Set attributes for all routes received and redistributed from OSPF
|
Support is added to set attributes for all routes received such as community, local prefix, MED. Set attributes for all routes
redistributed such as tags, local prefix, community.
|
See chapter Routing Protocol Support
|
Route Summarization for OSPF, BGP, and EIGRP
|
Route summarization enables route tables by replacing many specific addresses with an single address. For example, 10.1.1.0/24,
10.1.2.0/24, and 10.1.3.0/24 is replaced with 10.1.0.0/16. Route summarization policies enable routes to be shared efficiently
among border leaf switches and their neighbor leaf switches. BGP, OSPF, or EIGRP route summarization policies are applied
to a bridge domain or transit subnet. For OSPF, inter-area and external route summarization are supported.
|
See chapter Routing Protocol Support
|
Common Pervasive Gateway
|
Two ACI fabrics can be configured with an IPv4 common gateway on a per bridge-domain basis. Doing so enables moving one or
more virtual machine (VM) or conventional hosts across the fabrics while the host retains its IP address. VM-host moves across
fabrics can be done automatically by the VM hypervisor. The ACI fabrics can be co-located, or provisioned across multiple
sites. The Layer 2 connection between the ACI fabrics can be a local link, or can be across a bridged network.
|
See chapter Common Pervasive Gateway
|
Set BGP attributes for routes based on incoming communities
|
Set BGP attributes is enabled for routes based on incoming communities such as community, local preference, MED.
|
See chapter Routing Protocol Support
|
Bidirectional Forwarding Detection (BFD):
Global configuration for GUI, NX-OS CLI, and REST API
Interface configuration for GUI, NX-OS CLI, and REST API
Consumer protocol configuration for GUI, NX-OS CLI, and REST API
|
Support for BFD is introduced, providing sub-second failure detection times in the forwarding path between ACI fabric border
leaf switches configured to support peering router connections.
|
See chapter Routing Protocol Support
|
Maximum prefix limit
|
Support is added for BGP maximum prefix limit.
|
See chapter Routing Protocol Support
|
BGP enhancements to set attributes for action rule profiles and peer connectivity profiles
|
Support is added for the BGP attributes Dynamic Neighbors, Route Dampening, weight attribute and remove-private-as.
|
See chapter Routing Protocol Support
|
IPv6 support and interface policy enhancements
|
IPv6 is supported with EIGRP.
Interface policies are enhanced. In addition to existing interface policy parameters, bandwidth and delay can be controlled
on the interface through the eigrpIfPol attribute.
Added the NX-OS-style CLI procedure.
|
See chapter Routing Protocol Support
|
Interleak of external routes
|
Support is added for setting attributes (such as community, preference, or metric) to enable interleak of routes from OSPF
to BGP.
|
See chapter Interleak Redistribution for MP-BGP
|
Transit Routing Support
|
Support is added for transit routing through the fabric.
|
See chapter Transit Routing
|