2.1 |
|
Short reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-SR4 |
5.2.1 |
|
Long reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-LR4 |
5.2.1 |
|
96 CXP-100G-SR12 optical module |
NCS-FAB-OPT |
5.2.1 |
|
2X100GE MS PAYG Card with CPAK |
NC6-2-10x100G-M-K |
5.2.1 |
|
2X100GE LSR PAYG Card with CPAK |
NC6-2-10x100G-L-K |
5.2.1 |
|
30x10GE MS PAYG Card with SFPP |
NC6-30x10G-M-S |
5.2.1 |
|
30x10GE LSR PAYG Card with SFPP |
NC6-30x10G-L-S |
5.2.1 |
|
Craft Panel |
NCS-CRFT |
5.2.1 |
|
NCS 6008 - 8-Slot Chassis |
NCS-6008 |
5.0.0 |
|
NCS 6008 Fabric Card |
NC6-FC |
5.0.0 |
|
NCS 6008 Route Processor |
NC6-RP |
5.0.0 |
|
NCS 6008 Chassis Fan Tray |
NC6-FANTRAY |
5.0.0 |
|
NCS AC Power Tray |
NCS-AC-PWRTRAY |
5.0.0 |
|
NCS DC Power Tray |
NCS-DC-PWRTRAY |
5.0.0 |
|
NCS PDU Bracket |
NCS-PDU-BRKT |
5.0.0 |
|
NCS 6008 3-to-1 Phase DELTA PDU |
NCS-PDU-DELTA |
5.0.0 |
|
NCS 6008 3-to-1 Phase WYE PDU |
NCS-PDU-WYE |
5.0.0 |
|
NCS 100x10GE Patch Panel Short Reach |
NCS-PP-100X10-SR |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CPAK |
NC6-10X100G-M-K |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CXP |
NC6-10X100G-M-P |
5.0.0 |
|
NCS 6000 10x100G LSR CPAK |
NC6-10X100G-L-K |
5.0.0 |
|
NCS 6000 10x100G LSR CXP |
NC6-10X100G-L-P |
5.0.0 |
|
NCS Craft Panel Display Kit |
NCS-CRFT |
5.0.0 |
|
NCS 6008 Chassis Front Doors |
NC6-DOOR-F |
5.0.0 |
|
NCS 6008 Chassis Rear Doors |
NC6-DOOR-R |
5.0.0 |
|
NCS 6008 Chassis Drill Template |
NC6-DRILLTEMP |
5.0.0 |
|
NCS 6008 Chassis Front-Bottom Grille |
NC6-GRILLE-FB |
5.0.0 |
|
NCS 6008 Chassis Front-Top Grille |
NC6-GRILLE-FT |
5.0.0 |
|
NCS 6008 Chassis Rear Grille |
NC6-GRILLE-R |
5.0.0 |
|
NCS 6008 Power Control Module |
NC6-PCM |
5.0.0 |
|
NCS 6008 Chassis Trough |
NC6-TROUGH |
5.0.0 |
|
NCS 6008 Chassis Trough Wide |
NC6-TROUGH-W |
5.0.0 |
|
NCS 6008 & NCS Fabric Chassis Lift Dolly |
NCS-LIFT |
5.0.0 |
|
10X10G-LR Cisco CPAK module for SMF |
CPAK-10X10G-LR |
5.0.0 |
|
CPAK-100G-LR4 Transceiver module, 10 km SMF |
CPAK-100G-LR4 |
5.0.0 |
|
CXP-100G-SR10 transceiver Module |
CXP-100G-SR10 |
5.0.0 |
Firmware Support
To check the firmware code running on the Cisco NCS 6000 Series Router, run the show fpd package command in admin mode.
RP/0/RP0/CPU0:router(admin)#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
NC6-10X100G-L-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-L-P Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-P Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-L-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-M-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-L-C Backup-BIOS YES 1.08 1.08 0.1
Backup-CCC-PwrOn NO 1.11 1.10 0.0
Backup-EthSwitch YES 1.00 1.00 0.0
Backup-EthSwitch YES 1.14 1.14 0.2
Backup-SolDBfpga NO 1.04 1.04 0.0
Backup-SolMBfpga NO 1.04 1.04 0.0
CCC-Bootloader YES 1.08 1.08 0.0
CCC-FPGA YES 1.08 1.08 0.0
CCC-Power-On NO 1.11 1.11 0.0
Ethernet-Switch YES 1.00 1.00 0.0
Ethernet-Switch YES 1.14 1.14 0.2
PLX-8749 YES 0.06 0.06 0.1
Primary-BIOS YES 1.08 1.08 0.1
SOL-DB-FPGA NO 1.04 1.04 0.0
SOL-MB-FPGA NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-M-C Backup-BIOS YES 1.08 1.08 0.1
Backup-CCC-PwrOn NO 1.11 1.10 0.0
Backup-EthSwitch YES 1.00 1.00 0.0
Backup-EthSwitch YES 1.14 1.14 0.2
Backup-SolDBfpga NO 1.04 1.04 0.0
Backup-SolMBfpga NO 1.04 1.04 0.0
CCC-Bootloader YES 1.08 1.08 0.0
CCC-FPGA YES 1.08 1.08 0.0
CCC-Power-On NO 1.11 1.11 0.0
Ethernet-Switch YES 1.00 1.00 0.0
Ethernet-Switch YES 1.14 1.14 0.2
PLX-8749 YES 0.06 0.06 0.1
Primary-BIOS YES 1.08 1.08 0.1
SOL-DB-FPGA NO 1.04 1.04 0.0
SOL-MB-FPGA NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-L-S Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-M-S Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-4-10X100G-M-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-6-10X100G-L-K Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-L-S Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-M-S Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY Fantray-FPGA NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY-2 Fantray-FPGA NO 3.05 3.05 0.0
--------------------------------------------------------------------------------
NC6-FC CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8713 YES 1.03 1.03 0.1
--------------------------------------------------------------------------------
NC6-FC-MC Back-CRE-FPGA-MB YES 1.00 1.00 0.0
CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
CRE-FPGA-MB YES 1.00 1.00 0.0
GN2411-BUS-0 YES 5.86 5.86 2.0
GN2411-BUS-0 YES 7.58 7.58 0.0
GN2411-BUS-1 YES 5.86 5.86 2.0
GN2411-BUS-1 YES 7.58 7.58 0.0
GN2411-BUS-2 YES 5.86 5.86 2.0
GN2411-BUS-2 YES 7.58 7.58 0.0
PLX-8713 YES 1.03 1.03 0.1
--------------------------------------------------------------------------------
NC6-FC2-U CCC-FPGA YES 2.11 2.11 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8713 YES 1.05 1.05 0.0
--------------------------------------------------------------------------------
NC6-RP Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.42 1.32 0.0
Backup-EthSwitch YES 1.33 1.32 0.2
Backup-EthSwitch YES 1.33 1.32 0.1
CCC-Bootloader YES 2.07 2.03 0.0
CCC-FPGA YES 2.07 2.07 0.0
CCC-Power-On NO 1.42 1.42 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.2
Ethernet-Switch YES 1.33 1.33 0.1
PLX-8748 YES 0.05 0.05 0.0
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-CRFT Craft-FCC NO 1.06 1.06 0.1
Craft-LCC NO 1.06 1.06 0.1
--------------------------------------------------------------------------------
NCS-F-FANTRAY Fantray-FPGA NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NCS-F-FC Back-CRE-FPGA-DC YES 1.00 1.00 0.0
Back-CRE-FPGA-MB YES 1.00 1.00 0.0
CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
CRE-FPGA-DC YES 1.00 1.00 0.0
CRE-FPGA-MB YES 1.00 1.00 0.0
GN2411-BUS-0 YES 5.86 5.86 2.0
GN2411-BUS-0 YES 7.58 7.58 0.0
GN2411-BUS-1 YES 5.86 5.86 2.0
GN2411-BUS-1 YES 7.58 7.58 0.0
GN2411-BUS-2 YES 5.86 5.86 2.0
GN2411-BUS-2 YES 7.58 7.58 0.0
GN2411-BUS-3 YES 5.86 5.86 2.0
GN2411-BUS-3 YES 7.58 7.58 0.0
GN2411-BUS-4 YES 5.86 5.86 2.0
GN2411-BUS-4 YES 7.58 7.58 0.0
PLX-8713 YES 1.04 1.04 0.1
--------------------------------------------------------------------------------
NCS-F-FC2 Back-CRE2-FPGA-DC YES 1.00 1.00 0.0
CCC-FPGA YES 1.03 1.03 0.0
CCC-Power-On NO 1.05 1.05 0.0
CRE2-FPGA-DC YES 1.00 1.00 0.0
PLX-8713 YES 1.05 1.05 0.1
--------------------------------------------------------------------------------
NCS-F-SC Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW (SW) CCC-FPGA YES 1.03 1.03 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8614 YES 0.03 0.03 0.0
--------------------------------------------------------------------------------
P-L-20X40G-QSFP Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-QSFP Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-SFP Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP-L Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-1XPITA Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-2XPITA Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.04 0.04 0.1
Primary-BIOS YES 14.08 14.08 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-F-SC Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.08 14.08 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-NC6K-ATV Backup-BIOS YES 14.08 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.00 1.00 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Primary-BIOS YES 14.08 14.08 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
--------------------------------------------------------------------------------
PWR-2KW-DC-V2 DT-PriMCU NO 6.03 6.03 0.12
DT-Sec54vMCU NO 6.02 6.02 0.12
DT-Sec5vMCU NO 6.03 6.03 0.12
EM-PriMCU NO 3.12 3.12 0.21
EM-Sec54vMCU NO 3.19 3.19 0.21
EM-Sec5vMCU NO 3.19 3.19 0.21
--------------------------------------------------------------------------------
PWR-3KW-AC-V2 DT-PriMCU NO 6.02 6.02 1.0
DT-Sec54vMCU NO 6.02 6.02 1.0
DT-Sec5vMCU NO 6.04 6.04 1.0
EM-Sec54vMCU NO 3.12 3.12 0.21
EM-Sec5vMCU NO 3.18 3.18 0.21
--------------------------------------------------------------------------------
Minimum Firmware Requirement
The following table provides the procedures and resources for minimum firmware requirements:
|
After completing an Return Material Authorization (RMA), upgrade the firmware as per the matrix in this link, which also links to PDF copies of the IOS XR Firmware Upgrade Guides |
|
|
For the upgrade procedure, see the Performing System Upgrade and Installing Feature Packages chapter of the Cisco NCS 6008 System Setup and Software Installation Guide |
http://www.cisco.com/en/US/products/ps13132/tsd_products_support_series_home.html |
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes. Software packages can be upgraded or downgraded on all supported card types, or on a single card (node).
Before starting the software upgrade, use the show install health command in the admin mode. This command validates if the statuses of all relevant parameters of the system are ready for the software upgrade without interrupting the system.
Related Documentation
The most current Cisco NCS 6000 Series Router software documentation is located at this URL:
The document containing Cisco IOS XR System Error Messages (SEM) is located at this URL:
https://www.cisco.com/c/en/us/td/docs/ios_xr_sw/error/message/ios-xr-sem-guide.htmlProduction Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.
Feedback