Release Notes for Cisco NCS 6000 Series Routers, IOS XR Release 7.0.1
 Note |
This software release has reached end-of-life status. For more information see the End-of-Life and End-of-Sale Notices. |
Note |
Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.
Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience. Do provide feedback about your experience with the Content Hub. |
The Cisco Network Convergence System (NCS) 6000 series router delivers outstanding network agility, packet optical convergence, and a system scale measured in petabits per second. It also facilitates the build-out of next-generation core to:
-
support elastic capacity at the lowest total ownership cost
-
deliver high-bandwidth mobile, video, and cloud services
Running the Cisco IOS XR operating system, Cisco's innovative virtualized operating environment, the Cisco NCS 6000 series router advances the concept of distributed routing and virtualization. With Cisco Virtualized IOS XR, the Cisco NCS 6000 series router brings new levels of programmability and virtualization to:
-
enhance application service offerings
-
increase provisioning speed
-
optimize network economics
The Cisco NCS 6000 series router is engineered for environmental efficiency, with the use of adaptable power consumption. The Cisco NCS 6000 series router is powered by the Cisco nPower Network Processor Units (NPU). These technologies aid the Cisco NCS 6000 series router to achieve the lowest carbon footprint in service provider routing.
The Cisco NCS 6008 router, part of the Cisco NCS 6000 series routers, is the next-generation core routing system that provides industry-leading 8 Tbps of full-duplex network bandwidth through single chassis with eight line cards per chassis.
The Cisco NCS 6008 router runs on Cisco IOS XR software with Linux as the underlying host operating system. A Kernel-based Virtual Machine (KVM) hypervisor provides a virtualized environment to independently run system administration and routing functions on separate virtual machines. This provision makes the new system versatile and robust, and provides immense flexibility for future expansion without the need for a complete system overhaul.
A multi-slice architecture of line cards enables the system to be configured in a mixed operating mode, simultaneously supporting traffic at 10 Gbps and 100 Gbps on slice-level granularity.
This electronic documents may contain updates and modifications. For more information on obtaining Cisco documentation, see the Communications, Services, and Additional Information section.
For a list of software caveats that apply to this Release, see the Caveats section. The caveats are updated for every release and are described at http://www.cisco.com.
This release notes describe the features provided in the Cisco IOS XR Software Release . See the Software Features Introduced in Cisco IOS XR Software Release 7.0.1 section in this document for information on new software features.
What's New in Release 7.0.1
Cisco is continuously enhancing the product with every release and this section covers a brief description of key features and enhancements. It also includes links to detailed documentation, where available.
Software
Layer 2 Interface Support on Pseudowire Headend
The Layer 2 Interface Support on Pseudowire Headend feature provides a virtual Layer 2 interface on a pseudowire (PW) for a service provider edge (PE) router. This feature allows termination of access pseudowires (PW) into an L2 domain. This feature allows you to send the L2 traffic over PWs from the access side to the core side. You can provision Lawful Intercept (LI) on a per PWHE interface basis, on a service provider edge (PE) router along with the regular Layer 2 services. This feature reduces the capital expenditure in access and aggregation network. This feature helps the customer network to distribute and scale the customer facing Layer 2 UNI interface set.
Increase in Scale Limit for Pseudowire Headend
The Pseudowire Headend (PWHE) interface scale limit is increased to 9K for 2T line cards. The scale includes all types of PWHE related interfaces, such as PWHE Ethernet, PWHE interworking, PWHE Layer 3 subinterfaces, and PWHE Layer 2 interfaces.
BGP PIC Support on CSI Interfaces
This feature allows you to create a backup path on CSI interfaces. This feature uses the backup path to send traffic during network failure.
Use Inter-SDR Collapsed Forwarding Feature to Forward Packets
The inter-SDR (secure domain routers) collapsed forwarding means that the cross-SDR interconnect (CSI) interface is used for forwarding packets. With the Ingress QoS Classify/Remark request on CSI interface feature, you can now remark the packet headers based on the policy maps attached to the CSI interface.
When the packets arrive at the ingress of an SDR through the CSI interface, the packets are remarked according to the ingress policy map defined for that CSI interface.
Using this remarking feature, you can differentially treat the packets according to the remarked fields in the egress path.
Support for hw-module shut command in configuration mode
From this release onwards, the hw-module shut and hw-module unshut commands are supported in the configuration mode.
This facilitates in automating the network hardware replacement procedure.
Earlier, the hw-module shut command was supported in admin mode.
gRPC Out-of-Band Management Mechanism
Google-defined Remote Procedure Calls (gRPC) supports out-of-band notifications. This provides flexibility to implement policies outside the client.
External Control Plane Feature support on Dell R640 Server
Cisco NCS 6000 supports running external control plane (ECP) feature on Dell R640 server model.
Slice Based SDR
Slice based secure domain router (SDR) feature enables you to configure multiple SDRs, up to two within a line card. SDRs are means of dividing a single physical system into multiple logically separated routers.
Earlier, an SDR boundary was defined at a line card level. Hence, it was necessary to allocate at least one line card to each SDR.
A single line card cannot be shared between multiple SDRs. Each named-SDR will have at least one slice configured.
Note |
This feature is supported only on the 2T line cards. |
For information on SDRs, see the Configuring Secure Domain Routers chapter in the System Management Configuration Guide for Cisco NCS 6000 Series Routers, Release 7.0.x.
MVPN GRE over PWHE with CSI
MVPN GRE over PWHE is supported on CSI interface.
The Multicast VPN (MVPN) feature provides the ability to support multicast over a Layer 3 VPN.
Pseudowire Headend (PWHE) allows termination of access pseudowires (PWs) into a Layer 3 (VRF or global) domain or into a Layer 2 domain.
Layer 2 Interface Support on CSI
The Layer 2 Interface Support on CSI feature provides a Layer 2 connectivity between the Secure Domain Routers (SDRs). This feature introduces a new virtual interface that is called CSI-Ether interface, which enables forwarding of Layer 2 frames between the SDRs.
Some cloud applications in the service provider network, such as the speed test, Internet Protocol Service Level Agreement (IPSLA), and so on, are sensitive to latency and jitter. To avoid extra L3 hops, you can use Layer 2 connectivity between the cloud applications in your network and the customer edge (CE) facing SDRs.
Ltrace Information Stored in Persistent Storage
The ltrace information is now stored in a persistence storage. This helps to store historic ltraces information in the memory. This trace information is used to augment diagnosis of platform issues.
Prior to this release, ltrace information was stored in a shared memory. The shared memory has limited buffer size. When the buffer was full, the historic data was lost.
To view the ltrace information use the show <component> trace file <filename> original location command.
Type 6 Password Encryption
Type 6 password encryption securely stores plain text key strings for authenticating BGP, IP SLA, IS-IS, OSPF, and RSVP sessions.
See Implementing Type 6 Password Encryption.
Commands introduced or modified:
SSHv2 Support for CBC Mode Ciphers
SSHv2 server and client connections support enabling of CBC mode ciphers 3DES-CBC and AES-CBC at the same time. These ciphers are disabled by default.
See SSH Configuration Option to Restrict Cipher Public Key and HMAC Algorithm.
Event-driven Telemetry Support for LLDP
The OpenConfig (OC) data models are defined by the OC community to create configuration and retreive operational state data of the network. This release supports:
-
Event-driven Telemetry support for OC-LLDP data model.
OpenConfig Data Models for Network Programmability
The OpenConfig (OC) data models are defined by the OC community to create configuration and retreive operational state data of the network. This release supports:
-
OC-LLDP data model for event-driven telemetry.
-
OC-Interfaces-Aggregate data model to manage aggregated interfaces. This model augments the existing
oc-interfacesdata model.
Monitor MLDP Events for Telemetry using NETCONF
Event-driven telemetry supports monitoring Multicast Label Distribution Protocol (MLDP) using NETCONF and YANG data model. If there is a state change in MLDP, the router streams data about flow statistics for multicast labels, and control plane statistics for mLDP.
gRPC Network Operations Interface
gRPC Network Operations Interface (gNOI) defines a set of gRPC-based microservices for executing operational commands on network devices. Extensible Manageability Services (EMS) gNOI is the Cisco IOS XR implementation of gNOI. gNOI uses gRPC as the transport protocol and the configuration is same as that of gRPC. These gNOI RPCs are supported:
-
Reboot
-
RebootStatus
-
SetPackage
-
File Get
-
File Remove
Hardware
The following hardware enhancements are introduced in this release
-
Cisco NCS 6000 Series Routers support 8+2 multichassis configuration. With 8+2 multichassis configuration, the system capacity can be increased from 8 Tbps to 128 Tbps of data.
-
QSFP-100G-ER4L-S= support on NCS 6000 2T line cards
Caveats
Caveats describe unexpected behavior in Cisco IOS XR Software releases. Severity-1 caveats are the most critical caveats; severity-2 caveats are less critical.
Cisco IOS XR Caveats
There are no caveats specific to Cisco IOS XR Software Release.
Caveats Specific to the NCS 6000 Series Routers
There are no caveats in this release.
Release 7.0.1 Packages
This table lists the Cisco IOS XR Software feature set matrix (packages) and associated filenames available for the Cisco IOS XR Software Release 7.0.1 that is supported on the Cisco NCS 6008 router.
|
Feature Set |
Filename |
Description |
|
Composite Package |
||
|
Cisco IOS XR IP Unicast Routing Core Bundle |
ncs6k-mini-x.iso-7.0.1 |
Contains required core packages, including OS, Admin, Base, Forwarding, Modular Services Card, Routing, SNMP Agent, FPD, and Alarm Correlation. |
|
Optional Individual Packages (packages that are installed individually) |
||
|
Cisco IOS XR Manageability Package |
ncs6k-mgbl.pkg-7.0.1 |
Extensible Markup Language (XML) Parser and HTTP server packages. |
|
Cisco IOS XR MPLS Package |
ncs6k-mpls.pkg-7.0.1 |
MPLS Traffic Engineering (MPLS-TE), Label Distribution Protocol (LDP), MPLS Forwarding, MPLS Operations, Administration, and Maintenance (OAM), Link Manager Protocol (LMP), Optical User Network Interface (OUNI), Resource Reservation Protocol (RSVP), and Layer-3 VPN. |
|
Cisco IOS XR Multicast Package |
ncs6k-mcast.pkg-7.0.1 |
Multicast Routing Protocols (PIM, Multicast Source Discovery Protocol [MSDP], Internet Group Management Protocol [IGMP], Auto-RP), Tools (SAP, MTrace), and Infrastructure [(Multicast Routing Information Base [MRIB], Multicast-Unicast RIB [MURIB], Multicast forwarding [MFWD]). |
|
Cisco IOS XR Security Package |
ncs6k-k9sec.pkg-7.0.1 |
Support for Encryption, Decryption, IP Security (IPSec), Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI) (Software based IPSec support—maximum of 500 tunnels) |
|
Cisco IOS XR Lawful Intercept (LI) Package |
ncs6k-li.pkg-7.0.1 |
Supports Lawful Intercept (LI) features. |
|
Cisco IOS XR Documentation Package |
ncs6k-doc.pkg-7.0.1 |
.man pages for Cisco IOS XR Software. |
Determining Installed Active Packages
To determine active software packages installed on the router, log in to the router and enter the show install active summary command in EXEC mode:
RP/0/RP0/CPU0:router# show install active
Active Packages: 8
ncs6k-xr-7.0.1 version=7.0.1 [Boot image]
ncs6k-li-1.0.0.0-r701
ncs6k-mgbl-1.0.0.0-r701
ncs6k-doc-1.0.0.0-r701
ncs6k-mcast-1.0.0.0-r701
ncs6k-mpls-1.0.0.0-r701
ncs6k-infra-test-1.0.0.0-r701
ncs6k-k9sec-1.0.0.0-r701
Supported Packages and System Requirements
This section describes the system requirements for Cisco NCS 6000 Series Routers for Software Release 7.0.1.
Memory Requirements
The minimum memory requirements for a Cisco NCS 6008 router running Cisco IOS XR Software Release 7.0.1 consist of the following:
-
48 GB memory on the NCS 6008 Route Processors (NCS6-RP)
-
16 GB memory on 1T line cards
-
32 GB memory on 2T line cards
In order to avoid low memory conditions during system operations, it is recommended that you have 2000MB of free memory available on the Route Processors.
Supported Hardware
The following table lists the supported hardware components on the Cisco NCS 6000 Series Router and the minimum required software release. For more information, see the Firmware Support section.
|
Component |
Part Number |
Support from Release |
|---|---|---|
|
Second-generation S2 fabric card for the FCC with 32 CXP2 ports for 270GE SR25 CXP2s |
NCS-F-FC2 |
6.3.2 |
|
CXP2 - 270GE SR25 transceiver module |
ONS-CXP2-SR25 |
6.3.2 |
|
96 ONS-CXP2-SR25 optical modules |
NCS-FAB-OPT2 |
6.3.2 |
|
Cisco 100GBASE SR4 QSFP Transceiver Cisco 100GBASE LR4 QSFP Transceiver |
QSFP-100G-SR4-S QSFP-100G-LR4-S |
6.2.2 |
|
20-port 100Gbps Lean Core |
NC6-20X100GE-L-C |
6.2.2 |
|
20-port 100Gbps Multi-Service Core |
NC6-20X100GE-M-C |
6.2.2 |
|
Universal Fabric Card |
NC6-FC2-U |
6.2.1 |
|
Cisco NCS 6008 FT, version 2 |
NC6-FANTRAY-2 |
6.1.2 |
|
CPAK optical transceiver module, 100GBASE-SR4, 100m OM4 |
CPAK-100G-SR4 |
6.1.2 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics |
NC6-FC-MC |
5.2.1 |
|
S13 fabric card for LCC with16 CXP ports for 100GE SR optics Spare |
NC6-FC-MC= |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs |
NCS-F-FC |
5.2.1 |
|
S2 fabric card for the FCC with 32 CXP ports for 100GE SR12 CXPs Spare |
NCS-F-FC= |
5.2.1 |
|
FCC shelf controllers |
NCS-F-SC |
5.2.1 |
|
FCC shelf controllers Spare |
NCS-F-SC= |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card |
NCS-F-SCSW |
5.2.1 |
|
FCC shelf controller and switch (SC-SW) card Spare |
NCS-F-SCSW= |
5.2.1 |
|
Short reach SFP 10GE transceiver module |
SFP-10G-SR |
5.2.1 |
|
Long reach SFP 10GE transceiver module |
SFP-10G-LR |
5.2.1 |
|
Short reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-SR4 |
5.2.1 |
|
Long reach QSFP 40GE optical module (SC-SW card only) |
QSFP-40G-LR4 |
5.2.1 |
|
96 CXP-100G-SR12 optical module |
NCS-FAB-OPT |
5.2.1 |
|
2X100GE MS PAYG Card with CPAK |
NC6-2-10x100G-M-K |
5.2.1 |
|
2X100GE LSR PAYG Card with CPAK |
NC6-2-10x100G-L-K |
5.2.1 |
|
30x10GE MS PAYG Card with SFPP |
NC6-30x10G-M-S |
5.2.1 |
|
30x10GE LSR PAYG Card with SFPP |
NC6-30x10G-L-S |
5.2.1 |
|
Craft Panel |
NCS-CRFT |
5.2.1 |
|
60-port 10Gbps SFP+ Lean Core Line card |
NC6-60X10GE-L-S |
5.0.1 |
|
60-port 10Gbps SFP+ Multi-Service Core Line card |
NC6-60X10GE-M-S |
5.0.1 |
|
Cisco 10GBASE-SR SFP+ Module for MMF |
SFP-10G-SR |
5.0.1 |
|
Cisco 10GBASE-SR SFP+ Module for MMF, extended temperature range |
SFP-10G-SR-X |
5.0.1 |
|
Cisco 10GBASE-LR SFP+ Module for SMF |
SFP-10G-LR |
5.0.1 |
|
Cisco multirate 10GBASE-LR, 10GBASE-LW and OTU2e SFP+ Module for SMF, extended temperature range |
SFP-10G-LR-X |
5.0.1 |
|
Cisco 10GBASE-ER SFP+ Module for SMF |
SFP-10G-ER |
5.0.1 |
|
Cisco 10GBASE-ZR SFP+ Module for SMF |
SFP-10G-ZR |
5.0.1 |
|
NCS 6008 - 8-Slot Chassis |
NCS-6008 |
5.0.0 |
|
NCS 6008 Fabric Card |
NC6-FC |
5.0.0 |
|
NCS 6008 Route Processor |
NC6-RP |
5.0.0 |
|
NCS 6008 Chassis Fan Tray |
NC6-FANTRAY |
5.0.0 |
|
NCS AC Power Tray |
NCS-AC-PWRTRAY |
5.0.0 |
|
NCS DC Power Tray |
NCS-DC-PWRTRAY |
5.0.0 |
|
NCS PDU Bracket |
NCS-PDU-BRKT |
5.0.0 |
|
NCS 6008 3-to-1 Phase DELTA PDU |
NCS-PDU-DELTA |
5.0.0 |
|
NCS 6008 3-to-1 Phase WYE PDU |
NCS-PDU-WYE |
5.0.0 |
|
NCS 100x10GE Patch Panel Short Reach |
NCS-PP-100X10-SR |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CPAK |
NC6-10X100G-M-K |
5.0.0 |
|
NCS 6000 10x100G Multi-Service CXP |
NC6-10X100G-M-P |
5.0.0 |
|
NCS 6000 10x100G LSR CPAK |
NC6-10X100G-L-K |
5.0.0 |
|
NCS 6000 10x100G LSR CXP |
NC6-10X100G-L-P |
5.0.0 |
|
NCS Craft Panel Display Kit |
NCS-CRFT |
5.0.0 |
|
NCS 6008 Chassis Front Doors |
NC6-DOOR-F |
5.0.0 |
|
NCS 6008 Chassis Rear Doors |
NC6-DOOR-R |
5.0.0 |
|
NCS 6008 Chassis Drill Template |
NC6-DRILLTEMP |
5.0.0 |
|
NCS 6008 Chassis Front-Bottom Grille |
NC6-GRILLE-FB |
5.0.0 |
|
NCS 6008 Chassis Front-Top Grille |
NC6-GRILLE-FT |
5.0.0 |
|
NCS 6008 Chassis Rear Grille |
NC6-GRILLE-R |
5.0.0 |
|
NCS 6008 Power Control Module |
NC6-PCM |
5.0.0 |
|
NCS 6008 Chassis Trough |
NC6-TROUGH |
5.0.0 |
|
NCS 6008 Chassis Trough Wide |
NC6-TROUGH-W |
5.0.0 |
|
NCS 6008 & NCS Fabric Chassis Lift Dolly |
NCS-LIFT |
5.0.0 |
|
10X10G-LR Cisco CPAK module for SMF |
CPAK-10X10G-LR |
5.0.0 |
|
CPAK-100G-LR4 Transceiver module, 10 km SMF |
CPAK-100G-LR4 |
5.0.0 |
|
CXP-100G-SR10 transceiver Module |
CXP-100G-SR10 |
5.0.0 |
Firmware Support
To check the firmware code running on the Cisco NCS 6000 Series Router, run the show fpd package command in admin mode.
RP/0/RP0/CPU0:router(admin)#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
NC6-10X100G-L-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-L-P Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-10X100G-M-P Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-L-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-2/10X100G-M-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-L-C Backup-BIOS YES 1.08 1.08 0.1
Backup-CCC-PwrOn NO 1.11 1.10 0.0
Backup-EthSwitch YES 1.00 1.00 0.0
Backup-EthSwitch YES 1.14 1.14 0.2
Backup-SolDBfpga NO 1.04 1.04 0.0
Backup-SolMBfpga NO 1.04 1.04 0.0
CCC-Bootloader YES 1.08 1.08 0.0
CCC-FPGA YES 1.08 1.08 0.0
CCC-Power-On NO 1.11 1.11 0.0
Ethernet-Switch YES 1.00 1.00 0.0
Ethernet-Switch YES 1.14 1.14 0.2
PLX-8749 YES 0.06 0.06 0.1
Primary-BIOS YES 1.08 1.08 0.1
SOL-DB-FPGA NO 1.04 1.04 0.0
SOL-MB-FPGA NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-20X100GE-M-C Backup-BIOS YES 1.08 1.08 0.1
Backup-CCC-PwrOn NO 1.11 1.10 0.0
Backup-EthSwitch YES 1.00 1.00 0.0
Backup-EthSwitch YES 1.14 1.14 0.2
Backup-SolDBfpga NO 1.04 1.04 0.0
Backup-SolMBfpga NO 1.04 1.04 0.0
CCC-Bootloader YES 1.08 1.08 0.0
CCC-FPGA YES 1.08 1.08 0.0
CCC-Power-On NO 1.11 1.11 0.0
Ethernet-Switch YES 1.00 1.00 0.0
Ethernet-Switch YES 1.14 1.14 0.2
PLX-8749 YES 0.06 0.06 0.1
Primary-BIOS YES 1.08 1.08 0.1
SOL-DB-FPGA NO 1.04 1.04 0.0
SOL-MB-FPGA NO 1.04 1.04 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-L-S Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-30/60X10G-M-S Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-4-10X100G-M-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-6-10X100G-L-K Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 1.06 1.06 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-L-S Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-60X10GE-M-S Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-10-PHY YES 0.13 0.13 0.0
Modena-11-PHY YES 0.13 0.13 0.0
Modena-12-PHY YES 0.13 0.13 0.0
Modena-13-PHY YES 0.13 0.13 0.0
Modena-14-PHY YES 0.13 0.13 0.0
Modena-15-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
Modena-8-PHY YES 0.13 0.13 0.0
Modena-9-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY Fantray-FPGA NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NC6-FANTRAY-2 Fantray-FPGA NO 3.05 3.05 0.0
--------------------------------------------------------------------------------
NC6-FC CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8713 YES 1.03 1.03 0.1
--------------------------------------------------------------------------------
NC6-FC-MC Back-CRE-FPGA-MB YES 1.00 1.00 0.0
CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
CRE-FPGA-MB YES 1.00 1.00 0.0
GN2411-BUS-0 YES 5.86 5.86 2.0
GN2411-BUS-0 YES 7.58 7.58 0.0
GN2411-BUS-1 YES 5.86 5.86 2.0
GN2411-BUS-1 YES 7.58 7.58 0.0
GN2411-BUS-2 YES 5.86 5.86 2.0
GN2411-BUS-2 YES 7.58 7.58 0.0
PLX-8713 YES 1.03 1.03 0.1
--------------------------------------------------------------------------------
NC6-FC2-U CCC-FPGA YES 2.11 2.11 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8713 YES 1.05 1.05 0.0
--------------------------------------------------------------------------------
NC6-RP Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.42 1.32 0.0
Backup-EthSwitch YES 1.33 1.32 0.2
Backup-EthSwitch YES 1.33 1.32 0.1
CCC-Bootloader YES 2.07 2.03 0.0
CCC-FPGA YES 2.07 2.07 0.0
CCC-Power-On NO 1.42 1.42 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.2
Ethernet-Switch YES 1.33 1.33 0.1
PLX-8748 YES 0.05 0.05 0.0
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-CRFT Craft-FCC NO 1.06 1.06 0.1
Craft-LCC NO 1.06 1.06 0.1
--------------------------------------------------------------------------------
NCS-F-FANTRAY Fantray-FPGA NO 2.01 2.01 0.0
--------------------------------------------------------------------------------
NCS-F-FC Back-CRE-FPGA-DC YES 1.00 1.00 0.0
Back-CRE-FPGA-MB YES 1.00 1.00 0.0
CCC-FPGA YES 1.29 1.29 0.0
CCC-Power-On NO 1.39 1.39 0.0
CRE-FPGA-DC YES 1.00 1.00 0.0
CRE-FPGA-MB YES 1.00 1.00 0.0
GN2411-BUS-0 YES 5.86 5.86 2.0
GN2411-BUS-0 YES 7.58 7.58 0.0
GN2411-BUS-1 YES 5.86 5.86 2.0
GN2411-BUS-1 YES 7.58 7.58 0.0
GN2411-BUS-2 YES 5.86 5.86 2.0
GN2411-BUS-2 YES 7.58 7.58 0.0
GN2411-BUS-3 YES 5.86 5.86 2.0
GN2411-BUS-3 YES 7.58 7.58 0.0
GN2411-BUS-4 YES 5.86 5.86 2.0
GN2411-BUS-4 YES 7.58 7.58 0.0
PLX-8713 YES 1.04 1.04 0.1
--------------------------------------------------------------------------------
NCS-F-FC2 Back-CRE2-FPGA-DC YES 1.00 1.00 0.0
CCC-FPGA YES 1.10 1.10 0.0
CCC-Power-On NO 1.05 1.05 0.0
CRE2-FPGA-DC YES 1.03 1.03 0.0
PLX-8713 YES 1.05 1.05 0.1
--------------------------------------------------------------------------------
NCS-F-SC Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
NCS-F-SCSW (SW) CCC-FPGA YES 1.03 1.03 0.0
CCC-Power-On NO 1.39 1.39 0.0
PLX-8614 YES 0.03 0.03 0.0
--------------------------------------------------------------------------------
P-L-20X40G-QSFP Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-DB-FPGA NO 0.29 0.29 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
S2-GN2411 YES 5.86 5.86 2.0
S2-GN2411 YES 7.58 7.58 0.0
S3-GN2411 YES 5.86 5.86 2.0
S3-GN2411 YES 7.58 7.58 0.0
S4-GN2411 YES 5.86 5.86 2.0
S4-GN2411 YES 7.58 7.58 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
Slice-2-GN2411 YES 5.86 5.86 2.0
Slice-2-GN2411 YES 7.58 7.58 0.0
Slice-3-GN2411 YES 5.86 5.86 2.0
Slice-3-GN2411 YES 7.58 7.58 0.0
Slice-4-GN2411 YES 5.86 5.86 2.0
Slice-4-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-QSFP Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-1XPAT-SFP Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Modena-0-PHY YES 0.13 0.13 0.0
Modena-1-PHY YES 0.13 0.13 0.0
Modena-2-PHY YES 0.13 0.13 0.0
Modena-3-PHY YES 0.13 0.13 0.0
Modena-4-PHY YES 0.13 0.13 0.0
Modena-5-PHY YES 0.13 0.13 0.0
Modena-6-PHY YES 0.13 0.13 0.0
Modena-7-PHY YES 0.13 0.13 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-2XPAT-SFP-L Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 0.29 0.29 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-1XPITA Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-CXP-2XPITA Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.06 1.06 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8748 YES 0.05 0.05 0.1
Primary-BIOS YES 14.09 14.09 0.0
Slice-0-GN2411 YES 5.86 5.86 2.0
Slice-0-GN2411 YES 7.58 7.58 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-F-SC Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.41 1.38 0.0
Backup-EthSwitch YES 1.33 1.33 0.0
CCC-Bootloader YES 2.03 2.01 0.0
CCC-FPGA YES 2.03 2.03 0.0
CCC-Power-On NO 1.41 1.41 0.0
CPU-Complex-BOOT YES 4.08 4.04 0.1
CPU-Complex-BOOT YES 0.01 0.01 0.0
CPU-Complex-FPGA YES 4.08 4.08 0.1
CPU-Complex-FPGA YES 0.01 0.01 0.0
Ethernet-Switch YES 1.33 1.33 0.0
PLX-8625 YES 0.02 0.02 0.0
Primary-BIOS YES 14.09 14.09 0.0
SMART-iSATA NO 7.05 7.05 0.0
SMART-SATA NO 7.05 7.05 0.0
--------------------------------------------------------------------------------
PROTO-NC6K-ATV Backup-BIOS YES 14.09 14.00 0.0
Backup-CCC-PwrOn NO 1.39 1.31 0.0
Backup-EthSwitch YES 1.33 1.32 0.0
BAO-MB-FPGA NO 1.00 1.00 0.0
CCC-Bootloader YES 2.12 2.07 0.0
CCC-FPGA YES 2.12 2.12 0.0
CCC-Power-On NO 1.41 1.41 0.0
Ethernet-Switch YES 1.33 1.33 0.0
Primary-BIOS YES 14.09 14.09 0.0
Slice-1-GN2411 YES 5.86 5.86 2.0
Slice-1-GN2411 YES 7.58 7.58 0.0
--------------------------------------------------------------------------------
PWR-2KW-DC-V2 DT-PriMCU NO 6.03 6.03 0.12
DT-Sec54vMCU NO 6.02 6.02 0.12
DT-Sec5vMCU NO 6.03 6.03 0.12
EM-PriMCU NO 3.12 3.12 0.21
EM-Sec54vMCU NO 3.19 3.19 0.21
EM-Sec5vMCU NO 3.19 3.19 0.21
--------------------------------------------------------------------------------
PWR-3KW-AC-V2 DT-PriMCU NO 6.02 6.02 1.0
DT-Sec54vMCU NO 6.02 6.02 1.0
DT-Sec5vMCU NO 6.04 6.04 1.0
EM-Sec54vMCU NO 3.12 3.12 0.21
EM-Sec5vMCU NO 3.18 3.18 0.21
--------------------------------------------------------------------------------
Minimum Firmware Requirement
The following table provides the procedures and resources for minimum firmware requirements:
|
After completing an Return Material Authorization (RMA), upgrade the firmware as per the matrix in this link, which also links to PDF copies of the IOS XR Firmware Upgrade Guides |
|
|
For the upgrade procedure, see the Performing System Upgrade and Installing Feature Packages chapter of the Cisco NCS 6008 System Setup and Software Installation Guide |
http://www.cisco.com/en/US/products/ps13132/tsd_products_support_series_home.html |
Other Important Information
-
To uniquely identify a line card as a Cisco device, all Cisco IOS XR supported platforms are shipped with a non-tamper-able Trust Anchor Module (TAM) in the hardware. The Cisco Trust Anchor module (TAm) helps verify that Cisco hardware is authentic and provides additional security services. This feature is supported from Cisco IOS XR Release 7.1.x on Cisco NCS 6000 platform.
-
From Release 6.0, the onePK toolkit is not supported.
-
Country-specific laws, regulations, and licenses—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
-
BFD limitation—If the current PPS (packets per second) is more than 7000 packets per line card (LC) then on upgrading the Cisco IOS XR software to release 5.2.5 or later the BFD sessions may shut down. You can avoid this scenario by adjusting the PPS per LC so that the load on a LC does not exceed more than 7000 PPS.
To know the current load (PPS value), use show bfd summary command. Use the bfd address-family ipv4 minimum-interval command to configure BFD timer.
-
Field replacable unit (FRU) removal—For all card removal and replacement (including fabric cards, line cards, fan controller, and RP) follow the instructions provided by Cisco to avoid impact to traffic. See the Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide for procedures.
-
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Technical Support representative to discuss how to engineer a large-scale configuration for your purpose.
Related Documentation
The most current Cisco NCS 6000 Series Router software documentation is located at this URL:
The document containing Cisco IOS XR System Error Messages (SEM) is located at this URL:
https://www.cisco.com/c/en/us/td/docs/ios_xr_sw/error/message/ios-xr-sem-guide.htmlProduction Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Communications, Services, and Additional Information
-
To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.
-
To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.
-
To submit a service request, visit Cisco Support.
-
To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.
-
To obtain general networking, training, and certification titles, visit Cisco Press.
-
To find warranty information for a specific product or product family, access Cisco Warranty Finder.
Cisco Bug Search Tool
Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.
Feedback